iPhone won’t turn on after update

And get the best deals from trusted masters.

  • Compare and choose the best conditions
  • Feedback from interested professionals only
  • Don’t waste time communicating with intermediaries

If your iPhone won’t turn on after a software update, you can try to restore your smartphone to work on your own. Unfortunately, almost every owner of Apple products faced the problem of a non-working iPhone after the updates.

find, iphone, update

How to restore your smartphone to work

If you have updated the OS of an Apple phone to the latest version, and it turns off and does not boot after the update, you should try to reanimate it yourself.

The iPhone recovery process depends on the reason for the shutdown when updating the software. First, try putting the phone on charge (it is advisable to use the original charger, since Apple products do not respond well to left-hand accessories). Updating the software can take a long time and therefore drain the battery.

If the battery runs out during updates and the phone refuses to turn on, connect it to a power source for at least a day. If the problem lies in a discharged battery, the result will not appear earlier.

If the phone still does not turn on after a day of charging, you can try restarting the gadget. Hard reset iPhone is the very first procedure for various minor breakdowns. It is used if there are any minor malfunctions in the Apple technology.

If the phone does not turn on, you can use a hard reset of the device. To restart your phone, you need to do the following:

  • simultaneously press the “Home” button and the power button, which is located on top
  • hold the buttons in this position for 12-20 seconds
  • as a result, the Apple logo should appear on the screen

If the screen still does not turn on after you update your iPhone, the lock problem is likely to lie in the internal details of the gadget or in the software in which the settings were reset.

After trying all the above recommendations, and finding that after updating the iPhone does not boot even after a hard reset of the device, you should not try to start the recovery process further.

If the breakdown, after which the iPhone does not turn on when you updated it, lies in the microcircuit, only a professional technician will be able to diagnose and repair the gadget to restore it.

The repair process consists of the following steps:

  • neat iPhone disassembly
  • diagnostics to determine the reasons why the phone does not turn on after performing a software update
  • determination of the cause of the malfunction
  • removing spoiled items
  • installation of new parts
  • flashing the smartphone if necessary
  • assembling and checking the result

Only a professional will be able to solve the problem if the phone is locked and it does not turn on after the update.

If a hard reboot or charging of the device when updating the OS did not help you, you should immediately seek help from a professional who is ready to provide inexpensive repair services. Self-parsing and an attempt to change the original parts will only lead to even more serious damage to the gadget.

Causes of malfunction

IOS software updates are essential for your device to run smoothly and productively. Every software has at least one error, according to the law of programming. Specialists who develop the program constantly “catch” errors, eliminate them and improve the phone OS to exclude emerging and possible software failures.

But sometimes the iPhone turns off and won’t boot after the update. You should not immediately carry the gadget to the service center, you can try to start the recovery mode with your own hands. The reasons for this problem are called the following:

  • the smartphone is simply discharged, as the update requires a lot of energy
  • the memory chip is out of order
  • the power button broke when the device was rebooted
  • removed the binding to the location operator
  • The firmware “flew” (program collection and reset)

In some cases, you can try to solve the problem on your own, without the help of specialists. To do this, if the iPhone has updated and does not turn on, use the recommendations below for recovery mode.

Where to find a professional

If your iPhone does not turn on after updating iOS and attempts to restore the smartphone on your own did not work, you should contact an experienced wizard. Submit an application through YouDo if your iPhone does not turn on, and indicate the signs of breakage and the model of the gadget in it. Specialists will leave their suggestions.

Also check out the wizard profiles to see how much it costs to repair your iPhone if it won’t turn on after an update.

Other Ways to Get iPhone Out of “Recovery Mode” (Difficult and Data Loss)

A way to exit Recovery Mode. Forcibly restart by holding down the Home button, Power, and holding these buttons for 10-15 seconds. After that, your device restarts.

If this does not work, there is also a second way to get rid of the black screen with the cable and iTunes image. restore to iTunes, But it will erase all the contents, so create a backup before using it.

