MD (MicroDigital)
- IP address: 192.168.0.13 / 10.20.30.40 / DHCP
- Login: root
- Password: root
- Find out IP address: MGuardTools / IP Installer Pro
- Reset Password: Factory Default Button
Target
- IP address: 192.168.0.13
- Login: admin
- Password: 123456 / no password
- Find out IP address: IP Search Tool
Vivotek
- IP address: DHCP
- Login: root
- Password: blank
- Find out the IP address: VIVOTEK’s Installation Wizard 2
- Reset password: Reset button
Arecont Vision
- IP address: DHCP
- Login: admin
- Password: blank
- Find out IP address: AV IP Utility
- Reset password: Reset button
- IP address: 192.168.0.90 / DHCP
- Login: root
- Password: pass / set upon activation
- Find out IP address: AXIS IP Utility
- Reset Password: Control Button
Activecam
- IP address: 192.168.1.188
- Login: admin
- Password: admin
- Find out the IP address: IPC DeviceManager
- Reset password: Reset button
Honeywell
- IP address: DHCP
- Login: admin / administrator
- Password: 1234 / set upon activation
- Find IP Address: Honeywell Device Search / Honeywell Config Tool
- Reset Password: Reset / Honeywell Config Tool Button
- IP address: 192.168.1.200
- Login: admin
- Password: admin / 12345
- Find out IP address: IP Search Tool
- Reset password: Reset button
Huviron
- IP address: 192.168.1.30
- Login: admin / root
- Password: admin / root
- Reset password: Reset button
- Login and password from the IMOU account (IMOU Life application): set during registration in the application. Login. your email or phone number, password. what you specified during registration (not to be confused with a one-time code to confirm your number or email). If you forgot your password, you can restore it by pressing the button in the application.
- Verification code: indicated on the camera stickers / blank
- Web interface is replaced by configuration via Dahua ConfigTool
- Login and password via ConfigTool: admin. security code (look at the sticker for the security code, if not, then in the IMOU Life application. the device password)
- Security code: indicated on the camera stickers / look in IMOU Life. device password
- IP address: DHCP
- Login: admin
- Password: set upon activation
- Find out IP address: Dahua ConfigTool
- Reset settings: Reset button
- Technical support: 8-800-350-60-08
- The camera cannot be linked to a new account if it is already linked. First, you need to remove it from your current account.
- The camera can be shared with another account (send an invitation)
- IMOU cameras have their own web interface
ST (Space Technology)
- IP address: 192.168.0.100 / DHCP
- Login: admin
- Password: 12345 / admin / empty / set upon activation
- Find out IP address: Camera search utility ST v1.5 / Dahua ConfigTool
- Reset password: instructions
Hiseeu
SADP program for changing the settings of Hikvision IP cameras, manual, download. SADP program for changing the settings of Hikvision IP cameras, manual, download
So you have a Hikvision IP camera. You have done all the installation work and now you need to start your surveillance system.
We start by entering the IP address specified in the documentation for the IP camera. By default, the following access data is applied to all Hikvision IP cameras:
- IP address. 192.0.0.64
- Login. admin
- Password. 12345
However, not everything is so simple, by entering the address used by Hikvision by default, you will receive a nice message “The web page is not available”.
The point is that your switch operates with a different address range. But in no case should they be changed. Changes are made in a completely different place, namely on the computer. We go to the Windows Network and Sharing Center and select the item. Local Area Connection.
Selecting the information button.
On the tab that opens, look at the default gateway.
From this window, we see that the computer is working on the network. 192.168.0 IP addresses, Hikvision cameras, as we remember. 192.0.0.64. Now you need to change the default IP address to 192.168.0.64.
This requires a program from Hikvision called SADP. You can download from the official website of Hikvision by the link.
After starting, the program will find the Hikvision IP cameras available in the network. The figure shows how this happens.
And now, in the right column, you should specify the required IP address and Gateway, and also, before clicking the Save button, enter the password. 12345. This password can be subsequently changed in the web interface of the IP camera.
Now after entering the new IP address, the image from the IP camera will appear.
Thus, IP cameras are connected to the computer.
It is even easier to connect an IP camera to a DVR. Below we provide. How to do it.
Below we give more detailed instructions for working with the SADP program.
- Select device in SADP (you can also select multIPle devices to activate simultaneously and give them the same password),
- Enter a new password for the device and confirm with “OK”.
View of the SADP program window in which the area for entering a new password and activating the device is highlighted in red.
The program automatically checks and displays the strength of the entered password. A strong password must contain from 8 to 16 characters, among which there must be at least three types of the following characters: numbers, lowercase letters, uppercase letters, special characters.
- Select from the list the device whose parameters in the network will be changed (the list of network parameters available for changing is displayed in the right part of the program). If DHCP function is enabled, only some parameters can be changed, such as SDK Port (default 8000) and HTTP Port (default 80). The rest of the network parameters (for example, IP address, mask, gateway) are assigned automatically via a DHCP server. If IPv6 addressing is used, it must be supported by the device. As in the case of the DHCP function, which must be supported by both the device and the router on the network to which they are connected.
