Wifi SD Card For Your 3D Printer. Chris’s Basement

How to turn a wired printer into a wireless

You have a wired printer at home, but deep down you are most interested in a wireless printer. The problem is that you have no extra money to buy this wireless printer. What are your options?

Well, you can turn your wired printer into wireless with several tricks. It will not be so easy compared to a real deal, but if you are ready to work, you may not have to buy a new printer now. In the end, you can understand that buying a wireless printer would be a waste of money. You have four ways:

  • Use the hardware device of the print server
  • Share your printer from Windows 10
  • Connect the printer to the router via Ethernet.
  • Buy a wireless adapter

We will discuss this from a more detailed point of view.

1] Use the hardware device of the print server

Windows programs, mobile applications, games. Everything is free, in our closed telegram channel. Subscribe 🙂

We decided to start with the discussion of the printer server box. This is a small box designed to connect to a computer via USB. After everything is configured, you can access your printer from a remote place.

If desired, you can print any document from anywhere in the world. These devices can not work on all printers; Therefore, you will need to check the manufacturer’s website to find out if your.

Print server setting option

The section will be considered on the example of TL-WPS510U. Using a Wi-Fi print server is possible in several versions:

By default, Wi-Fi printer is configured to work direct connection from server to laptop (Peer-to-peer). Default settings are as follows:

  • Username:
  • Password: 0000 (or admin).
  • AD-HOC wireless connection mode (Peer-to-peer).
  • Channel 1.
  • SSID (Wi-Fi Points)-Wlan-PS.
  • IP address-192.168.0.ten.

Setting up a print server for communication with a router and binding to a home local network (infrastructure mode):

  • Since the default adapter works in AD-HOC mode, it must first be connected to a laptop via Wi-Fi.
  • Connect the module to the printer and include both devices to the power supply network. Wait for 40 seconds while the device initializes the settings.
  • Using a laptop, open a list of wireless networks and connect to the Wlan-PS access point.
  • Then open the “control panel”. the “network control center and total access”. “change in the adapter parameters”. PKM on the active network. “properties”. “TCP/IPV4”. IP IP laptop so that both devices are on the same network. Mask subnet
  • You can first register (if the network is already created, but not active), and then connect.
  • Reload the print server and, if necessary, connect again to the wireless point.
  • Open the browser line and enter the control panel (address 192.168.0.ten).
  • Go to Setup-TCP/IP and set the values ​​of the IP address for the print server, depending on the network range in which the router is located. If the IP address of the router is 192.168.one.1, respectively, indicate the address in this range for the adapter Wi-Fi, plus write the address “Default Router” and click “Save and reboot”.
  • After a rebut, return to the network settings from the laptop and put the TCP/IP to receive the address automatically (or put it at a level higher in the same subnet, for example, 192.168.one.eleven).
  • Then again connect to the wireless wi-fi adapter.
  • Go to the print server settings page to set the Wi-Fi parameters in accordance with the settings of the main wi-Fi router. This is done in the Wireless section.
  • Replace the IP laptop again, but this time put up “get automatically”. And connect to the Wi-Fi point of the router.
  • To make sure that the Wi-Fi adapter has become part of the local network, go to the admission of the router and check the MAC address of the devices operating in it. The adapter Wi-Fi can be viewed in the “System” section.

Using a specialized utility, you can configure the operation of the module paired with the printer to interact with any local computer.

To connect the printer to a wireless network, the so-called “print servers” are used. They are connected to the peripheral gadget via USB-B. There are devices that serve as a wired bridge to connect the printer to the router. There is also a Wi-Fi adapter for a printer that can be connected directly to the laptop through an access point, or through a router, after setting up the print server as a repiter for the access point of the router.

If you have questions, or want to share your experience, Valcom in a commentary. Readers’ response is the best reward for our authors! Thanks to all!

Through USB to the router

Let’s start with the simplest method. We will connect the printer to the Wi-Fi router via USB port. With modern devices, everything is very simple-we look at the support of the print server in characteristics, if it supports, we stick the cord and everything works almost immediately. The only thing that can be done through a web configurator is to turn on or off the printer.

Another thing is that some models request the use of special programs. We will deal with them on the example of popular printer models-ASUS and TP-Link. Personally at TP-Link, I did not feel problems, but suddenly someone will be useful.

ASUS routers

This company for quick search and settings for the conjugation of its routers with printers has developed a separate utility. Printer Setup Utility. Successful work with Canon, Epson, HP printers is guaranteed.