  • Download and install iTunes on your computer.
  • Open iTunes, connect device to PC with USB cable.
  • Wait for the image of the iPhone with the cable connected to appear on the screen.
  • Press the “Restore” button in the aytyuns. the device will start working again as usual.

Resolve freeze in recovery mode with Tenorshare ReiBoot (Free and one click)

First download and host Tenorshare ReiBoot on your computer. Connect iPhone / iPad / iPod touch to your computer using USB cables. Then Tenorshare ReiBoot will recognize your device in recovery mode, click the “Exit Recovery Mode” button. Wait a bit and the device will reboot safely. In this process, do not disconnect the device.

See also  How to close apps on iPhone 11

Of course, Tenorshare ReiBoot can quickly and easily solve your freeze problems and wake up your iPhone from recovery mode. If your iPhone is still stuck in recovery mode or after a while the system got on the screen, did not respond, maybe due to a damaged file system, then fix the operating system to restore it completely without losing data.

What is Recovery Mode?

Recovery Mode, open mode when the device is turned off and the USB connection is active. It is through this mode that the flashing and “Update” take place. If you connect the iDevice in this mode to iTunes, then you will see a message that the program has detected “The device is in recovery mode”. The USB cable and iTunes icon will be displayed on the screen.

Stuck in recovery mode after iOS 10/11/12 update for iPhone, how to?

We are sure that many have encountered a freeze in the recovery mode after updating iOS 12/11 / 10.3 / 10.2.1 / 10.2 / 10.1 / 10/9, especially users of the iPhone X / 8/7/7 Plus, SE, 6s / 6s Plus / 6/6 Plus, 5s / 5c / 5, 4S, iPad or iPod touch. When you see the USB cable and the iTunes icon on the screen of your iPhone, it means that the iPhone is in recovery mode. Today I will tell you how to get iPhone out of recovery mode, how to solve iPhone stuck in recovery mode.

Reasons Why iPhone Stuck in Recovery Mode

iPhone freezes in recovery mode, there are several phenomena. May be:

  • hardware and software failure
  • after / during jailbreak
  • after / during iOS 12/11 / 10.3 / 10.2.1 / 10.2 / 10.1 / 10 update
  • file system corruption

With Tenoeshare Tenorshare ReiBoot, you can quickly and easily fix problems, including stuck on apple logo / black screen / during startup / blue screen of death, delay in DFU / recovery mode / Home button, errors (iTunes was wrong in sync / update / restore iOS device) to iPhone / iPad / iPod, without data loss or damage. Welcome to use our products.

What to do if Notes and Reminders apps close on iOS 13

With iOS 13, Apple has powerfully revamped the default Notes and Reminders apps. Because of this, some users experience crashes. Applications close immediately after opening. This issue is resolved by logging out of the iCloud account on the device and then logging in again.

Top iOS 13 issues and solutions, including iOS 13.1, iOS 13.2, iOS 13.3, iOS 13.4, iOS 13.5, iOS 13.6, iOS 13.7

iOS 13 is a great update, which, however, is not devoid of bugs and flaws. In this article, we collect all the most popular and annoying problems in iOS 13 and find ways to solve them. Didn’t find your bug? Describe it in the Комментарии и мнения владельцев. we will try to find a solution!

Note: All of these tips apply to iPadOS as well.

“Mail” does not show notifications and the number of incoming letters

The default Mail app in iOS 13 works intermittently. For many users, it stopped showing notifications about incoming letters. In addition, the number of unread messages is not displayed on the application icon.

One solution to the problem is to uninstall the Mail app and reinstall it from the App Store. Re-signing in to the email account used in the app can also help.

New FindMy Items Feature LEAKED. EVERYTHING You Should Know!

Update: Apple has fixed this issue in the final version of iOS 13.1, which was released on September 24.

What to do if your mistake is not on the list

Describe your problem in the Комментарии и мнения владельцев! We will try to find a solution to any of your problems with an iPhone running iOS 13 as quickly as possible.

Please rate 5 stars at the bottom of the article if you like this topic. Subscribe to us Telegram. In contact with. Instagram. Youtube.

