Chest or shoulder
A chest strap is the perfect way to achieve smoothness without using a gimbal. The length of the elastic straps can be changed depending on the size of the person. The camera is attached to the belt using a plastic adapter.
There are several ways to pin an Action Camera. It is important to remember that buying an adapter or retainer may become useless if you DO NOT take into account the mounting location first. Depending on where the gadget will be mounted, the necessary fixture is selected.
Mounting types are conventionally divided according to the place of installation of the camera:
- Body (shoulder, arm, leg, belt)
- Transport (bike, motorcycle)
- Sports equIPment (snowboard, surfboard, canoe, etc.).
Depending on the type of helmet (bicycle, motorcycle, ski), the type of mount is also selected. The same applies to vehicles.
On the head
To solve the problem of how to properly install the Action Camera on the helmet, you can use the plastic mount. But what if a cyclist or other sportsman wants to mount a camera on his head??
This is where a head strap mount like the GoPro Head Strap Mount comes in. It can be used where a helmet can be dispensed with, such as boating or walking on foot. For divers, an excellent solution would be to attach the camera to a special mask.
On the body
Elastic straps are used to keep the gadget securely and comfortably on the body. Depending on where exactly the athlete or blogger is going to fix the camera, the optimal belt length is selected.
Shooting experience shows that a chest strap on the body is the most suitable option for those who care about the absence of a “jumping” picture. I installed the camera in this way, you can do without a stabilizer.
For hunting and fishing
Depending on the requirements for the viewing angle, when hunting or fishing, the camera can be mounted on a special monopod SP REMOTE POLE, which is convenient to hold in one hand. You can also choose a camera with a waterproof housing or a waterproof case. If the device needs to be fixed on the barrel of the gun, an adapter with Velcro or tape is used for this.
Be sure to read Top 5 things for an active summer
Required extension for mounting
The presence of a special plastic extension for the camera lock makes it possible to significantly increase the shooting angle of view, and also allows you to shoot from previously inaccessible angles. Thanks to the telescopic extension of the GoPro Simple Pole, the blogger can independently choose how far to zoom the shooting source. This device is great if you want the athlete’s face to fully fit into the frame.
On the helmet
The answer to the question of how to attach an Action Camera to a helmet depends on its type. The easiest way to fix the device for shooting is on a bicycle or ski helmet. For this, ventilation holes are used, through which a belt with fastening is passed.
On a closed motorcycle helmet, the camera is mounted using a curved plastic platform, double-sided tape and an adapter with hinges. Thanks to this, the angle of inclination of the gadget can be changed in order to achieve the desired view for shooting.
In order not to lose the camera in a sudden impact, it is recommended to use a safety cable.
If the purpose of the shooting involves some distance from the camera to the helmet, you can use an external holder. It is used in cases when the athlete wants his face not only to be completely included in the frame, but also NOT to occupy most of it.
Other mounting methods
There are several options for attaching the Action Camera to a bike or other vehicle. It all depends on where the athlete or blogger wants to shoot from. Some people prefer to mount the camera at wheel level, while others prefer to mount the camera on the steering wheel, on the tank or on the windshield. For each case, you need to select a special adapter, like the GoPro Handlebar Seatpost Pole Mounts, with a suction cup or Velcro. Sometimes staples fit.
The existing fastening methods have both pros and cons:
For fans of snowboarding, surfing or wakeboarding, you need to purchase a set consisting of an adapter with a socket and an adhesive pad for shooting. Due to the fact that this pad has a sticky coating, the camera is attached very quickly. The only thing that the owner of the gadget needs to take care of is that the surface of the snowboard is previously cleaned of dust and dirt.
Removing the adhesive pad is a little more difficult. To prevent traces of glue from remaining on the surface, you need to direct a stream of hot air from a hair dryer to the site for 2-3 minutes. After that, the adhesive base will soften and can be easily removed from the board.
When this camera first appeared on the market, it was positioned as a cheap analogue of the GoPro Hero 4 Black model. This action camera was and remains the best solution for its price range.
The touch screen of the model is convenient for settings.
Photo quality and excellent. However, when buying such a camera, you need to keep in mind that, with a high degree of probability, you will need some additional costs. in particular, the basic package does NOT include a waterproof case.