ASUS printer plan for Wi-Fi:

  • We connect the printer via USB to the router.
  • We ourselves connect to the router. through the air or wire, it does not matter.
  • Download from the official website of Asus Printer Setup Utility and start it:
  • Everything should be successfully exposed. After that, you will only need to add the printer to the operating system itself. there is nothing just like that (this is done once, more on this will be a section below). But if any problems suddenly arise, this window will jump out:

If such an error suddenly happened, it is recommended to once again check all the connections and restart all the devices involved in the setting. a router, printer, laptop. Very often saves.

TP-Link routers

The owner of such a model, therefore only by his own example. Source router. 1043nd, printer. P1102W. Procedure:

  • We connect everything again. the printer to the USB router, the laptop. to the router.
  • From the TP-Link website, for your model, we download the program for connecting the printer “TP-Link USB Printer Controller”. Seeked easily, you will find without problems. It is with its help that the configuration occurs. Launch:
  • Click “Next”. We are waiting until the utility is established. At the end of the installation, the program can be launched right from here or click on the label created on the desktop:
  • All! With each attempt to print, the printer will automatically connect. The main thing is not to forget to include this controller. If suddenly you want the program to be loaded immediately. we activate such a daw in “Tools. Settings”:

Better watch the video at once at the beginning of this section-there are possible connection problems, and the launch of the print server, and the example of printing.

Connection via Wi-Fi

Many modern printers of printers know how to directly connect via Wi-Fi to a router without extra wires. And as a rule, they use WPS technology. the same button that allows you to connect to the router without entering a password. Examples on models below.


  • Click the WPS button on the printer. the indicator on the printer should start flashing.
  • Click WPS on a router.
  • Printer and router must connect. The indicator will stop flashing.

Some models with indicators can request the necessary networks and password. but for me, this is extra body movements for the printer. So it’s easier through WPS. Bright representative of the genre in this category. MG3540.

Hughs never stayed either. For connection, a whole menu of wireless networks is usually provided. But easier to use the same WPS button. For connection, the HP Auto Wireless Connect technology is used.


All the same. there is a separate menu “Wireless Lan Setup”, and there is a standard WPS button. We connect and start setting.

TP-Link settings-USB

And this is precisely my case. I show on the example of the router TP-Link TL-WR1043 and the printer HP P1102.

  • We connect the printer to the router. I have an appropriate indicator of a connected USB device-we check that the bulb caught fire. If you do not light up, do not forget that the printer still needs to be turned on (we look that light bulbs burn on it).
  • We download and install the utility from the TP-Link website (use the search) “TP-Link USB Printer Controller”.
  • If everything was connected correctly, the utility itself will find your printer:

In my case, it took a laptop to download a separate driver for the printer. To accelerate the search, you can temporarily connect the printer by USB to your laptop-then the drivers will be installed automatically, and in the future already use it through Wi-Fi. Perhaps your driver will be installed immediately without such manipulations.

Additionally, in the router settings, you should make sure that the print server works:

Printer and router through Wi-Fi

If you have a printer immediately with Wi-Fi support, most of them are now simply connected to a router using WPS without a PIN code. Next, find out the issued IP address and put it into your operating system as a network printer at this address.

Now more. The first step we connect the printer to the Wi-Fi router:

I recommend that the way to connect your printer clarify in your operating manual. You can’t guess here for all printers. In addition, do not forget that current printers mainly work only with 2.4 GHz networks. Modern 5 GHz network may simply not be visible to them.

  • We start setting. Type of device. “TCP/IP device”. IP address-IP router, does not write anything to the port (it will be filled itself). We remove the driver with the auto installation of the driver:
  • Next, the driver installation will begin. If the checkpoint with the automatic installation is left and believe in it, everything should be set on its own. Otherwise, download the driver and put it with your hands:

How to make your printer wireless using Wi-Fi router

From this text you will learn how to make a wireless from a regular printer, just by connecting to a router. If this method does not work on your printer, you can connect it to PC and use it together with other devices of your network.

Follow the following actions, and they will help you make with a router from a simple printer. wireless.

