Full HD IP camera for wireless video surveillance via WI-FI Hiseeu FH1C

An IP camera from the Hiseeu brand, model FH1C with a WI-FI module, allows you to independently and without calling specialists install a wireless video surveillance system in your room. This IP HD Camera is connected to the mains. In the socket, and to your WI-FI network, there is a need for wires. With the help of the software (included), which can be installed both on a PC under Windows, or on a smartphone, tablet under Android or IOS, you can easily remotely (from anywhere in the world) watch what is happening around the camera in HD quality. Also, the camera has a built-in motor, which allows you to control the lens remotely (rotate), thereby providing maximum view of the room. Also, the WI-FI camera has a built-in microphone and speaker, which makes it possible to record and listen to sound in the vicinity, as well as transmit audio messages to the camera, conduct a dialogue, talk, which makes it possible to use the IP camera as a baby monitor. Video can be recorded on an SD card, which can be placed in a camera slot, as well as recorded on special Cloud services, or in the memory of your device (phone, tablet, computer).

This type of wireless IP cameras is perfect for home video surveillance for offices, cafes, restaurants, warehouses, etc.

Main features and functions of Hiseeu IP camera:

Hiseeu Wireless IP Camera Specifications:

Model: FH1C

Network: wi-fi / 802.11 / b / g, LAN RJ45

3.6mm lens, Sony CMOS sensor, Full HD 1080p

Viewing angle: 90 degrees (not very mobile)

Dimensions: 120mm x 90mm x 90mm;

Audio: built-in sensitive microphone, speaker;

Motion sensor: yes;

IR sensors for night shooting: 11 pcs;

Video compression format: mpeg4, mjpeg, H.264;

Min LUX: 0.4LUX / F2.0

Operating systems support: Android, IOS, Windows;

Power supply: 5V 2A.

Equipment:

Hiseeu FH1C HD 1080p WIFI IP Indoor Security Camera

Descriptions FH1C

Hiseeu FH1C 1080p Wireless IP Camera Are you doing well at home? Is my pet good at home? Did I leave the garage open? Children from school home? Miss your loved one? Solve your inner doubts and problems with the Hiseeu FH1C IP Camera, which has a 2.0 MP / 75 degree camera angle and motion detection alarm function. And stay connected to what you love and never miss a moment wherever you are!

Key features:.1080p HD camera: 1 / 2.8-inch CMOS sensor, 1.30 frames per second adjustable frame rate; 75 degree viewing angle, 3.6mm lens. Two-way audio: The camera contains a built-in speaker and microphone. Whether on your computer or smartphone everything you say or hear will come through clearly and instantly There is 2.3 s delay-IR night vision: with 11 pcs / IR LED illumination, support for night vision, IR distance 3.5M. Allow you to get crystal clear images even in total darkness. Plug and play: no need for DDNS, there is need for port forwarding setup. support up to 64GB TF card for recording and playback, 24 hours recording for free. Pan and tilt: Horizontal: 355 degrees ; vertical 120 degrees. AP hotspot: support monitor on smartphones or tablet PCs, AP router, no internet. Please download yoosee App from Android market or AppStore. Supports Android 3.0 or above, iOS 7.0 or above. The device is compatible with onvif

Specifications:. Brand: Hiseeu. Model: FH1C. Material: ABS. Signal to noise ratio: not less than 38db Pixels 2.0 MP. Resolution 1920 x 1080p. Supports iPhone / iPad / Android / PC. Frame rate: 1.30 frames per second. Lens: 3.6 mm, Viewing angle 75 degrees. Sensor: 1 / 2.8 ” CMOS sensor. Minimum illumination: 1.5 Lux (daytime), 0.1 Lux (night). Video format: AV format

FAQ: Q: no night vision? Answer: 1. Check whether the IR is on or not. 2. Check IR LED or not. 3. Reset the camera to factory settings. 4. Try to update the device to the latest firmware. Q: What should we do if the image from the camera is blurred? Answer: 1. Enter the video interface, adjust the image quality in HD mode. 2.Clean the camera lens with a cotton swab.

Ip camera

Nowadays, IP video surveillance is becoming more and more popular. IP cameras are installed for houses, apartments, summer cottages, so many ask themselves the question: how to properly connect an ip camera with remote access? Diagrams for connecting ip cameras will help to answer this question. To connect cameras in advance, you need to: sketch a connection diagram; think over the capacity of the equipment and the number of digital video cameras used, otherwise equipment overload may occur, which [.]

There are situations when you need to connect a CCTV camera over a long distance. The transmission of a digital signal for IP cameras, as a rule, occurs over an unshielded twisted pair cable. It consists of one or more pairs of colored copper conductors. If we talk about the wire, then it is standard, network fifth category UTP, popularly “twisted pair”. The twisted pair is connected to the network interface with the rj45 connector. One end connects [.]