A characteristic feature of the helmet camera is the increased water resistance of the case, because such a design is exposed to a variety of external influences, such as wind in the city ?, Constant shaking and many other unfavorable factors.
As a rule, action cameras have a powerful battery, thanks to which the device can work without recharging for up to several hours.
A good action camera for a helmet must be absolutely sealed, impervious to shaking and high vibration. It is important that the device is light and compact so as NOT to hinder the user’s movements.
Reliability and practicality requirements are imposed on the microphone of the device and its lens, since sometimes such devices become proof of the user’s innocence in the event of an accident or other emergencies.
Of course, action cameras shoot much better than standard recorders.
The only drawback of such devices is their price. the cost of even the simplest model is much higher than most of the second types of recorders.
Choosing an action camera on the helmet
- Model overview
- Criterias of choice
- How to fix?
The action camera is capable of such shooting that the usual cameras and modern smartphones never dreamed of. due to the increased water resistance and shock resistance of the structure, it is able to withstand truly extreme situations and the most severe operating conditions. In order for it to film everything that happens during the descent from the steep mountain, the passage of powerful river rapids on a boat, as well as when driving at high speeds on a motorcycle, it must be fixed to the headdress. In our review, we will dwell on the features of action cameras for a helmet and help you choose the best model.
Criterias of choice
Renowned action camera manufacturers work tirelessly to improve the reliability and functionality of their recorders. That is why the modern market offers a wide range of models with a wide variety of technical and operational characteristics. Typically, users have the following requirements for devices:
- Light weight;
- Small size;
- Reliable protection against falls and mechanical damage;
- High quality recording;
- The ability to record with the current date.
Important criteria include the availability of Special Helmet Mounts, as well as an increased degree of water resistance. Such a parameter as the degree of view also plays an important role. Despite the fact that manufacturers often recommend recording at an angle of 360 degrees, nevertheless, users consider the viewing angle to be the best option, and not exceeding 100 degrees, since a larger parameter does not have the best effect on quality.
Another important factor when choosing a camera is resistance to drops and vibrations. When moving quickly or walking over uneven terrain, a poor quality camera simply will not be able to record certain moments clearly.
Particular attention should be paid to battery capacity. The recorder should quietly record for several hours offline.
This camera is one of the most expensive models on the market, but also one of the best in the world.
The high price is fully justified by the presence of the optical image stabilization function. It features a floating lens system that balances the movements and keeps the image in the frame stable. The main advantage is that image stabilization works even when shooting at 4K resolution.
New is the ability to detach the display and fix it to any other accessories. For example, on the finger rest. There is a waterproof case for storage. this is a rather convenient accessory in case you take the camera with you on a tourist trIP.
The row and stills captured with this camera are of the highest quality. The user can always choose options for resolution and frame rate. this characteristic is inherent only in action cameras of the highest segment.
Top selling models include several popular cameras.
GoPro Hero 6 Black
Today, GoPro is perhaps synonymous with an action camera, and one of the manufacturer’s best versions is the Hero 6 Black. Its hallmark is the new powerful GP1 processor, which doubled the performance of the device in comparison with all previous releases.
The rest of the enhancements offer improved background sound, high quality low-light performance, and increased dynamic range. In addition, the model offers improved HDR image capture.
One of the most fundamental improvements is considered the option of digital image stabilization, therefore, even in the most difficult shooting conditions and with strong shaking, the image in the frame remains as stable as possible. Of course, the detailing of frames is not at the highest level, nevertheless, it is distinguished by its uniformity in all fragments. As a result, the quality of the shooting is truly stunning and vivid.
How to fix?
The method of fixation should be chosen individually for each helmet.
For cyclists, mounts that secure the camera through small vents are ideal. If desired, the user can always adjust it vertically, and thereby adjust the optimal shooting angle.
Hockey helmets, ski helmets, as well as models for snowboarders are also connected to the camera using an adhesive platform. Usually it is placed in front. this position is considered one of the most successful, since in this case the camera will be able to tightly fix even in the most difficult shooting conditions.
The camera for skiers can be placed on the top of the helmet. in this case, the maximum stabilization of the row can be achieved, while changing the direction of the camera: you can shoot both behind the back and in front.