  • Check the presence of a USB-sharing on your router-usually located on the rear panel. It will allow you to connect the printer to the router through the USB-USB cable, usually included in the printer supply kit.
  • If necessary, purchase an Ethernet-USB adapter. If a router without a USB port, you need to buy an appropriate adapter that can be inserted into one of the network ports.
  • Put the printer closer to the router. The printer should be close enough to the router so that you can easily connect the cable without bending in places of joints.
  • Now you can connect the printer to your router. If you had to resort to the help of the adapter, then first insert it into Ethernet, and only then connect the printer.
  • Now connect the printer to the nutrition. You may need an extension cord for this.
  • Turn on the printer.
  • Wait for about 10 minutes. This should be enough for the router to recognize and integrate the printer into the network. Internet speed can fall for several minutes, while the router sets the right drivers.
  • Now try to find a printer on the network. Just make sure that your computer works on the same Wi-Fi network as a router with a printer, and then do the following:
  • If you have Windows. find the “Start”, where go to “Settings” and select “Devices”. By opening “Printers and scanners” you will need to “add a printer or scanner” and select the desired device, then click “Add the device”.
  • If Mac. Open the Apple Manu and immediately go to “System Settings”, then to “Printers and Scanners”, where select a tedious printer and clap “Add”.

Can We Make Non Wireless Printer Being A Wireless Printer With HP Blutooth Dongle?

USB cable to the router, this option is not suitable. They stand in different rooms. A USB cable needs 10 meters. So you still need some kind of Wi-Fi adapter connected to an old ancient printer.

How to make your printer wireless with Wi-Fi? Connect it with a wire to the router! Genital.

Use the Ethernet-Wi-Fi adapter.

If you have a printer with the Ethernet port and you do not want to use the Powerline adapter method, you can use the Ethernet-Wi-Fi adapter. The only catch here is that you first need to connect the printer to the PC to make sure that all network settings are correct before using the Wi-Fi adapter.

If none of the above solutions does not work or is simply suitable for you, there is a relatively affordable and reliable solution. You can just buy a dedicated print server. This is a small box with a USB connection on the one hand and the Ethernet port on the other. Inside is a small dedicated computer, the only task of which is to accept the tasks of the network print and then transfer them to the printer.

Although this means that your printer should be connected to the router via Ethernet, this instantly allows all network devices to jointly use this printer. The allocated print server consumes very little electricity and is always available.

There are also devices for selected wireless print servers, but they usually cost a little more than devices designed only for Ethernet. So you have to decide if the extra few dollars are worth.

How to make a printer wireless

The printer has become an indispensable device for both all offices and for most houses. Business people, schoolchildren, students and not only. Often the printer is simply connected to the PC using a cable, but this is not very convenient.

regular, printer, make, wi-fi

In offices, wireless printers are most widespread, since they are usually installed in general access for employees, so as not to purchase by the device for each (which is unprofitable, and not necessary).

So that every employee can, when he needs to send a document for printing, the printed device must be connected to PC. In the case of a wired connection, you have to constantly switch the printer between computers. When it is connected to a wireless network, all employees have access to it.

Of course, there is no such need for printing at home, but making the printer wireless will be useful in the following cases:

  • Noise. In small apartments, computers are often installed in bedrooms, especially children’s, which makes a printout of documents, for example, uncomfortable in the morning, since the printer makes noise during operation. A wireless connection allows you to install a printed device away, for example, in the hallway, where it will not interfere with anyone.
  • Wires. The more equipment appears at home, the more wires become in it. This is especially true for computers in which most components are connected to the wires block. And, accordingly, the more different cables, the more often they get confused, collect dust, etc. P.
  • Included PC. Wireless printers have built.in memory, so during printing on them, there is no need to keep PC on.
  • A few computers. As in the case of offices, in the presence of a house of several PC, a wireless printer allows you to calmly send documents without thinking about connecting.

IMPORTANT! The wired connection is also not advised if there are young children and pets in the house.

You can initially buy a wireless printing device, however, it is quite possible to make it from the usual.

How to make a regular Wi-Fi printer

In order to make a wireless local printer, first of all, you will need to equip it with a network intese. For the house, Wi-Fi is the most successful and simple solution. A huge number of so-called print servers are available on sale, with which a local printer becomes a network device.

The print server, however, acts not only as a device-transformer. It also adds a number of useful functions. The most popular include:

IMPORTANT! When choosing a print server, you should first turn to the amount of memory and data transfer speed. This is especially true if you plan to print large volumes of documents.

After purchasing a print server, it is worth first to get acquainted with its instructions. Various devices require their connection algorithm, also applies to their settings. Therefore, it is recommended to install and configure in accordance with the instructions of the device you bought, even if you used to have some kind of print server.

Total access to the printer

The easiest but no less effective way to solve the problem of how to make the printer network is to provide general access to a local computer. The algorithm is quite simple and even a schoolboy will master it.

