Broadcast on Xiaomi (Redmi) What is it?

Over the past few years, all Xiaomi (Redmi) smartphones can broadcast their screen on the TV display. Today I will show how to configure the broadcast of the screen with Xiaomi on TV in one stage.

Broadcasting on Xiaomi what is using the Wi-Fi Display protocol operating system Android using Wi-Fi wireless communication in automatic mode can transmit an image from the phone screen on the TV display in real time.

The convenience of broadcasting technology on Xiaomi is a high level of automatism of setting, the user is available to enable or disable data transfer, other opportunities to influence the configuration.

Perhaps this will seem to experienced users a disadvantage, but for the overwhelming number of ordinary Xiaomi phone owners, this is a huge plus, because if there are no settings, then the function cannot be broken and turned off in an unexpected way, as well as not to affect the quality and stability of the image transmission.

How to enable a TV broadcast from Xiaomi screen

In order for the TV to start a broadcast with Xiaomi, it must satisfy the two requirements:

  • Have a built-in Wi-Fi adapter;
  • Support the Wi-Fi Display protocol;
  • Both smartphone and TV should be connected to one Wi-Fi network.

Check the requirements in the instructions for TV.

Suppose your TV meets the requirements, in this case, the algorithm of actions is as follows:

  • Turn on TV;
  • Unlock Xiaomi, open the settings, find the “Connection and General Access” menu;

In subsequent connections, the TV will no longer request confirmation, the demonstration will begin automatically.

Image from the phone to the TV using USB

To connect, you need a regular USB cable, you can use a complete one, with which you charge the Xiaomi battery.

When connecting by USB there are restrictions, Xiaomi will act as a flash drive, you can view only those media files that are recorded in the memory of the gadget: photo, video, music.

When using a USB, you can’t watch videos on YouTube or from any other streaming service.

  • USB cable connect to the phone and TV
  • On TV, choose source of USB signal port
  • On the phone, choose a photo or video shows that are in the memory of the Xiaomi smartphone

Xiaomi wireless connection to the TV using Wi-Fi Direct

You can display the Xiaomi screen on Smart TV during a wireless connection using Wi-Fi Direct, but this will only work if the model is quite new, this protocol supports and is equipped with Smart TV.

The list of candidates for a successful connection is small, but if you are lucky and SmartTV supports Wi-Fi Direct is the most convenient, simple and effective way.

TV and phone must be on one network, be connected to one router.

Steps for wireless connection:

How to Adjust Screen Settings XIAOMI Mi TV 4S – Change Picture Mode

  • In the Xiaomi settings, we find the item “Wi-Fi Direct” (it is most convenient to do this through the search line) and enter it. The menu will open with the search for compatible devices in which, if the TV supports this protocol, it should appear.
  • Depending on the model and settings, make sure that the Wi-Fi Direct mode is active
  • As soon as you see the name of the TV in the search for compatible devices on a smartphone. click on it, after which the connection will be established.
  • Now when viewing any media content: photo, video, YouTube and any other in the upper part of the phone screen will be a special icon, pressing the signal to be displayed on the TV screen.

Other methods of connection

Naturally, it would be strange if the methods of connection were limited only to Wi-Fi and connecting through the cables. There are several more ways for which you need an appropriate application or modern TV model and nothing more.

This method does not require any wires, but does not allow you to show online broadcasts on the screen and streaming video. The bottom line is that the TV will see the phone like a flash card. To do this, you need that both the smartphone and the TV are connected to one Wi-Fi network, and the Bubbleupnp application has been installed on the phone. Synchronization is very simple and sets up through the application.

Miracast

This method is very similar to the transfer of images via Wi-Fi, but does not require the Internet in any form-the broadcast goes directly, from one device to another. The only condition is that the miracast function is on the TV, and the phone works on miui.

For use, you need to do the following manipulations:

  • Make sure Miracast is on on the TV. This is done through the menu, most often at the “Source” or “Network” items.
  • On the phone, select “Settings”.
  • Select “additional functions”.
  • Click on the “wireless display” item and wait.
  • When your TV appears in the list. choose it.

At the same time, for 2019, some complain about the perching of the video and distorting the image. Such problems are rare and problems with a video sector are very insignificant, but still there are. So, if you want to watch videos in very good quality, then in the absence of the Internet it is better to use the cable.