To ensure security on site, it is not enough to install cameras. This is just the technical side of the issue. It is equally important to choose a suitable program for video surveillance ip-cameras. : A program for recording video from an ip-camera; iSPY. pros and cons; Xeoma. pros and cons; ContaCam. pros and cons; IP Camera Viewer. pros and cons; WebCam Monitor. pros and cons; Axxon Next. [.]

The safety of your own home depends on the degree of responsibility when choosing equipment, the vocation to be responsible for it. Often, IP cameras become one of the main means of ensuring it, and the level of protection depends on the correct choice of them. You should choose cameras carefully, relying not only on and functionality, but also on the features of providing a package of services, the presence or absence of a paid subscription. Tasks Solved Home ip-cameras capable of transmitting [.]

Network switches, which are also called switches, are used in IP video surveillance, ip cameras are connected to them. They give connections to local network modules. Switch. it is a network device designed to connect, combining multiple hosts into a network. Poe switch. it is a device that allows the transmission of electrical network signals over a twisted pair, simultaneously with the data of the network interface. Thus, this technology allows powering IP cameras [.]

When organizing a security system for an apartment, a country house, an office, it is not always convenient to use wired connections. Sometimes you need to configure an IP camera via WI-FI, which will allow you to receive an image from it online directly on the screen of your mobile device. The finished video, compressed to a convenient size, is instantly transmitted over network protocols. Further, with the help of Special Programs, it can not only be viewed, but also processed. Setting via [.]

Modern CCTV cameras DO NOT require deep technical knowledge to connect to a computer or mobile device and configure the required parameters. Any user can do it on their own. To connect and configure, you will need to study the instructions and take care of the availability of special software. The devices can be connected to a computer using a wired connection and an IP connection. How to connect hiseeu IP camera? IP CCTV cameras from Chinese [.]

With the development of the field of video surveillance, IP cameras have become widely used not only in indoor areas, but also to protect external spaces. streets, courtyards, approaches to buildings, and so on. As you know, the impact of a Thunderstorm or lightning can adversely affect the operation of any technological device, and the DVR in this case is NOT an exception. For this reason, it is necessary to use Special devices that will help to provide [.]

Do you want to protect your home? There can be many reasons for installing security cameras. However, buying an IP camera can cost you a lot. Fortunately, if you have an old smartphone, you can easily convert it to an IP camera from your android Android smartphone. it is a platform on which there are a number of applications that will turn your phone’s camera into an IP camera. They will allow [.]

Hiseeu Home Security 1080P 3MP WIFI IP Camera Audio Recording SD Memory Card P2P HD CCTV Wireless Surveillance Camera Baby Monitor-in CCTV Cameras from Security & Protection. Details about Hiseeu Home Security 1080P 3MP WIFI IP Camera Audio Recording SD Memory Card P2P HD CCTV Wireless CCTV Camera Baby Monitor-in CCTV Cameras from Security & Protection

• Pantilt: Yes
• Package size: 160mm x 150mm x 150 (LWH)
• Display: HD / SD / LD
• Storage card slot: Micro sd card 8/16/32 / 64Gb
• Technology: Horizontal: 355 ° vertical: 110 °
• IR-leds: Yes
• Memory cards: 32G TF card
• Power: Normal
• Video compression format: H.264
• Network interface: Wi-Fi / 802.11 / b / g
• Alarm triggered: Local alarm
• Alarm triggered: Email
• Storage: 64 GB
• Supported Mobile Systems: iOS
• Supported Mobile Systems: Android
• Dimensions (L x W x D) (mm): 120mm x 92mm x 92MM (LWH)
• Technology: Infrared Thermometer
• Proprietary sensor: Sony
• Megapixels: 2MP
• Model Number: FH-1C
• Power supply v: 5v2A
• Sensor: CMOS Array
• Minimum Illumination (Lux): 0.4LUX / F2.0
• White color
• Individual production Yes
• Power consumption W): 5W
• IR Distance (m): 10M
• Hanging bracket Ceiling
• Installation: Normal
• Lens (mm): 3.6mm
• High Definition: 1080P (Full-HD)
• Operating system support: Windows XP
• Supports Windows 98 operating systems
• Operating system support: Windows 7
• Operating system support: Windows 8
• Connectivity: IP / Wired Network
• Type: IP Camera
• Style: Dome Camera
• Brand: hiseeu

Key Features:

HD real 1.0 / 2.0 megalpixel resolution View simultaneously for 10 remote control on most devices

Easy to establish a Wi-Fi connection (WI-FI is not supported by 5G)

Support AP mode (network cannot be used) Clear two-way audio and conversation

Motion detection: send email, record video

Transparent Night Vision

Pan 355 degrees, tilt 110 degrees

Support SD card recording (60 days max) and easy to play

3 = meter power adapter cable

Online Demo:

Download the app «Yoosee” From the APP store. Intall “Yoosee” APP. Register an application zapis.- vhoda.- Demo Login ID (7772165) and passwor D (123), then you will see the real picture of the camera.