- If DHCP does not work, it is possible to manually change all available network parameters (for example, IP address, mask, gateway, etc.),
- For all settings to be saved, you must enter the password to access the camera and confirm it with the Save button.
- Click on one device and drag with the mouse to highlight sequential parameters, which will be available for editing in the right part of the settings window, you must enter the starting IP addresses (for example, if three devices are selected and the starting address is 192.168.1.64, the devices will be sequentially displayed address 192.168.1.65, 192.168.1.66)
- You can also select the “Enable DHCP in Batch” function to automatically assign network parameters such as IP address, mask, gateway to selected devices.,
- To save all settings, you must enter the access password for the devices and confirm it with the “Save” button.
SADP window view. An area is highlighted in red, in which, with active options, it is possible to assign network parameters to a group of devices.
4. Password recovery by default. In case of problems with access to the camera or DVR caused by the wrong password, it is possible to reset it to factory settings. Hikvision provides two ways to recover the default password depending on the firmware version (with firmware version higher than V3.3.0 in the DVR. And higher than V5.3.0 in cameras, the second method is provided). First method: Select in the main window of the SADP program the device whose password we want to restore to factory settings. If the password recovery window looks like the following figure, follow these steps:
- Select device,
- Copy the date and time from the SADP program from the Start Time tab and from the Device Serial NO tab.
- Send information to technical support deltavideo.Info@gmail.com
- Within 1-2 business days, you will be sent an unlock code,
- Select the device we want to unlock,
- The received security code must be inserted into the “Security Code” window and confirmed with the OK button,
- The device access password will be reset to factory settings (login: admin, password: 12345)
- Select device,
- In the tab next to the Export button, you should specify the location where the file will be saved, allowing you to recover the password (you should select the folder in which the exported file will be located with the name DeviceKey.Xml)
- Click the “Export” button
- Then the file must be sent to the technical support deltavideo.Info@gmail.com. A password unlock file will be sent within 1-2 business days,
- Select the device we want to unlock
- To unlock the device, you need to specify the password unlock file next to the import button, and then click the Import button,
- The password for the device will be reset to factory settings.
In the SADP window. The area of export and import of files is highlighted in red, allowing you to reset the password to factory settings. The password for the administrator account will be restored to the factory settings. In the case of the first method described above, the default is 12345, in the case of the second method, you need to set a new password when activating the camera or DVR (no default password). When you log in for the first time, you must set or change a password to prevent unauthorized access by third parties. We strongly recommend that you use a strong password for increased security. A strong password must contain from 8 to 16 characters, among which there must be at least three types of the following characters: numbers, lowercase letters, uppercase letters, special characters.
5. Resetting and assigning a new administrator password.
It is possible to create a new administrator password if it is lost. To do this, in the “Reset password” tab:
Instructions for resetting password on Hikvision devices (Hiwatch)
Reset password on Hikvision devices (Hiwatch)
Average processing time for password reset requests from 30 minutes to an hour, on weekdays during business hours (UTC3)
To get started, install the latest version of SADP software using the link Run SADP as administrator
After opening SADP, the program will scan your local network and display a list of found devices.
Then you need to check the box in front of the device, the password of which should be reset and click on the link “Forgot Password”
After clicking on the “Forgot Password” link, a window will open, the appearance of which depends on the firmware version installed in the device
For new firmware (5.3 for cameras, 3.0.10 for registrars)
You need to export.XML file (for each device its own file) click on the Export button
Next, select the file export directory. The illustration below shows the Desktop as an example.
A file with the extension.XML and the name in the form of the full serial number of the device will appear in the specified directory.
This file must be sent to the mail. This email address is being protected from spambots. You need JavaScrIPt enabled to view it. And follow further instructions from specialists
DO NOT REBOOT THE DEVICE AFTER sending the DATA The reset file and the reset code are valid only for two days; the settings and the device archive will NOT change
In response, you will receive a letter with a file with the extension.XML, this file must be substituted in this window. Then you come up with a new password and confirm it.
Method number 2
For older firmwares (5.2 for cameras, 3.0.9 for DVRs and earlier)
If an old firmware version is installed, the system will ask you to enter the code to reset the password to the factory (12345) as in the illustration below.
To receive the code, you need to send an email. This email address is being protected from spambots. You need JavaScrIPt enabled to view it. Or This email address is being protected from spambots. You need JavaScrIPt enabled to view it. Device information file:
Check the box next to the required devices and press the Export button, send the resulting spreadsheet file (.XLS) to us by email with the subject “Password reset”
You can also send information in this form:
Full serial number of the device (For example: DS-72xxABCD-XY / SN123456789ABCD123456789ABCD) (The serial number from the sticker on the device will NOT work, only the one indicated in the SADP)
The value of the “Start time” field (For example: 2014-05-22 1:11 PM), which can be found on the right side of the table
SADP password reset problems
When using SADP to reset the device, it is highly recommended to connect the device directly to the PC.