If you were not able to find this function in the TV menu, check the specification for the device, it usually indicates where you can turn it on. The same applies to information on how to choose images through USB and HDMI.

All methods are quite simple and, if you already have all the necessary applications, and also have suitable cables, then the connection takes about a minute, and sometimes even less. Do not forget to use all the possibilities of your technique.

Image output from the Xiaomi phone to a regular TV

Now we will discuss how to connect your Xiaomi phone to a regular TV user. There are several options: wireless using an adapter, and ordinary wired methods.

Adapter Miracast

One of the most popular wireless methods is Miracast from Intel. But what to do if the TV is not originally designed for this type of conjugation? Then special adapters come to the rescue.

Yes, the cost of the adapter is not entirely budget, but if you want a high.quality and simple display of the image on the screen, you will have to spend money. You can purchase Mirascreen in any good technological store.

Insert the Miracast adapter into any HDMI connector;

We set up viewing on TV, indicate the selected HDMI;

On the smartphone we activate the wireless broadcast. The adapter appears in the list of gadgets available for conjugation. That’s all, ready.

Обратите внимание, что последовательность действий может немного отличаться на разных моделях телефонов и TV.

HDMI or USB

These are the simplest and fastest ways to connect. You just have to connect the HDMI cable to the TV and smartphone and configure playback on the big screen. If the smartphone does not have this connector, use a special adapter.

Subject on USB is easier, but its functionality is very limited. You will not be able to broadcast what is happening on a smartphone in real time, but only get access to files.

Wireless technology, which, alas, will not display the image to the TV. But the user will be able to easily view photos, documents and uploaded videos. For the functioning of this option you will need a special application that is freely available on Google Play.

You can also read more about DLNA on the official Miui http forum: // ru.Miui.COM/Thread-17981-1-1.HTML.

MHL-cable

A good wired method, thanks to which the image appears on a TV in high quality. The only negative is a quick discharge of a smartphone. MHL itself is something between the USB and HDMI cable.

So why not immediately connect with this technology, without resorting to the help of other wired inteys? Unfortunately, not all TVs support MHL. Yes, adapters exist, but the connection is complex and multi.tiered.

Today we talked about how to connect a smartphone to TV, thereby duplicating the image from a small display on a huge screen of a home theater. Which option is the most comfortable and high.quality. each user decides individually.

If you have the opportunity to carry out wireless synchronization, definitely choose miracast. Or use the built.in conjugation function according to Smart TV.

You need to connect by wires? Then either the usual HDMI, or rare, but cool MHL cable.

What is Widi

WIDI (reduction from Wireless Display) is a unique wireless technology developed by Intel. In fact, this system is similar to Wi-Fi and Bluetooth connection. Widi allows you to broadcast from the smartphone display on the TV screen, PC or laptop.

Absolutely any media content, films, games is synchronized. And for this you do not need any wires at all!

The only requirement from the phone is the operating system above Android 4.2 and built.in support Wireless Display.

Check the presence of a wireless display on your mobile device as follows:

  • We find the “settings” icon on the main screen, we enter;
  • We go down to the section “Wireless Networks” and open the item “Additional Functions”;
  • Since almost all modern Xiaomi models support Wireless Display, in the middle of the page there should be an option “Wireless display” with an explanation of “Image output on the screen on the network of the WWI.Fi”. We can only activate the checkmark.

Learn more about Wireless Display and other methods of connecting Xiaomi to the TV in a separate article.

How to enable widi on Xiaomi

Now in line the most important question is how to connect a smartphone to a computer or TV. Pay attention to the prerequisite: the devices should have a built.in WIDI chipset, otherwise external adapters will have to be used, for example, Mirascreen.

Settings on PC

A regular stationary computer or laptop that works only on Intel and Wi-Fi also from this manufacturer is suitable. And then everything is individual: we are looking for “wireless networks” section on PC in “settings” and be sure to activate Wi-Fi Direct. It is possible that the item will be called directly “Widi Miracast”. It depends on the version of Windows.

Next, take the smartphone and activate the mode according to the scheme indicated above. Devices must be converged. If the procedure was done correctly, a wireless display from the phone will appear on the computer.