External composition to Europe, Russia and France

Pan and Tilt Control

Remotely control the pan / tilt camera, view any angle you want

Place it anywhere, easy setup

Installation Takes Minutes, Table Support, Walls, Ceiling Installation

Plug and play. Just plug it in and then install it through the moible APP

Two-way audio

Built-in microphone and speaker, bring you real-time two-way audio. You can use it for conversation

With your family remotely anytime anywhere

Access through multiple platforms

Support windows PC, iPhone, android mobile access

Motion detection and alarm notification

When motion is detected, the camera will beep, and press the alarm in the APP.

You can also set it to record to SD card when motion is detected.

Max support 64G micro SD card

Wi-Fi IP Sannce I21AG PTZ camera. Instructions for setting up in Russian

Instructions for setting up the camera are presented on the example of the Sannce I21AG camera model

This guide describes how to set up and connect a Sannce camera using a mobile application, as well as set up a Video Archive recording and playback.

Unpack the camera

3) Mounting base

5) A bag with self-tapping screws and tools for resetting settings

Download and install the free Sannce cam app on your smartphone (from PlayMarket or App Store)

Connect the power cable to the camera and connect the power adapter to the mains to turn on the camera.

After connecting the power, the camera will start downloading. Wait until the camera is fully loaded.

To set up, the phone must be connected to the Internet via your Wi-Fi network

Launch the app and click “Add Device”

Click the button at the bottom of the Wireless Configuration WI-FI screen

Click “Camera”

Click “Next”

A window will open in front of you, in which the data for connecting to your Wi-Fi network should be indicated. After specifying the network name and network password, click the “Start Configuration” button

Bring the phone closer to your camera and wait for the camera to say that the setting was successful. While configuring the camera, the following window will appear on the screen

After finishing the camera setup, it will be displayed on the phone screen. If this does not happen, repeat the setup again.

Click the found camera on the phone screen

In the new window that opens, click the “Confirm” (Done) button to save the camera settings

Next, the program asks to change the camera password. Click OK

Enter a new administrator password and click “Save” (Done)

Click on the added camera to open the online video viewing

You will see an online video viewing from the camera. To rotate the camera Swipe up, down, left or right on the phone screen.

To open additional functions, click on the corner of the screen where the red arrow shows.

After clicking on the screen, additional buttons will be displayed

To change the image quality, click on the highlighted button and select the desired video quality

To use two-way audio transmission, click the speaker button

To adjust the brightness, click the highlighted button in the next picture

Recording and playback Video archive of Sannce Wi-Fi cameras

To record Video Archive, insert a memory card into the top slot of the Sannce camera

Next, in the Sannce Cam mobile application, open the device letter and click the settings button near the camera

In the settings, open the “SD setting”

Click “SD card format” and then click OK to confirm formatting the card

Comment: After formatting the card, enable the desired recording modes: record coverage, voice record, timer recording. To do this, click the corresponding switch to switch it to “on” mode.

To view the Video Archive in the Sannce Cam application, you must go back to the device list and name it “Messages”

Now you need to name the camera itself

Now, at the bottom of the screen, press the button to display the Video archive (local recordings or remote recordings)

Instructions for setting up a rotary Wi-Fi IP camera Hiseeu

Hisseu Wi-Fi PTZ Camera Setup Instructions

Instructions for setting up the camera are presented using the example of the Hiseeu FH2A camera.

The installation guide is suitable for most cameras working with YYP2P, Yoosee mobile apps

Unpack the camera

5) Self-tapping screws and a device for resetting settings

Download and install the free YYP2P or Yoosee app on your smartphone (from PlayMarket or App Store)

Run the installed application. If you do not have an account, then click “Register”

To register, enter your e-mail, password and Confirm password, fulfilling the requirements of the program (your e-mail address must NOT be previously registered in the system, the password must have a certain level of complexity). Click “register” (Immediately register)

In case of successful registration, the program will display the following message. Click “Confirmed”

Next, you need to log in to the program. To do this, select the country and enter your previously specified email address and password and click “Login”

After authorization, in the upper right corner, click “” to add a new device.

Humidity settings The phone must be connected to your Wi-Fi network. If you have an Android phone, a window will open in front of you, where you will need to select “Add new device”

Next click Smartlink

In another version of the program, you can immediately select Smartlink

Next, select the Wi-Fi connection (Connect via WI-FI)

In the application on the phone, a window will open in front of you where you must enter the password for your Wi-Fi network. Enter the network password and click next

Next, you need to connect the power supply to the camera and connect the power supply to the network to turn on the camera. You must wait until the camera is loaded.