Platform mounts deserve special attention. Models of the most famous manufacturers predict the presence of thick adhesive tape in the base. If the helmet has a rounded shape, then it is better to give preference to curved platforms. they are correctly fixed on the helmet and neutralize excessive vibration, help to create a clearer picture, which in general makes the most comfortable for viewing. This mount can hold even when submerged in water and does NOT fall at speeds over 300 km / h.
How to attach a GoPro action camera to your helmet
The GoPro action camera is capable of capturing the smallest movement, making it ideal for shooting. Fans of the popular first-person format know that a high-quality camera mount is very important and opt for two types of mounts: a helmet mount and a chest mount. Such fasteners provide freedom of movement, the best view, and reliable fixation. By using them, we get crisp, dynamic. Which you can brag to your friends. And from the most successful shots to edit the whole film.
Helmet mounts are one of the most popular among cycling enthusiasts. Inveterate extreme lovers. Bloggers and other GoPro camera owners. Therefore, today we will talk specifically about THESE mounts. Their types. Installation methods.
Mounts must be selected for the Helmet used. Paying attention to the quality of the material. It does not have to cause a drop of doubt. After all, we do NOT want to lose the camera in the forest or on a snowy slope.
Cycling (ventilated) helmet
The GoPro Vented Helmet Strap Mount is perfect for this helmet. Fixing your GoPro HERO action camera through the vents. Thanks to the special gasket, the camera will not slIP. And the vertical adjustment allows you to adjust the desired shooting angle.
If your helmet has a visor with holes. You can also use a ventilated bicycle helmet mount. Secure it through these holes. As shown in
Otherwise, attach the camera to the adhesive platform. So that the mount does NOT interfere with the opening of the wind protection. It is worth attaching the camera to the side. GoPro Helmet FrontSide Mount allows you to rotate the camera 360˚ without removing it from the helmet, and also shoot backwards.
Sometimes the camera is mounted on top of the helmet. Closer to the back of the head. Focusing on the edge of the folded back protective glass. Use J. Latch or SP Swivel Arm Mount, these will help increase the distance from the platform to the camera, and the helmet will not interfere with the view of the lens.
Helmets for snowboard, alpine skiing and others.
Just like on a motorcycle helmet, the adhesive platform is convenient for attaching a GoPro action camera by placing it in the following places:
The front is one of the best positions as the camera will grIP even under the most extreme shooting conditions. Use the SP POV Extender, which is a special outrigger that mounts onto a platform. He will help to shoot himself, while Capturing everything that happens behind you in the frame.
On top of the helmet. Allows you to achieve a fairly stable picture. At the same time, changing the direction of the camera, it makes it possible to shoot as in front of you. So it is behind the back. I bought fasteners with a hinge base. You can change the angle in one motion. Getting an interesting series without difficulty.
Sideways. The camera is easier to operate. Change the angle of inclination. Shooting can also be done in two directions.
What about platforms ?
It is better to choose a mount from well-known manufacturers with 3m tape at the base. The helmets are rounded. Therefore, choose curved platforms. High quality. Correctly fixed platform. Fixes the camera securely to the helmet. Removing the unnecessary vibration. Making the picture clearer. And more pleasant to watch. There is no need to doubt the reliability of such an attachment. The adhesive platform will keep even in water. After all, companies are manufacturers. The likes of GoPro test the durability of an accessory. Testing it at speeds over 300 km / h.
Before fixing the platform. Select the most suitable place for maximum contact between the base of the mount and the surface of the helmet. Considering. That helmets often have a ribbed surface. Ideal mounting location. You may have to search. If there is only a suitable surface on the back of the head. Where to mount the action. The camera is completely useless. Choose a location based on the best camera angle. And go around the relief. By cutting off the interfering parts of the adhesive base of the platform. This will provide better grIP on the helmet. Using glue pads. Be sure to follow the manufacturer’s recommendations. Before installing the platform, thoroughly clean the surface of the helmet from existing dirt. Use a cotton ball or soft cloth. Moistened with alcohol-containing solution. DO NOT use strong solvents. They can damage the paintwork of the helmet. You get unsurpassed hold when the installation site is clean. Dry. Low fat.