Setting on TV

This process is almost similar to the above. We activate WIDI on a mobile device and go to the TV. Open “settings”, where we pay attention to the section “Intel’s Widi”. Below should be the name and model of our smartphone (of course, if it includes a wi-fi network). Click on the square, putting a checkmark; Confirm the conjugation on the TV and the phone.

  • If you have Smart TV, the chance of successful connection is much increasing.
  • Two devices should be connected to one Wi-Fi network.
  • In case of difficulty with connecting, you can use special applications that greatly simplify the conjugation process.

How to correctly configure the Xiaomi wireless display

You use the smartphone integration display on a wide monitor, but do not want to see many connecting cables or do not understand the connection systems? At the same time, it is advisable to use the functionality of widi.

In practice, not all users know how to configure a wireless display, as a result of which, using the example of Xiaomi, the image will be displayed directly on the TV.

The option is represented by a unique development of the famous manufacturer Intel, which, in general, repeats the capabilities of the Bluetooth or Wi-Fi protocol, while carrying out the actions of the smartphone on the monitor, computer or laptop. All multimedia content, for example, videos or gameplay, and no cables for connecting are required, are also mating.

To make sure in the presence of the option on a particular apparatus, a number of manipulations should be performed:

  • Find the “settings” shortcut on the desktop and click on the image;
  • In the category of “wireless networks”, select an subparagraph with additional functions;
  • Since the vast majority of relevant mobile devices have the support of the necessary technology, the “Wireless Display” section should be located in the central part of the window with the corresponding description. Click on the section and in the subsequent page translate the lever of activity of the option to the inclined position.
broadcast, image, xiaomi, setting

It is worth noting that in addition to the proposed method, many additional options for connecting a mobile device to TV can be distinguished, some of which also do not suggest the use of cables.

How to use widi on Xiaomi

Next, the most significant stage arises, which consists in the direct synchronization of the device to the TV. It should be made sure that each of the devices is equipped with a built.in WIDI module, since otherwise you will need to use the adapter, for example, Mirascreen.

A computer or laptop is needed that operates on the chipset platform and the Intel manufacturer’s Wi-Fi. Then you should find in the Settlement section category “wireless networks” followed by the inclusion of Wi-Fi Direct. Depending on the modification of Windows, the desired component can demonstrate the name “Widi Miracast”.

Then, in accordance with the above instructions, turn on the WIDI smartphone, after which the synchronization of the devices will follow. With the correct execution of the instructions on the PC screen, the phone integer will be displayed.

Setting on TV

The procedure for setting TV parameters is almost no different from the previously described. Upon completion of manipulations with a mobile device, run the Settings section on the monitor and find the Intel’s Widi category. The latter should contain the name and specific model of your gadget, then select your smartphone for connection by clicking on a small image of the square.

You should also pay attention to some nuances:

  • In the presence of Smart TV, the probability of correct interfacing increases significantly;
  • Each of the devices must be connected to one Wi-Fi access point;
  • In case of difficulties in synchronization, you can use specialized programs that greatly simplify the execution of the procedure.

Answers to popular questions

In fact, the process of wireless connection of the phone to the TV or PC does not cause problems, since it is only necessary to comply with the management in order to display on a wide monitor any film or mobile gameplay without any difficulty.

What is a wireless display on Xiaomi, and how to configure it

Users of modern Xiaomi smartphones have the opportunity to bring media content from the memory of their mobile device on the screen of the TV, projector or computer. To do this, the Xiaomi wireless display is intended for this function. it will be discussed below.

Conditions for the wireless display

For the wireless display, the following conditions must be met:

  • A TV or another device that will receive a signal should be equipped with a Wi-Fi module-integrated or external. It is also possible to connect it through a router or Android TV box in client mode.
  • Both smartphone and a signal device are connected to one router.

Important: if the router is a two.band, both devices should be on the same network.

If these conditions are met, the Xiaomi wireless display function will work correctly.

How to connect a wireless display on Xiaomi

We will figure out what is the Xiaomi wireless display, how to configure this function. No additional software needs to be downloaded, this program is provided in factory settings.

To connect it, we perform the following actions:

  • We launch a special signal reception program on the acceptance device according to the standard of the Miracast. It can be called Miracast, Ez Mirror, Screen Mirroring, Screen Share;
  • Open the program, convert the receiving device to the recreation mode of the signal;
  • On the smartphone we go into the settings and select “additional functions”;
  • In the list, select the “wireless display”, click on it;
  • We activate the function with a runner.