If the camera has already connected to a router before, then you need to reset the settings.

To reset the camera settings, take the special tool from the camera box. Insert it lightly into the hole on the bottom of the camera. Hold for a few seconds until you hear a beep. After that, the camera will reboot and start emitting short beeps indicating that the camera is ready to configure it.

When you hear the periodic beeps from the camera, click on the phone “Her connection cue tone”

Turn up the volume of your phone to maximum and click “Next step”

Your phone will start with a beeping sound. Bring your phone closer to the camera and wait for the setup to finish

In the process of setting up the camera, a window will open in front of you, where you will need to enter the login and password of the camera (by default login. Admin, password. 123)

After completing the configuration, a red icon will be displayed next to the added camera, indicating the low complexity of your password. By clicking on this button, you can change your password to a more complex one.

To view the live broadcast of the camera, click on the camera image. You will be prompted to turn on your microphone. Click confirm (OK)

If you are having difficulty connecting wirelessly, you can use the wired setup. To do this, in paragraph 8 of the current instruction, instead of a Wi-Fi connection, select a wired connection and click on.

In this case, the camera must be connected to the router with a network cable.

In this case, the program itself will display the connected camera to the local network.

Click “” and enter the username and password of the camera (by default, login. Admin, password. 123)

Next, click the camera settings button

Select “Network setting”

Here you can switch the camera connection from wired to Wi-Fi by selecting your Wi-Fi network and specifying a password for accessing the network. After saving the settings, you can disconnect the network cable from the camera, after which the camera will work with the introduction of your Wi-Fi network.

To record the archive in the camera, you can install a microSD memory card up to 64GB

You can read a more detailed description of working with archive recording on the page describing how to configure yoosee cameras

How to find the IP camera address

IP cameras differ from analog cameras Not only in resolution, digital protocol, but also in the way they are connected to a recording device. If it is enough to connect an ordinary camera to the DVR or to the input of the video capture card and you can enjoy, contemplating the image from this camera, then in order to view the image from the IP camera, you need not only connect it to a computer or computer network through a switch, you also need to find out its IP addresses.

How to find the IP address of a video camera?

There are several ways.

Firstly, if there is an instruction for the video camera, it should contain what IP address is set in the camera by default. If the IP camera is not new, then it is possible that the IP addresses were changed in it, then reset the camera settings to the factory settings. Click the Reset button.

Default IP address:

• Beward. 192.168.0.99 Login: admin, password: admin
• Dahua. 192.168.1.108 Login: admin, password: admin
• Microdigital. 10.20.30.40 Login: root, password: root
• Novicam. 192.168.0.88 Login: admin, p Arol: absent
• Aircam. 192.168.1.20 Login: ubnt, password: ubnt
• IPEYE. 192.168.0.123 Login: admin, password: 123456
• Hikvision. 192.0.0.64 Username: admin, password: 12345
• Polyvision. 192.168.1.10 Login admin, password: none
• Space Technology. In older cameras, DHCP is enabled by default, the camera can be found and the IP address can be viewed / changed using this program. Login: admin, password: 12345, new. Default IP: 192.168.0.100
• Matrixtech. 192.168.1.120 Username: admin, password: 1111
• Giraff. 192.168.1.10 Login: admin, no password

Here I would like to note that it is not worthwhile to connect several IP cameras to one network at once, especially if these are cameras from the same manufacturer. T.K. They all initially have the same IP addresses, then there will be a conflict in the network. First connect one IP camera, change IP addresses in it in accordance with your subnet, then the second, etc.

Secondly, each IP camera must come with software that will allow you to quickly find the connected camera on the network, if necessary, change this address and make all the necessary settings. On this page, we will post links to similar software if you suddenly lost the CD that came with the IP camera and cannot determine the IP address of this camera.

Thirdly, in order to find out the IP address of the camera, or the second device (router, router, modem, second computer connected to your network), you can use a simple program to scan IP addresses. An example of such a program can serve as a tool Angry IP Scan. With this simple program with an intuitive interface, you can not only scan all the IP addresses in your network, but also find out the MAC addresses of the device and its response speed.

It is enough to specify the range of scanned addresses in the program and press the START button, and all scanned addresses will appear in the list. Available IP address will be marked with a blue circle. If you do not know the subnet of your IP camera, enter the range 192.168.0.0. 192.168.255.255, while scanning can take quite a long time.

By the way, with the help of this simple program you can detect all unauthorized connections to your wireless network in order to further add their IP address to the blacklist of your router.

Below we present a list of programs to determine the IP address of a specific IP cameras:

In order to find out the IP addresses of a digital video camera, you can use universal software that supports a large number of different IP cameras, for example Macroscop or Line software.