After the selected area on the helmet is cleaned and dried. Take the platform. Remove the film. Tight. But press gently. Note. The main thing is not the time of contact. And the force of pressing. 30 seconds should be enough. While doing this, watch out. So that the platform evenly adheres to the surface of the helmet from all sides.
After 24 hours. When the glue has finally set to the surface of the helmet. The mount can be used.
By purchasing an additional fixation kit. Consisting of self-adhesive pads and safety straps. If the camera is for what. That is why it will fall off the mount. An additional retainer will hold it. Safety base. As well as the platform. It should be taken only with 3m tape at the base. And when placing it, select the optimal distance. Making sure you have enough safety line length.
How to attach an action camera to a helmet?
In order to capture the bright moments of life, you need an action camera that will create high-quality photos in any extreme conditions. Manufacturers offer users a wide range of mounts for such devices, including those with a helmet. Consider the rules for their installation, as well as some recommendations of experts.
Helmet mount types
Here are the options for fastening the level of dynamic and quality depends. The most common option for fixing an action camera is to place it on the helmet. This provides freedom of action and an excellent viewing angle. Fasteners suitable for motorcycle, bicycle and ski helmets or skateboarder helmets.
There are different types of fixation.
- Straps. Elastic straps or rubber bands are threaded into special holes on the helmet, thus fixing the camera.
- The articulated mount is used to obtain a wider viewing angle. The fastener has the ability to rotate 360 degrees.
- The extension allows the camera to be removed from the helmet using a special design.
- Adhesive platform. The adhesive-backed mount provides a secure hold on the camera. In this case, the retainer can be used in strong wind or precIPitation.
Cyclists and skiers often opt for a strap and rubber mount platform. You can also use Velcro fasteners for the helmet. Such options make it possible to change the position and viewing angle. Universal holders are suitable for various models of helmets and action cameras.
Retainers with ventilation holes are made for ski helmets. They use straps made of elastic material, which are threaded through the holes and fixed. This option can be used for bicycle helmets and skateboarders’ helmets. But it should be borne in mind that this type of fixation is not applicable to motorcycle helmets. In this case, a kind of stand is chosen, which is fixed to the surface of the helmet using double-sided tape. The swivel mount allows the camera to rotate 360 degrees. And also the device has a special knee for changing position.
For a motorcycle helmet, you can choose a fixation with a turntable. There are forehead models and clIPs to fit on helmets. For extreme conditions, special latches are made.
The hinge fasteners can only come off on impact. In order not to lose the device, it is fixed with a safety cable.
There are remote platforms. L-shaped design is equIPped with an elbow to remove the camera. It is used in cases when it becomes necessary to remove oneself. Fastening is provided by an adhesive platform. An extension cord can also be attached to the Velcro platforms. The design will not only allow you to shoot yourself, but also capture everything that happens in the background into the frame.
Before attaching the device, it is necessary to choose a place on the surface of the helmet, where the maximum contact of the retainer with the helmet will take place. Many models of safety helmets have an embossed surface. The relief can be circumvented by cutting off some parts of the adhesive platform of the retainer. This will give the best grIP.
The helmet must be cleaned before attaching the retainer. To do this, use a cotton pad or rag soaked in alcoholic liquid. Strong solutions are not recommended. This can damage the coating. Such a procedure before fastening will provide a more reliable fixation on a degreased and clean surface. When using adhesive backed clIPs, follow the manufacturer’s instructions carefully.
When installing the fastener, you must press it against the helmet. This should be done carefully and the pressure should be adjusted. It is necessary to hold the device for half a minute. It is necessary to ensure that the contact of the clamp with the surface is as tight as possible. After that, the helmet is left for a day to completely dry the adhesive base.
The easiest way to attach your action cam to ski and bike helmets. They have special holes in which a belt with fasteners is threaded. Holes are located at the top or side.
When choosing a holder for an action camera, it is recommended to additionally purchase a set of self-adhesive bases and belts for belay. If there is a moment when the device can suddenly fall off the fastener, then the additional strap will prevent it from falling. The safety base, like the platform, must be selected on 3M adhesive tape. When placing the safety base, you need to choose the optimal distance, which is selected Based on the length of the cable for belay.