If on the host technique all the settings are made correctly and both devices are on a single network, the receiving device is displayed on the smartphone display. Click on it. and you can start broadcast media content.

In the article, we examined the useful function of smartphones on Android recent versions. It allows you to display media files stored in a smartphone for viewing on a large screen.

Knowing how the Xiaomi wireless display works, you can use your smartphone as a visual aid at presentations, negotiations and other business events, as well as significantly expand the possibilities of entertainment.

What you need to connect

The list will include different components with which you can connect to TV.

  • USB cable.
  • HDMI cable adapter from telephone USB on HDMI.
  • Smarttv Wi-Fi; ;
  • Google Cast;
  • Portable console Android TV;
  • Other adapters.

For some reason you are not happy with a wireless connection? Then you should pay attention to the correct selection of cords. A standard, effective and simple way to connect to a TV is HDMI. These connectors exist on almost all TVs. For the phone you will need to buy an adapter with MicroUSB (Type C) on HDMI.

The simpler method provides only a USB cable, the connectors for which are on almost all modern TVs, even without a smart TV function. Here are just functionality we get a rather weak. Only access to materials saved on the memory of the device appears, while it is impossible to duplicate the images.

Do not want to choose a suitable wire for a long time, besides, the TV is ordinary and does not support modern options? Then a special solution will be a special flash drive of Chromecast released by Google.

Can’t do without Wi-Fi network. For this, a popular wireless connection method has been developed-Wi-Fi Direct, which can be read in detail about below. This should also include special software “by air”. That’s all, we examined the basic set of TV and smartphone synchronization.

How to connect a Xiaomi smartphone to a TV

Below we will consider 8 simple ways to connect a Xiaomi smartphone to TV. Options with an old TV without USB or HDMI, TVs with USB and new SmartTV will be affected.

Immediately note that you should have an adapter from a regular connector on HDMI. For example, on Mi 5 it will be: Microusb Type C to HDMI.

  • We put on the adapter and connect the HDMI cable to the phone and TV.
  • Next, open the TV settings using the remote control, and select “Broadcasting by HDMI”. Ready.
  • If everything has done correctly and there are no possible problems, not only the image is duplicated on the large screen, but also the sound. The quality should not suffer, with the right connection there is no interference, distortions, blurry colors and contours.

If there are no pictures, it means that the reason is in the smartphone itself. Usually everything is configured automatically, but manual editing may also be required. We are looking for the “Settings” icon on the screen, let’s go, now we open the “HDMI”. “HDMIFORMAT” section. It is proposed to choose the frequency of updates and image resolution. We select the parameters corresponding to the TV, since with overestimated options there will be incorrect playing work.

At first the stages of the procedure are the same, but then it is much easier. Duplicate setting is not required, since they are absent. The user can only view music, files, pictures. Similarly to connect to a computer. But this method significantly limits the possibility of viewing files.

TVs with a USB output that support external drives (without SmartTV function) recognize Xiaomi smartphones as an ordinary flash drive and give various files, but others simply do not see the phone, and at best they simply recharge them.

Wi-Fi Direct (only Smart TV)

This is the most common, popular and easy wireless connection, which requires a Wi-Fi network. There is a minus: this option works only on Smart TV.

Check if the TV and smartphone is connected to one router, and if so, then we start.

  • Open the smartphone settings, look for the section “Wireless Networks” and the “Additional Functions” item.
  • Now we click on the item “Wi-Fi Direct” or “Wireless display”.
  • We activate the function of output of the image over the Wi-Fi network.
  • On the TV we turn on the appropriate option and find our smartphone
  • There is a connection between the devices.
  • The broadcast begins. Ready.

The site has a separate article about connecting to TV through the “Broadcast” function. Familiarize.

#ThanPhones: Setting up Your Mi Box

Bluetooth

This is one of the fastest and most convenient ways. You just activate the wireless exchange of information on two devices and easily transmit materials to the large screen.

But, unfortunately, not all TVs have a built-in Bluetooth module. You can purchase a special Bluetooth adapter, which is connected to TV via USB and ensures the output of high-quality images to the TV.