In conclusion, it seems, and it will not be superfluous to remind that for the successful collaboration of the IP addresses of your computer and the addresses of your IP cameras must be in the same subnet, i.e. Penultimate numbers IP address Must be the same. This applies not only to IP cameras, but also to all digital devices operating in one computer network.

Review: Hiseeu FH2A IP camera. Inexpensive and easy to set up and use home video surveillance system

Hisseu Wi-Fi PTZ Camera Setup Instructions

Instructions for setting up the camera are presented using the example of the Hiseeu FH2A camera.

The installation guide is suitable for most cameras working with YYP2P, Yoosee mobile apps

Unpack the camera

5) Self-tapping screws and a device for resetting settings

Download and install the free YYP2P or Yoosee app on your smartphone (from PlayMarket or App Store)

Run the installed application. If you do not have an account, then click “Register”

To register, enter your e-mail, password and Confirm password, fulfilling the requirements of the program (your e-mail address must NOT be previously registered in the system, the password must have a certain level of complexity). Click “register” (Immediately register)

In case of successful registration, the program will display the following message. Click “Confirmed”

Next, you need to log in to the program. To do this, select the country and enter your previously specified email address and password and click “Login”

After authorization, in the upper right corner, click “” to add a new device.

Humidity settings The phone must be connected to your Wi-Fi network. If you have an Android phone, a window will open in front of you, where you will need to select “Add new device”

Next click Smartlink

In another version of the program, you can immediately select Smartlink

Next, select the Wi-Fi connection (Connect via WI-FI)

In the application on the phone, a window will open in front of you where you must enter the password for your Wi-Fi network. Enter the network password and click next

Next, you need to connect the power supply to the camera and connect the power supply to the network to turn on the camera. You must wait until the camera is loaded.

If the camera has already connected to a router before, then you need to reset the settings.

To reset the camera settings, take the special tool from the camera box. Insert it lightly into the hole on the bottom of the camera. Hold for a few seconds until you hear a beep. After that, the camera will reboot and start emitting short beeps indicating that the camera is ready to configure it.

When you hear the periodic beeps from the camera, click on the phone “Her connection cue tone”

Turn up the volume of your phone to maximum and click “Next step”

Your phone will start with a beeping sound. Bring your phone closer to the camera and wait for the setup to finish

In the process of setting up the camera, a window will open in front of you, where you will need to enter the login and password of the camera (by default login. Admin, password. 123)

After completing the configuration, a red icon will be displayed next to the added camera, indicating the low complexity of your password. By clicking on this button, you can change your password to a more complex one.

To view the live broadcast of the camera, click on the camera image. You will be prompted to turn on your microphone. Click confirm (OK)

If you are having difficulty connecting wirelessly, you can use the wired setup. To do this, in paragraph 8 of the current instruction, instead of a Wi-Fi connection, select a wired connection and click on.

In this case, the camera must be connected to the router with a network cable.

In this case, the program itself will display the connected camera to the local network.

Click “” and enter the username and password of the camera (by default, login. Admin, password. 123)

Next, click the camera settings button

Select “Network setting”

Here you can switch the camera connection from wired to Wi-Fi by selecting your Wi-Fi network and specifying a password for accessing the network. After saving the settings, you can disconnect the network cable from the camera, after which the camera will work with the introduction of your Wi-Fi network.

To record the archive in the camera, you can install a microSD memory card up to 64GB

You can read a more detailed description of working with archive recording on the page describing how to configure yoosee cameras

Modern CCTV cameras DO NOT require deep technical knowledge to connect to a computer or mobile device and configure the required parameters. Any user can do it on their own. To connect and configure, you will need to study the instructions and take care of the availability of special software. The devices can be connected to a computer using a wired connection and an IP connection.

How to connect IP camera hiseeu?

IP video surveillance cameras from the Chinese company Hiseeu are well known in the Russian market. They are reliable, durable and do not require additional maintenance. All devices have infrared illumination, work well at night. They can be mounted outdoors, the plastic case reliably protects the electronic contents from bad weather. The IP camera can be used to ensure the security of a private house, office, industrial area.

Installation and configuration work begins with familiarization with the design of the device and studying the instructions. When you open the branded packaging, you can see:

• IP camera. Among its elements, it is necessary to note an HD lens, a light sensor, and IR illumination. There are three connectors for connecting wires in the ip-camera stand;
• Holder (bracket), thanks to which the camera is fixed on the selected plane, on the street or in the office;
• Power supply unit providing autonomous operation of the device;
• Self-tapping screws, designed for fastening with plastic cases for them;
• Factory reset tool;
• Wires. This is a normal twisted-pair Ethernet, thanks to which the device will be directly connected to a computer workstation. If it is necessary to connect several cameras, then this can be done using a router;
• Instructions.