A curved platform is best for helmets. A high-quality platform provides a secure mount for the action camera and eliminates unnecessary vibration. At the same time, it makes the picture clear and pleasant to look at. Do NOT be afraid that the mount will fly off or come off. During production, the devices are tested at speeds up to 300 km / h. over, such mounts are very reliable in use under water.
Action cameras allow you to shoot quality content in any conditions. For reliable fastening of the device, special clamps are used, which differ in the methods of fastening. The most convenient option is to mount the action camera on the helmet. This will allow you to shoot Dynamic while motocross, cycling or skateboarding. The choice of a platform depends on the direct purpose and conditions in which the device will be used.
In the next one, you will learn how to properly attach an action camera to a ski helmet.
How to attach an Action Camera to a helmet
and more extreme lovers are buying action cameras in order to capture their adventures. But how to attach an action camera to a helmet?
In today’s article, we will show you what mount and where is it better to attach your GoPro, SJCAM or XIAOMI YI action camera to the helmet.
The mount in question is suitable for any type of helmet: ski, cross, open, transformer, intergral, etc.
As a rule, adapters are used for fastening with glue in a curved shape (since most helmets have a rounded shape anywhere):
The adapter consists of 3M double-sided tape and a flat pad for the base clIP:
We glue the tape to the site, and then to the surface where you want the camera to be located. Of course, the surface must be clean and dry. Also, for best reliability, the tape should be completely flat against the surface.
We hasten to warn you that the site is glued “forever”. Thanks to this. reliability. You will NOT be able to tear off the platform with your hands. Glued tightly. There are ways to peel off the pad by heating it with an industrial hair dryer, but that’s another story and there is a high probability that you will damage the helmet or other surface on which the adapter is glued.
Used action camera for skiing, cycling, motorcycle, etc. You can be 100% sure that this adapter will NOT come off.
The most popular place to mount action cameras GoPro, SJCAM, XIAOMI YI on ski and other types of helmets. Top center.
First, the camera can be directed both in front and back. That will allow you to shoot everything that is in front of you and everything that is behind you, respectively;
Secondly, you can configure the camera so that nothing extra will get into the frame (for example, a “piece” of helmet)
Thirdly, by gluing the pad in this place, you can use this extension cord:
This mount looks like this:
And allows you to Get such frames:
And finally, this place for attaching the camera to the helmet will allow the use of “wearable” stabilizers, for example FEIYU WG, FEIYU WGS or REMOVU S1
The second most popular helmet mount is on the side, as in the photo above. Why? Sometimes, simply because the shape and geometry of the helmet does not allow gluing the pad on top.
For side mounting you need an extension adapter:
Otherwise, the camera will be attached sideways and will shoot accordingly. The adapter will help you set the correct angle.
There are other modifications of these adapters that may suit you better.
And the third most popular mount for action cameras GoPro, SJCAM, XIAOMI YI on the helmet in the center, on the chin.
It will allow you to get unique first-person shots, but has disadvantages:
1.Can hitch protection or shoulder when turning head;
2. Very few helmets of a suitable shape with a place to attach the pad;
3. On the “open” helmet there are simply places where you can apply this type of attachment.
You can use various adapters and glue the pad on the side, but this is individual and depends on the shape of the helmet.
On the eve of the 2018 cycle, I decided to try to shoot not from the steering wheel, but from the bike helmet.
The mount is a quick release platform and will fit any camera.
According to the instructions, the platform is fixed on the helmet with straps
Mount the pad on the helmet mount the pad on the helmet
I decided to try to fix the platform on the visor so that the camera does not stick out on the top of the head
Mount the camera to the visor mount the camera to the visor
In fact, pornography turned out, the platform dangles and a pile of straps and clamps on the visors
Attaching the camera to the visor
Our hands are not for boredom, we take a screwdriver and make a couple of holes
Strong platform on a screed and now everything is holding up as it should, and we are becoming like ants 🙂
Strong pad with tie rods, support pad with tie rods
However, this idea failed, because K. Boxcameras already have an impressive weight and give a load on the neck, and traveling with such a load for about 5-6 hours is NOT an option at all. It turned out beautifully, comfortable, but the center of gravity is strongly shifted forward.
Now we will attach to the top of the head, this will relieve the neck
Attaching the action camera to the top of the helmet
Here I also fastened with clamps, but the straps do not badly with this installation, although the platform will still fidget under the weight of the camera.