Google Cast

Google’s innovative solution that allows you to transmit photos, videos, music to different devices without using wires. Again, an adapter may be needed here if you have no Android TV function.

Having bought Chromecast, we connect it to the TV via HDMI connector and enter the one Wi-Fi Network. Thus, you can ensure the broadcast of the video on a large screen in high resolution.

Smart TV Box

Another excellent addition that will turn a regular TV into a modern Smart TV. A huge number of prefixes with different functionality, purpose and cost are provided to the user. We recommend that you look at the Mi Smart TV Box (only international version).

Popular wireless connection, identical to standard USB, only without using flash drive, wires and third-party cables. Duplication of the video from the screen of the phone is not carried out, but there is a great opportunity to view images, music, documents.

Requirements: Finding two devices in one common Wi-Fi network, the presence of a special software Bubbleupnp, which you can easily download on Google Play.

Miracast

A wireless connection developed by the popular Intel company Wireless Display (Widi). This standard is supported by almost all modern TVs.

Requirements: version on the Android 4 smartphone.2 or higher. Disadvantages: tangible delays in broadcasting, sometimes the quality is distorted.

Why does the iPhone not connect to Xiaomi TV?

If it is not possible to establish switching between gadgets, there are several reasons for this:

  • The USB cord is faulty, the charger wire is not intended for switching;
  • The device has an outdated version of software;
  • Connections to different Wi-Fi networks are launched;
  • The devices are turned off, removed from each other, require rebooting;
  • If the system proposes to enter a password, restrictions may be active and AirPlay settings are required.

The best switching tool is native software. AirPlay will provide a full, quick functionality for an unmistakable connector of two devices. The only drawback of this solution is the price.

Chromecast remains the easiest solution, but not all Xiaomi TV models support it. If you are not confused by wired connection, use a reliable option. HDMI cable.

Using the Xiaomi wireless display function to work with a computer

To connect, you also need to first prepare a stationary computer or laptop. PC should work on the Intel processor and from the Wi-Fi network of the same manufacturer. It is required to enable the function of the “wireless display” on the smartphone. Next, you need to configure the computer:

The algorithm also depends on the computer model and its operating system. For example, on PC with Windows 8.1 or 10, you need to click on the notifications (the right lower angle of the monitor), click on the section “Connect”. “Projecting to this computer” (is in the list on the left side of the screen). Here you can even introduce the key to ensure security.

note! There is another faster way. to press simultaneously a combination of “win p” keys. On the right on the monitor will appear the “project” menu. Below is the desired section “Connection to a wireless display”. This method works on the Windows 10 operating system.

The stages of connection to PC depend on the version

If the user did everything right, then in the smartphone in the list of devices for a wireless connection will appear the desired computer and the image broadcast will begin.

Problems when connecting and correcting errors

It happens that various problems arise during the connection process. Devices may not see each other or not connect. What can be done in this case:

  • During the connection of the devices, a software failure occurred. In this case, you need to repeat the procedure, it happens even several times;
  • The smartphone does not see another device. It is recommended to restart the phone and device and repeat the setting. Perhaps they are far from each other, so the smartphone needs to be brought closer to the TV or computer;
  • The broadcasting device is outdated and simply does not support this function;
  • After connecting, the image on the TV can hang, since TV is not so powerful and has less RAM, unlike the computer. Interference or black stripes along the edges of the screen are also possible;
  • On the TV, the quality of photos and text documents is better than on PC, but the video is better played on a computer. This is due to the fact that the wireless connection is not as completely as wired;
  • If a computer or laptop has a Windows 7 operating system (not lower), then to turn on the function of the wireless display, you need to install additional software. You need to download the Intel Wireless Display Software for Windows (WIDI) program, which will allow you to broadcast different content from one device to another. After installation on the PC desktop, a shortcut will appear. Having launched it, you need to enable the “adapter” option that appeared in the new window. During the first launch, the software will request to enter the proposed password. Next, you need to confirm the action and put the checkmark next to the automatic connection function in the future, so that the user participation does not need to be involved in the next time.

The “Wireless display” function becomes very popular. It works on the basis of Miracast or Widi technologies and has both advantages and disadvantages. In any case, connecting a smartphone to a TV or PC will not be difficult and is in many respects very convenient way to work with various files, especially if the technique is modern and meets all the requirements.

BYRGPUB.COM 2022