Error: Get key error
When exporting the key file, SADP says: reset password failed
When exporting a key XML file, SADP displays a Get key error message
PC and device are connected through more than one switch, which DO NOT support multi-cast function
The PC and the device are connected through a router, and the NAT function is enabled on the router and on the device
PC IP address changed while opening SADP software
Incorrect device firmware
When the device and PC are connected through more than one switch, please make sure the routers support the multi-cast function, as it is necessary for the device activation and reset process.
When the PC and the device are connected through a router, try to disable the NAT function in the router and the device. When NAT is activated, the device does NOT receive multi-cast messages.
When the PC and device are directly connected and the IP address of the PC has changed while SADP was open, just restart SADP
Try to flash the device, for example Using TFTP
Error: Reset password failed
When exporting a key file, SADP reports: reset password failed Possible reasons
You may be trying to use an already used or old xml key file.
Perhaps you have generated a new xml key for sending, in this case, the old Sbrs files are no longer suitable.
There may be problems with the file sent to you
PC address changed while SADP was open
Make sure you are using the current file = unlock key
Make sure you have not rebooted the device and have not formed a new file
Key to send.
Invite a new key file to technical support
When the PC and device are directly connected and the IP address of the PC has changed while SADP is open, just restart SADP
SADP does not see the device
If SADP DOES NOT show Hikvison devices on LAN.
First, try disabling all antiviruses and firewalls, if this did not help, then one of the reasons may be an error in the Winpcap network scanner.
Try to reinstall the scanner itself, downloaded the latest version from the link http://www.Winpcap.org/. After that, restart your computer and try to open SADP again.
If SADP does NOT display only some devices or a single device. The problem may be related to Incorrect loading of the device itself or damage to the eGoProgram.
In this case, check the integrity of the cable, does the camera react to the closing of the light sensor to turn on the IR illumination? If the camera responds, but the camera is still not visible in SADP, try reflashing the camera using a TFTP server.
Hiwatch IP camera activation password
You must use a modern version of the SADP program
Cameras with V5.3.0 version, DVR / NVR with V3.3.0 version no longer have a default password. Connect devices for the first time, users need to activate the device. Be sure to set a password. Password secrecy level must be higher than “12345” (for password rules and levels, see the end of the article).
Activation methods
Using a web browser:
Devices such as cameras (from V5.3.0) and like NVRs and DVRs (from V3.3.0) can be activated via the InternetExplorer (IE) web browser. Before logging into the device, users must set a login password and click [OK] to continue.
To activate new equIPment, you can use the SADP program version V2.2.3.5 (SADP) or higher.
Follow these steps for a successful activate:
-select the device you want to activate in the “Online Devices” list
– enter a New Password in the “Device Activation area”;
– confirm new password;
– click OK to apply.
The status in the “Security” column should change to “active”
Activation of recorders with a version (from V3.3.0) with a connected monitor directly from it:
In addition, you can activate IP cameras using the registrar:
For what it is, press the “one-touch activation” button in the menu for adding IP cameras.
And enter the password in the same way as when activating the registrar itself or use the administrator password installed on the registrar.
Password rules.
There are four kinds of characters that can be used for a password: numbers / uppercase letters / uppercase letters / special characters.
Password levels.
Level 0 (Risky): password length is less than eight characters; one kind of symbols; the password is the same as the username; password. (Example: 12345, abcdefgh)
Level 1 (Weak): The password contains two kinds of characters. The combination of the number of lowercase letters, the number of uppercase letters, the password cannot be shorter than eight characters. (Example: 12345abc, 12345ABC)
Level 2 (Medium): The password contains two types of characters from any of the four groups of characters, the password cannot be shorter than eight characters. (Example: 1234567. Abcdefg /, GFEDCBA), ABCDEFGh,)
Level 3 (Strong): The password contains more than two kinds of characters, the password cannot be shorter than eight characters. (Example: 1234abc)
NOTE: the password level must be higher than 0. Use of the 0 level password is prohibited.
If you enter incorrect data to enter the device, access blocking may be triggered.
Device lock duration:
Remote login: 30 minutes (client’s IP will be blocked),
Local login: 1 minute (login will be blocked)
Users who have already logged in and will not be blocked;
2. The administrator account can open access to the SDK
IP cameras: crimping scheme
List of tested HDD and SD cards. IVMS 4200
Instructions for versions 3.1.1.13 and higher
Instructions The following was done for versions 2.3.1.3 and higher
IP cameras: audio input and output
Re-flashing registrars everything connected with it
We recommend updating via the IVMS-4200 client software or the BatchConfigTool utility
Selection of brackets and mounting boxes
Hikvision Camera Compatibility Chart with Accessories you can download here
You can download the compatibility table of HiWatch cameras with accessories here
You can download the table of intercoms and outdoor panels compatibility with accessories here
You can get acquainted with passports for accessories at this link
Flashing cameras and everything connected with it
You can update the firmware through the web interface of the device, like a regular router, or through the client software IVMS-4200.
The update must be done sequentially. 5.1.X. 5.2.X. 5.3.X. 5.4.X
From firmware 5.3.X to 5.2.X and from 5.4.X to 5.3.X it will NOT be possible to roll back.
You can rollback the firmware (for example) from 5.3.8 to 5.3.3 using TFTP, from 5.3.8 to 5.2.0 you CANNOT rollback!