Action camera installed
Test drive and the camera shoots from the head like this:
However, I did NOT like how the camera shoots this type of straight-line rides.
Another question when it’s something like a trIP on an ATV:
Therefore, for the bike section, I again screwed the camera onto the steering wheel:
This article will discuss where, and most importantly, how to attach the action camera to the helmet. During the operation of action cameras in conjunction with motorcycle helmets, it turned out that the issue of attaching the camera to the helmet is very relevant, especially if it is a motocross helmet. But more on that later. As a rule, a standard set of action cameras includes two platforms with an adhesive base. One platform with a flat base. Everything is simple here, I found a flat surface, degreased, glued and corrected the angle. The second platform with a spherical base (the surface of the base is concave inward). These pads are oriented towards the upper center point of the helmet, as they have a symmetrical design. I have all motocross or enduro helmets. This is where problems are observed in 99.9% of cases. There are two main options for placing cameras on a helmet. For this, a platform with a base concave inward is used. The first option is when the mounting plate is installed at the top of the helmet along the axis of symmetry. Basically, this is how goupro form-factor cameras are placed. True, with such an arrangement, they were not a little torn off when pokatushki outside the city. If at the same time there was no safety cable, then the likelihood of finding a camera in the forest is like the saying about needles and haystacks. The second option for placing the camera is to mount it from the side of the helmet on the left or right. I personally prefer this option. With this arrangement, the camera is perceived as in the first person, in contrast to the option when the camera is on top. Tried accessories camera on the side of motorcycle helmet. Where the desired angle is, there are places where there would be a contact patch of the site at least 50%. Perhaps the manufacturers were guided by the standard configuration motorcycle helmets without much design sophistication. Cross-country helmets are distinguished by the presence of additional ventilation elements and a visor. In general, neither Sony nor goupro fit so well.
It was noticed that on a glossy surface with contact spots of up to 60%, the platform with the camera is very confident. Also, there was an experiment with non-original ZM tape on a matte helmet. Attached the platform to the side. The surface contact was about 30%. At night, the platform with the camera fell off. Since competitions were scheduled for this day, there was nowhere to go and had to quickly re-glue everything. Now the relevance of the safety cable was more than ever. The camera successfully held the helmet all day. The fact that the camera was not securely mounted was very annoying, since usually everything happens NOT on time. It was necessary to do something with the geometry of the base where it was planned to fix the camera. There were different solutions, but only one aroused trust.
This method is very simple and does NOT take so much time. The main thing is to approach this matter in detail, since epoxy resin will be used and you can, in a hurry, make a helmet and everything around.
So let’s get down to business. The first step is to try on the site planned for installation and choose a place. In the process of fitting, we had to cut off part of the platform, namely the element for fixing with a belt. After which the platform perfectly fit into the helmet.
Mark the boundaries of the selected place with a marker.
Next, we disassemble the helmet. Dismantle the visor and visor.
Now you need to put a stretch film on the helmet. It is thinner than a plastic bag, so it is better to repeat the geometry of the surface. Next, a side is made of plasticine. In total, you should end up with something like a small bath, slightly larger than the marked area.
After the side is ready, we check for polyethylene folds that have appeared. If there are folds, then gently stretch and press the film to the surface of the helmet, if not, then immediately proceed to sealing the sides. We carry it out with a small screwdriver, slightly smearing the base. After sealing Mix the resin with the hardener. You also need to stock up on a medical syringe. He will need to pump out excess resin.
Next, pour the resulting substance into an improvised container made on the helmet.
Now gently lowers the pad into the resin. As the immersion proceeds, it is necessary to control so that the part does not sink completely, and at the slightest suspicion of resin flowing onto the working part, pump out part of the liquid. After the site has ceased to sink, it is necessary to position it. To do this, with the help of a flashlight, you need a resin gap and, according to the marks applied on the surface of the helmet, adjust the part.
The setting time may vary depending on the type of resin and the amount of hardener. In order not to sit and watch, I left everything the next day. After solidification, we remove the structure.
Peel off the polyethylene. It comes off easily. The resin does not come into contact with it.
Next, peel off the plasticine.