But only the technical part of connecting the camera to a computer or additionally to a smartphone will not be enough. The user will have to take care of the availability of software that will ensure the operation of the device.

To connect using a twisted pair cable or a router, the device is connected to a computer, after which you can start configuring it. The software works with all recent versions of Windows, there is no conflict.

Hiseeu 1080p ip camera works with YYP2P or Yoosee software when connected to a smartphone. Both of THESE apps can be downloaded for free from PlayMarket or the App Store. After downloading it, you need to run it, for this you need to Register Registration instructions will appear on the screen of your smartphone, use it no difficulty.

To install an ip-camera on a computer, the software will need to be downloaded from the manufacturer’s website, the screenshot is below. Then the software must be launched following the instructions:

• Click in the CMS popup.
• Select language.
• Login using the login and password, which are in the installation instructions.
• Select one of the devices.
• Add new device.

Hiseeu camera default ip address

Connecting an ip-camera to a computer will require setting its own individual IP-address, thanks to which it will become compatible with the local network and it will be possible to view the image from it via the web interface. Creating a new ip address requires knowing the old one. Almost all of them at the first installation have the addresses 192.168.1.10. But to avoid mistakes, it is specified in the program, it can also be found on the camera packaging. Most often it will be written on a small plastic sticker on a cardboard box.

IMPORTANT: Since the ip-address is the same for all ip-cameras, if it is necessary to connect not one, but two or three devices to the computer, the addresses of all will need to be changed. Otherwise, there will be a conflict of devices, and they all refuse to work.

The option “change address” is in the program. In order to find a unique serial ID-camera, knowledge of which is necessary to provide the ability to view images from a camera on a remote access, from a mobile phone, in the CMS menu, right-click on the mouse icon and enter the command “Configuration device”. An “info” button will appear in the drop-down panel, you need to select it. Next, a separate “version” menu will appear, it is in it that you can find the desired identifier.

Setting up hiseeu

After finding the IP addresses, you can try to enter the device interface using a regular browser. But it can be argued with a 100% guarantee that the first attempt to log in will not give an opportunity to connect to the camera and see on the monitor screen what is happening in the yard or in the next room. The initial settings of the home workstation and the camera are NOT the same, they use different types of networks, so the settings must be synchronized. It is for this that you will need a successfully Discovered IP address of the camera. But it is not enough, you need to find the addresses of your own local network and replace the camera address. This does not require special knowledge, all the information is in the “Start” menu of your home computer:

• Select the tab for managing networks and admission settings in the control panel, open it.
• Find the item “Connect via local network”. In some versions, you can see the “Ethernet” item instead. Enter the tab.
• A window titled “Details” appears. Entering it, you will be able to find a tab in which your own IP address of the local network of the home workstation will be registered.
• After the addresses are found, the camera address must be replaced. This is done in a previously installed program. To generate a working ip-address, you need to take the address of your home local network, it can look like this: 192.168.99 and as the last digits it will put the last digit of the standard camera address, 168.1.10. The network subnet address “99” replaces the camera subnet address “1”, an identifier is added to it. Thus, the new device address will look like this: 192.168.99.10. Replacing the IP address will ensure high-quality operation of the device and will NOT affect its settings in any way.

It is possible to Synchronize the ip-camera and the network using its web interface. This can also be done using the standard features of a home computer. The sequence of actions is as follows:

Select in the control panel the tab for managing networks and admission settings, open it.

After the “registration” of the ip-camera, it is assigned a port. By default, for all cameras, it has the parameter “80”, so each new one will receive a port in the format “8001”, “8002” and so on. The IP camera is disconnected from the computer, its cord is connected to the router, then the manual settings in the home station are replaced with automatic.

Each ip-camera is installed with its own addresses and ports to avoid conflict, so the third one in turn will receive the address 192.168.99.10/8083. After connecting, you can check the functionality of the device.

Watching the video setting up the Hiseeu 1080P IP camera

Recently, the installation of video surveillance in summer cottages and in houses has begun to gain popularity. Cameras have become cheaper and more affordable, and thanks to the possibility of using WI-FI to connect to the network, there is no need to pull the Internet wire. You just need to supply power and connect the camera to the router.

There are a huge number of cameras from different manufacturers. They all use different software to operate the camera and set it up. In this article, we will take a look at how to set up your Yoosee camera. This is not a camera manufacturer, but a company that makes camera management software and licenses it to manufacturers. Many cameras use this technology, but their setup is always the same.