  • By going into the properties of the printer installed in the Windows system, go to the “Access” bookmark and install the flags opposite the “General Access” fields and “Task drawing”.
  • By going into the properties of the system and moving on to the “Computer Name” bookmark that the “Working Group” is spelled out the same for all computers in the local network.
  • To make the printer network, Windows 7, 8 and 10 require additional settings of the network adapter. To do this, go to the “Networks Management Center” and change the additional parameters of the total access, setting the flags opposite all the fields starting with the word “turn on”.
  • Encryption is recommended to install 128-bit, and turn off the password protection.

Remote connection to an affordable printer

Having completed the first step in solving the issue of how to make the printer with network, you can start connecting a public device to other computers in the local network. There are only two options. they are different, but their result is the same. The first option is described above, because for the settings there is no particular difference what type of connection is used. the main thing is to know the IP address of the printer.

But the second method is suitable for people who are looking for easy ways. In fact, this is an instruction on how to make a network printer local. By moving to “network connections” that can be found in the control panel, you must select the “network environment” item. The alternative may be the launch of the “network environment” label from the desktop if the user has not removed it earlier with unnecessary. Here you need to display the computers that enter the working group. for this there is an appropriate button. Finding the right computer, go into it. In the list of available resources, the printer will be displayed. If you make a double.click by the name of the device and agree to all warnings, the printer easily connects.

How to connect a regular printer to a laptop via Wi-Fi?

Unfortunately, the developers of budget models rarely provide devices with a built-in Wi-Fi transmitter, therefore, the following methods of the given connection to the computer are used for ordinary printers:

Installation of additional network equipment-a print server, with which you can make a printer with a wireless local network unit;

The printer cable connection to the computer, which has access to the local Wi-Fi network: thus, any Wi-Fi device can contact the printer through the “intermediary”.

The advantage of this method lies in its efficiency: you do not have to spend money on additional expensive equipment. However, you can not do without a second computer, which is obliged to constantly work throughout the “communication session”.

To configure the printer connection through Wi-Fi in this way you need:

regular, printer, make, wi-fi
  • Connect the printer to an “intermediate” computer using a cable and install the required software (driver);
  • Go to the “Start”- “control panel”. “Printers and faxes” and open this printer for overall access;
  • Connect the printer to the laptop via Wi-Fi. To do this, go to the “service” printer computer on the local network (see. link at the end of the article), find the label open to the overall access of the printer, rightly click on it with the right mouse button and select the menu item “Use by default”.

Now at the command “Print” your laptop will automatically print on a Wi-Fi printer.

Using a Wi-Fi router with a built-in print server function and the presence of a USB-shate for external network devices on the case. To configure such a connection follows:

  • connect the printer to the router using a cable;
  • correctly configure the printer connection to the router;
  • Connect to the printer from the laptop via local Wi-Fi network (see. link at the end of the article).

However, such difficulties are justified only when the Wi-Fi setting is required on the good old printer, which has long been “participated” and almost native. In other cases, it is more logical to immediately purchase a modern Wi-Fi printer with a built-in network module and not suffer with the setting up of all kinds of additional equipment.

Of the most popular vendors tested here, one can note: HP, Canon, Epson, Konica, Panasonic, Samsung, Xerox, Brother and Minolta: such a printer can be easily connected to a laptop, router, tablet, etc.D.

At the same time, depending on the specific situation, you can create a wireless connection with the laptop in different ways: we will consider the main options for connecting the printer in Wi-Fi in more detail.

How to connect a Wi-Fi printer to a computer and laptop?

From the “classic” ways to connect the printer Wi-Fi can be noted:

Using the internal local network between the printer and the laptop.

This is possible when the computer connected to a wireless network is able to independently distribute Wi-Fi.

Here, to configure the connection of the printer’s Wi-Fi, you follow:

Printer connection via Wi-Fi router:

For this first Turn on the function WPS On your router, And then using the WPS (QSS) button, connect your printer to the Wi-Fi home network.

To print through Wi-Fi, it is enough to connect from your laptop to the installed print on the local network (see. link at the end of the article).

To do this, in the printer control panel, start “Search for available networks” and select your router network by SSID. Here you need to indicate the password on Wi-Fi and confirm the connection to the network, after which the corresponding Wi-Fi indicator should light up on the printer.

Run the driver installation and select a Wi-Fi connection with manual settings of the parameters, at the end of which the printer will be available for wireless connection via a local network.

If the question is how to connect to another computer (or Wi-Fi printer) on a local network causes difficulty, we also recommend that you familiarize yourself with the articles how to go to a local computer and how to turn on Wi-Fi on a laptop