It also peeled off easily, as it was previously covered with silicone grease.
Now trimming off the excess, repeating the original shape of the site perimeter.
The final finishing of the shape is convenient to carry out using a burr machine with an attached attachment in the form of a cylinder with sandpaper.
Trying on the treated pad to the helmet.
Next, double-sided tape ZM is glued to the base and cut along the contour.
At the end, the perimeter of the site is painted with auto enamel.
The site is ready for installation.
Now the main thing is not to miss the positioning when gluing. Until the protective film is NOT removed from the tape, you can practice how it will be directly in the fixing process. When degreasing the surface, be careful NOT to erase all positioning marks. Camera mount plate installed.
Trying on a camera aqubox.
Now trying on action cameras with aquabox.
This is the work done to securely mount the camera on a motorcycle helmet. The design has been successfully tested at regular competitions.
Attaching the Action Camera to the helmet
You can mount the Action Camera wherever you have enough imagination with our extensive range of GoPro mounts. In order not to get confused in a large selection of mounts, we have prepared a special review article so that you can find out how and where you can mount your GoPro.
Mount Action Cameras GoPro, SjCam, Xiaomi on a helmet.
Perhaps the simplest and most popular camera mount. You can attach the Action Camera to the helmet using a special strap, which is threaded through the ventilated holes on the helmet and tightened so that the camera remains stationary. Such a mount is able to withstand all your extreme
What types of shooting is the helmet-mounted camera used for? This mount received a lot of love in bicycle bikers. The camera is fixed for any helmet size and DOES NOT interfere with movement. Shooting from this angle is very interesting since the view comes from the first person, as if the viewer sees everything with your eyes. Wearing a helmet It is not only convenient to arrange a downhill downhill to a big one, but also to ride a bike with a breeze.
Helmet mount types for motorcycle helmet, bike helmet and paintball game
Motorcycle helmet mount Action Camera GoPro
To begin with, it’s worth dividing motorcycles into 2 types. It is road and off road. Accordingly, the mountings in them will be different.
Road bikes can run at very high speeds and can cause discomfort when the mount is in the wrong position. For high speeds, a standard curved adhesive pad and a turntable are ideal. Due to the low mount base, there will be no large air resistance and no discomfort. We recommend fixing them on the top of the head.
For motocross and off-road conquest, adhesive pads are also suitable, but with additional sections for adjusting the angle of inclination. We recommend placing the camera in the ear part, as a branch can demolish the camera on the top of the head and you won’t even notice it.
Attaching the Action Camera to the helmet.
The most optimal for cyclists. It is fastened with a strap through the vents in the helmet. The mount is very reliable and at the same time you can always remove it, unlike glued platforms. But if your helmet has holes and is not ventilated, then you can use adhesive platforms as well. Platforms.
Action Camera Mount for Jumping and Rope jumping.
Here you can “play” with the fastening options, since the external mount on the helmet “works out” very well. It allows you to shoot Not only what is happening ahead, but all the emotions that are displayed on the face, believe me. It’s worth it! It is not recommended to use additional sections in this area, as there is air resistance and high speeds in the motorcycle area, and all structures between the camera and the platform can cause the loss of the GoPro during the jump.
Helmet mount for winter sports.
A standard curved platform that sticks to the helmet will do. At the same time, it is not recommended to glue the platform with the camera on the ear part, since if it falls, this can cause additional injury.
For example, you decided to go water skiing and for this you put on a helmet and decided to attach a GoPro camera to it. We recommend using adhesive platforms as they have a low base and the camera will NOT fly off or sink if dropped into water. We do not recommend using mounts with additional sections, as they will create excessive pressure when dropped into the water and may fly off. In order not to lose the camera, we also recommend attaching a float to it. Then you don’t have to worry that the camera will sink. The yellow float can be seen from afar and it will NOT be difficult to find the camera in the water.
Action Camera mount for playing paintball (airsoft)
Regarding airsoft. You have already been taken care of and all you need is a special base for a night vision device, to which the GoPro is attached to a mount for an army helmet.
Popular methods and fasteners for mounting on a helmet:
- Helmet strap for GoPro. Fits any helmet with vents.