Yoosee camera setup

Preparing the Yoosee camera

Our camera looks like this:

First you need to collect it. If your camera comes with an antenna, screw it to the Corresponding socket. If you want the camera to be able to record video, you need to insert a memory card into it. To do this, unwind the camera:

Find the memory card slot and insert it there. Usually you need a microSD card, the same as for smartphones:

Insert the memory card with a click so that it locks in place. Usually the camera has a connector for connecting a power supply, an Ethernet cable, and a reset button:

Connect the power adapter to the camera in the corresponding socket:

Then plug it in and wait for it to click. The camera is ready to connect. To be sure, you can open the reset button, hold down and hold it until you click. After you release the button, the camera will click again. She is ready to connect.

Installing the Yoosee app

Next, we need to install the Yoosee app from GooglePlay:

Once the installation is complete, open the app:

Here you need to Register. Click the “Quick Registration” button. You can Register by phone number or email. I chose the Email option. To do this, click on the link at the bottom of the screen:

You will need to enter a confirmation code, which will come to the specified mail.

Adding a camera via WI-FI

After registration is complete, you will see a screen with a list of devices:

To add a new camera, click the button with the icon In the drop-down list, select Add device:

Then select the Fast Networking option:

If the camera has already clicked (in the second paragraph, when you connected it to the network), press the Hear the dial tone button, the button may be called and the Chinese do not know how to translate in a different way:

Then enter the name of your access point and password to it:

Then wait for the connection to complete. It works like this: after turning on, the camera switches to the access point mode. Your smartphone connects to its network and transmits connection data to the main WI-FI network. Then the camera only needs to disconnect its access point and connect to your network. Next, a message like this will appear where you can configure the camera:

When done, click the Check device button:

Connecting the camera via Ethernet

If the camera connection via WI-FI does not work, for example, the program cannot transfer the connection data to the network to the camera, then Ethernet can be used. For this we need a cord like this:

You can take the cord with which the computer is connected to the router. Connect one end to the camera and the other to an available port on your router. In the application, the procedure is the same. You just need to choose a wired connection:

Then make sure the camera and smartphone are connected to the same router:

On the next screen, the app will find the connected camera:

In this connection option, the utility will ask for the device password. It can be found on the camera body. Usually, this is something as simple as 123:

And then everything, as in the previous paragraph.

Once the camera is connected, you can manually specify the data for connecting to the WI-FI network. To do this, open the settings and select the network settings:

Select the required network in the list of networks, and then enter the password for this network:

Now the camera is connected to WI-FI, and the Ethernet wire can be disconnected.

Camera view mode

Then you will see a screen with a picture from the camera and controls:

At the top of the window, we can see the current time. Using the button below the video, you can adjust the quality:

And with the help of the four buttons at the bottom you can turn on recording, speaks through the camera, however, my model has a speaker, take a screenshot, turn on the transmission of sound from the camera.

Camera time setting

The default camera time may NOT match what you want. To configure it, we need to go to the settings. To do this, click on the gear button in the upper right corner:

Then select time settings:

You can manually set the time here, but it’s better to specify the time zone:

RTSP setup

RTSP. it is a protocol with which you can view video from a camera from the local network to which it connects. By default, it does not require a password. But it is desirable to install it. To do this, in the settings menu, select Security settings, and then RTSP Password:

Then select RTSP encrypted access and specify the password:

Recording setup

By default, recording is done manually only. But on the Record Setting tab, you can enable continuous recording or alarm recording. For continuous recording, select Schedule Recording and the time from 00 to 24 hours.

Alarm recording is a more interesting option. Video will only be recorded when there is movement. But there is one caveat. It works only when the camera is connected to the Internet. Otherwise it will NOT work. To activate it, turn on alarm recording and select the time, for example, 3 minutes:

Next, go to Alarm Settings in the main menu and enable motion detection:

And that’s not all. Now we return to the list of devices, and press the Protection button to enable protection mode when the alarm is triggered.

That’s it, the yoosee setup is complete, now when the slightest movement occurs, an alarm will be triggered:

Viewing recorded video

On the Snapshots tab, you can view all recorded video and snapshots from the camera:

How to untie the camera

You already know how to connect yoosee IP camera. If you need to unbind the camera, even if It is not connected to the network, Tap the camera in the list of devices and Do not let go until a menu appears asking you to unbind the camera:

It remains only to confirm the decoupling:

Please note that if the yoosee camera was already tied, then you will NOT be able to tether it again, you will first need to reset it, as described in the first paragraph.

In this article, we looked at how to configure the Yoosee camera. Despite all the advantages of the camera, it also has disadvantages, for example, if the camera is connected to a router, but there is no Internet access, the application will not find it, even over a wired connection. Of course, alarm recording without Internet access also does not work. What cameras do you use? Write in the comments!

Description. Panoramic HD IP camera Hiseeu P6, with built-in WI-FI for wireless video surveillance

A panoramic camera from the famous brand Hiseeu, with a built-in WI-FI module, allows you to organize an online IP video surveillance system in any room without the involvement of specialists.

