Honor 10 Lite Screen problems: how to fix it

Honor 10 Lite mid-range terminal that saw the light of day in November 2018. The terminal still maintains the specifications at 6.21-inch FullHD screen with 1,080 x 2,340 pixels, dual rear camera and 24-megapixel selfie sensor. It also has a Kirin 710 chip and options up to 6GB of RAM. However, as usual, this terminal is not without problems.

It is almost impossible to find a cell phone that is not affected by any other problem. Fortunately, specialized forums and portals such as MovilZona try to find solutions to these problems. In the case of the Honor 10 Lite, some problems have been reported with its screen, which can be solved in most cases.

Paper towel

If the device gets wet from liquid, it’s best to dry it off with a cotton towel. Paper tends to absorb water, swell and break up into particles that get into the holes in the case and penetrate. The first time you start your smartphone system after an incident, the paper towel particles will cause the contacts to short or burn out.

The touch screen does not work on Android

In this article I will tell you what to do if your Android phone’s sensor (touchscreen) does not work and how you can pull/copy data or contacts from it.

This article is suitable for all brands, producing phones on Android 11/10/9/8: Samsung, HTC, Lenovo, LG, Sony, ZTE, Huawei, Meizu, Fly, Alcatel, Xiaomi, Nokia and others. We are not responsible for your actions.

How to Fix Huawei Honor Phones Stuck On Boot Start Screen Problem

Warning! You can ask your question to an expert at the end of this article.

What to do if your smartphone does not respond to touch

Moving on to more serious methods of solving the black screen on your mobile. Not all smartphones have the ability to quickly and easily remove the back cover. You may need to unscrew a few screws that hold it.

  • When the cover is removed, remove the battery from the cell in the body of the smartphone;
  • Next you will need to unscrew a few more screws that hold the plastic partition between the back cover and the main board of the smartphone. Carefully remove the partition;
See also  How to unlock Samsung Prime phone

Oxidation of the contacts of the cell phone board can only occur due to ingress of moisture. If you managed to revive your smartphone. its parts can be assembled. But if you find soot on any part of the board, the device should be taken to the repair shop. On your own you are unlikely to cope without the necessary knowledge and tools.

The sensor on the phone does not work what to do

Modern touch screen cell phones. a recognized attribute of our lives. Their rich functionality and extensive features allow you to use them for a variety of tasks that are not limited to the classic phone calls. The richness of the options for using these devices leads to their gradual failure, and one of the common breakdowns is the sensor dysfunction on the phone, when the latter simply stops responding to presses (or responds extremely poorly). In this material I will tell you what the causes of such dysfunction are, and what to do if the touch screen on your smartphone does not work.

honor, phone, screen, does, work

Other causes of sensor malfunction

In the case of inoperability of half of the touch screen, the cause of the failure may be associated with a partial detachment of the touchscreen contacts and in accordance with the improper transmission of the signal. In this case you need to carefully disassemble the phone and assess the touch screen contacts. Such a procedure should be performed with special care, because at the heart of the device there are many small parts.

honor, phone, screen, does, work

The workability of the touchscreen can be lost in case of the failure of some parts. Subcooling or overheating can play an important role. The latter faults are solved by restoring the normal temperature regime. Sensor repair is most often necessary in cases where dirt or moisture gets inside the phone. After cleaning the contacts, you should carefully assemble the phone and check the functionality of the screen.

When performing independent repair of the touch screen, you will need to strictly follow a certain algorithm of actions. You can’t do without using special equipment and high quality materials. In particular, you will need to buy a variety of. including.

See also  How to detach the Apple iwatch from your iPhone

Despite the fact that the operating system. As the shell is carefully tested, they are present hidden bugs that appear in rare circumstances.

The solution to the struggle in this case will be simple. If the reason for the lack of response of the sensor on the finger was a software failure, rebooting will solve the problem.

The smartphone screen does not respond to any touch what to do?

If the touch screen has no physical damage, but suddenly stops responding to your touch, it could be caused by software problems. Here are the basic and most effective ways to fix the problem:

Before getting into any other troubleshooting procedures, restart your phone or tablet to fix any software bugs that may be preventing your device from working.

Restarting any Android device with a touchscreen is done as follows:

In many cases, the phone will respond normally to touch after rebooting.

honor, phone, screen, does, work

Sometimes a faulty memory card or SIM card is to blame. Hence:

Damaged or extraneous apps can also cause a problem with your phone or tablet’s touchscreen.

In safe mode, all downloadable third-party applications will be disabled, i.e.е. Only the standard applications needed to run the operating system and maintain minimum functionality will load. Therefore, if the display works well in safe mode, you should uninstall some applications, especially those that were installed very recently, before the touch screen problem.

  • Turn off your Android device.
  • Next, long press the power button to reboot your device.
  • When you see the phone brand logo, release the power button, press and hold the volume down button.
  • Release the volume down button when your device boots up with the safe mode indicator in the lower left corner.

Warning! If your phone‘s sensor doesn’t respond at all, lags, slows, or responds incorrectly, you can also try this method.

When you see the message that the device has rebooted in Safe Mode, press OK. Safe Mode is on. If there are no problems, start uninstalling third-party applications, periodically restarting the device and checking the operation of the smartphone in normal mode.

If the touchscreen is completely unresponsive, you may need to reset it to factory defaults.

This procedure will delete all the data on your device, including downloaded apps, photos, messages, contacts, etc.д. WITHOUT THE POSSIBILITY OF RECOVERY. So use this method as a last resort. Back up your Google account in advance.

The steps to enter recovery mode are different for many Android models. In other articles we have mentioned how to do this, so let’s not repeat it and proceed with the next method.

See also  How to make photo collage on the phone. PIP Camera: Picture in Picture and Photports

Google Play Store has apps that can calibrate your phone/tablet’s touch screen, which will improve its accuracy and responsiveness to touch. These apps are especially useful if your smartphone’s sensor reacts too slowly to quick touches or does not accurately detect the pressure point.

Type touchscreen calibration in the Play Market search bar, and the system will give you quite a few results.

Read reviews carefully before downloading any of the apps, give preference to trusted authors.

Huawei phones: how to fix screen problems

Our cell phone screen is everything. If something goes wrong, the entire experience can be affected. If you do not turn it on, it gets worse because there is absolutely nothing we can do. Any cell phone is prone to problems with its screen including Huawei. So we will look at solutions that we ourselves can put in place to make our screen work properly.

In many cases, screen failures usually indicate a hardware failure. In this case, we need the help of the technical service to solve the problem. However, there are a few diagnostic tests and solutions that we can perform before thinking about the main causes.

Recommendations to help avoid a repeat of the situation

There are some important recommendations to follow in order to reduce the likelihood of such a failure:

  • A system upgrade requires a mandatory connection to the internet. Make sure you have enough money for a mobile Internet connection. Or use Wi-Fi.
  • The procedure itself is quite power-consuming, so the battery of the cell phone should be at least a third of the full.
  • You should not perform the update with third-party programs.
  • Applications used by the owner of the cell phone can conflict with this procedure. If they themselves have not updated to the current version. So it is worth periodically checking this point.

Well and one more important recommendation. in order to guarantee the preservation of all your personal data, it is recommended before running the update, always make a copy of them. For this purpose, the developers have specially created a program Hisuite.

BYRGPUB.COM 2022