- Adhesive pads for attachment to the Action Camera helmet. With a curved pad and adhesive tape, they easily attach to any curved surface like a helmet. Simply select a mounting location, remove the protective film and press firmly onto a clean helmet surface
- Swivel platform. Helmet pad. The material and mounting system is the same as in the described platform, but this mount can also rotate 360 degrees. With the help of a special latch, you can fix the selected angle and position, which is much more convenient than the fixed position of the camera.
- External helmet mount. Allows you to get a unique view and shooting angle. Now all your emotions will be captured by Action Camera.
How to properly glue the platform to the helmet?
To keep your camera securely on your helmet, we advise you to follow THESE simple rules:
- The surface of the helmet must be perfectly cleaned and always degreased.
- The surface of the platform should fit snugly against the surface of the helmet, for this, make every effort to press.
- The platform mount should only be glued to the plastic part.
- It is worth glueing only at positive temperatures, in the absence of high humidity and dust.
- After touching, hold the pad for a couple of minutes (2-3 minutes) so that the glue seizes well.
We recommend that you warm up the adhesive surface with a hairdryer for about a minute before gluing. The glue will become liquid and viscous, which will allow you to fix the platform almost “tightly”.
Whichever mount you choose. It will securely attach your Action Camera to your helmet and capture whatever you want. Our consultants are always ready to help you or suggest which mount is right for your purposes. Come with your helmet to choose the most suitable mount for your Action Camera.
How to attach an action camera with a strap
The easiest and most inexpensive way to mount on the camera, in demand by cyclists. To do this, you need to thread a strap that tightens in the Special ventilated holes, which are located on the top of the helmet or on the side. The camera will be securely fixed and will remain stationary. Models in the mid-price segment have a special anti-slIP gasket.
Photo: Attaching an action camera to a helmet using a strap
This type of mount will not only allow you to avoid losing the camera, but also help to withstand any extreme tests.
Perfect for those who are recording. While on the move at high speed. A special device allows you to turn the camera at any angle and direction without having to take off your helmet.
These mounts are particularly durable as users often shoot in high wind conditions. For this, GoPro recommends mounting the camera on the side.
The extension cord is chosen by those who practice alpine skiing and snowboarding. The device is attached to the front, while fixing what is happening behind the athlete’s back. This type of attachment has a special outrigger design that allows you to remove it as if from above and at an angle.
Action camera on the helmet: which mount to choose?
Action cameras are in great demand among consumers, as they are ideal for recordings. The device captures every movement, eliminates the need to hold the camera, portable and does NOT take up much space. Best suited for use in extreme conditions.
Those who often shoot in the first person format know the role of the mount. The result is dynamic and high quality. One of the most reliable ways to secure your action camera is to place it on your helmet. How to do this, and will be discussed in this article.
- What types of slap mounts are there for action cameras
- How to attach an action camera with a strap
- Swivel mount
- Which platform to choose for an action camera?
What types of slap mounts are there for action cameras
- Swivel mount;
- With adhesive platform.
Which platform to choose for an action camera?
Fastening is done manually, so you need to be especially careful. Give preference to well-known manufacturers whose products have at least 3 m of tape at the base.Remember that all helmets are rounded, so opt for platforms with a curved base.
It is very important to find a suitable platform and secure it properly. It depends on whether there will be vibration during recording. How clear the will be and how pleasant it will be to watch. How to attach the platform to the helmet:
- Examine the helmet carefully and find the smoothest surface (only plastic base is used for attachment). It is possible that only the back of the head will be the place without ribbed planes (and in this case, Fixing the action camera is useless). Trim off excess parts of the glue base and select the most suitable place for the angle.
- Be sure to clean the area of dirt and dust before sticking. We recommend that you take a dry cloth and soak it in a solution with alcohol. If the surface is degreased and clean, then long-term fixing is ensured. Do not use solvents as they can damage the helmet coating.
- Remove the film from the platform and press to the selected area. The force of pressing is more important than the contact time (many manufacturers recommend holding it for no more than 30-45 seconds).
- DO NOT use the helmet for its intended purpose within 24 hours. During this time, the adhesive will bond to the base of the helmet and the platform will become stable.
There are many ways to fix an action camera. The only rule that must be adhered to is the choice of the most suitable mounting option, depending on the area in which the action camera is used.