This panoramic IP camera Hiseeu P6, thanks to the installed Fisheye lens design, allows coverage of a viewing angle of 360 degrees, which in turn will make it possible to view the entire room as a whole and replace 4-5 standard cameras at once (with a view of 75 degrees)

It is enough to connect the panoramic IP camera to the sockets and to your WI-FI wireless network (it is also possible to connect to the Internet with a LAN cable) Installing and configuring an IP camera, It will take you no more than 10 minutes. Ease of setup and management is done through the program (included). Which can be installed on any PC under Windows, or on a smartphone, tablet under Android or IOS. You can easily remotely (from anywhere in the world) monitor the events taking place around the camera. Excellent quality HD video 1280960. Transmits all the details of the picture to your remote screen in the best possible way. Also, the wireless IP camera has a built-in microphone and speaker, which makes it possible to make audio recording and listen to the sound in the area, as well as communicate through an IP camera, which also allows you to use it as a video radio nanny. Video can also be recorded to an SD card that is installed directly into the camera. Hiseeu P6 IP Camera can be installed on ceiling or wall.

This type of wireless WI-FI cameras is perfect for home video surveillance for offices, bars, restaurants, warehouses, etc.

Main characteristics and functions of IP camera Hiseeu P6:

Hiseeu Wireless IP Camera Specifications:

Model: HSY. P6

Network: wi-fi / 802.11 / b / g, LAN RJ45

Lens: 1.44mm, Sony CMOS sensor, HD 960p

Viewing angle: 360 degrees

Dimensions: 70mm x 70mm x 35mm;

Audio: built-in sensitive microphone, speaker;

Motion sensor: yes;

IR sensors for night shooting: yes;

Video compression format: mpeg4, mjpeg, H.264;

Min LUX: 0.4LUX / F2.0

Operating systems support: Android, IOS, Windows;

Camera robot for children’s room

Hiseeu FHMI PTZ PTZ home camera model gives you the opportunity to install a video surveillance device that looks like a toy at home, for example, in a children’s room. At the same time, traditionally, for this type of camera, connection to WI-FI and remote control through the application on your mobile phone or tablet are supported.

The device is based on a sensitive 1.3 megapixel CMOS sensor, which provides a high-quality 960p picture in day and night conditions. Video in night mode is black and white, visibility up to 10 m, which will allow you, together with the ability to rotate the lens, to examine the whole room in detail. There is also a built-in motion sensor, thanks to which you can receive an alert that someone is in the room.

Separately, it should be noted the two-way voice communication system from the speaker and 4 built-in microphones of excellent quality, which allow you to hear any sound and communicate. A memory card with a capacity of up to 64 GB can serve as a storage location for videos, you have full online access to them.

To remotely control the camera, install the Yoosee application on your smartphone, with which, in addition to online viewing, lens rotation and voice communication, you can enable motion sensor recording, set up notifications, and view what is recorded on the memory card. Support for CMS client for computers has been implemented. PTZ cameras such as Hiseeu FHMI, you can easily use as a compact home video surveillance system, as well as a video nanny for children or pets.

Main features and characteristics

• Rotatable home camera toy work, with wireless connection.
• 1.3 MP CMOS sensor for good images day and night. Video resolution 960p.
• Visibility distance at night up to 10 m.
• Built-in motion sensor, shooting when a moving object appears.
• Camera rotation angle 355 degrees horizontally and 45 degrees vertically.
• Fully functional Yoosee mobile app. P2P client support for computer use.
• Two-way voice communication. 4 built-in microphones allow you to hear everything that happens in the room.
• Slot for memory cards up to 64 GB.
• Powered from a 220 V network via the included power supply.

Brief operating instructions

• To get started, install the Yoosee app on your phone or tablet, create your account in it.
• Insert the memory card into the slot on the top. Connect the camera to the network using the supplied cable and power adapter. The camera will beep.
• In the main application window, press “” and select the SmartLink option, enter the password and name of your WI-FI network. Then click on “Heard a dial tone” and “Send sound waves”. When the phone starts emitting sound waves, place it next to it and wait until the connection is established.
• In order to switch to viewing video from the camera, click on the device window in the application. To rotate the camera, slide your finger in the desired direction. Go to the device settings and select the ones you need by clicking on the gear icon.
• To configure the CMS client, download and install the software on your computer from the site specified in the instructions. In the application on the smartphone, in the settings item, enable the RTSP connection and set a password for it.
• Next, in the program window on the computer, click “”, the camera should be detected automatically. Click on the “Manual configuration” button and in the window that opens, enter the camera parameters, including the IP address and the required passwords, which are specified in the instructions. If the connection is successful, the video will start streaming.
• The functions of camera rotation, recording and sound settings, interaction with the video archive are the same as in the mobile application.

Attention! Without connecting the camera to the mobile application and registering a CMS account, the client is NOT available.