Instagram Stories Increase and Decrease Volume

One of the most unusual bugs in the Instagram app in iOS 13. When viewing Stories, the volume automatically decreases and increases. It is assumed that the problem is with the Instagram application, as other applications do not have this bug. Stay tuned for Instagram updates on the App Store. The problem should be corrected in the coming days.

iPhone on iOS 13 does not catch on the subway or loses connection

Some iPhone users on iOS 13 reported in our group on that after installing the update, communication in the metro deteriorated. In order to fix this problem, it is enough to reset the network settings in the menu “Settings” → “General” → “Reset” → “Reset network settings”.

If updating your network settings does not help, perform a clean install of iOS 13 using the instructions above.

Games slow down on iOS 13. what to do

Another common complaint is game slowdowns, which previously worked fine on iOS 12. In most cases, this problem is resolved by performing a hard reboot. Detailed instructions for performing such a reboot on all iPhone models are presented above.

IOS crash

The ineffectiveness of the above measures tells the user that the problem may be in the software. For the gadget to work correctly, the latest system updates are required. To check if there are available updates, the user needs to follow the path “Settings”. “General”. “Software update”.

If, as a result of the verification, the iPhone finds newer software than is installed on the device, the user should download it. If there is nowhere to update further, you need to refer to the procedure for flashing the gadget. This procedure is simple and does not require contacting the service center. any user will be able to perform it with his own hand. To help a newbie, our article on flashing iPhone.

Weak GSM signal

If the reason for the weak signal is that the user’s place of residence is not within the GSM coverage area, the problem cannot be fixed on your own. You will have to buy a SIM card for temporary use. Although, in fact, the territory where there is absolutely no GSM signal, you still need to look.

There are also areas where the signal is very poor in large cities. As a rule, iPhones are not caught in the subway, basements, elevators. The network can disappear inside the building due to the fact that the concrete walls of the room jam the GSM signal. In some buildings, jammers are deliberately used to prevent employees from over-engaging in Internet surfing. The “jammers” look like this:

Earlier, “jammers” were willingly placed in educational institutions. Now the use of such devices is minimized. the modern educational process involves an active student’s appeal to the mobile Internet.

If the GSM signal is weakened in the user’s home, this is a reason to file a complaint with the service provider. The iPhone owner needs to call the hot line mowing line and complain about the lack of network. The application will be forwarded to the technical department, whose employees will make every effort to solve the problem.

Why iPhone won’t catch the network: the main reasons

If your iPhone doesn’t pick up the network, you shouldn’t immediately panic and look for a suitable service center. Perhaps the problem isn’t worth a damn. What can cause the loss of GSM-signal on the “apple device”?

See also  Can I find iPhone without SIM card

It is not a pleasant situation to be “on hand” with an iPhone that does not catch the network, on a trip or on a business trip. The boss will be annoyed that his employee is unavailable and did not submit a timely report, relatives will be worn out with anxiety, potential clients will be off the hook. Even calling for help or a taxi, should something happen to the car, it will be impossible. It should be admitted that modern people are heavily dependent on the GSM signal.

Fortunately, in most situations, you can fix the problem of a weak network on an iPhone by yourself and rather quickly. In the article we will tell you about the common reasons why the “apple” gadget does not catch the network well, and how to fix the situation.

Problems with the settings of the cellular operator

If the time is set correctly, but the iPhone still does not catch the network, you can suspect that the settings of the cellular operator are lost. A set of such measures will help to solve this problem (each subsequent step must be performed only if the previous one did not work):

Turn airplane mode on and off. The corresponding slider is located at the very beginning of the “Settings” menu.

In the “Settings” go to the “Operator” section and deactivate the “Automatic” toggle switch.

Check if the cellular data settings are correct (APN, username, password). Follow the path “Settings”. “Cellular”. “Cellular data network”. The block “Cellular data” contains the necessary details.

You can find the correct parameters for the top 3 carriers in our article on how to set up Internet on iPhone. In case of mismatch, change the cellular data settings on the “apple” gadget manually. Remember to restart your device after changing the settings.

Time is set incorrectly

The first thing to check on an iPhone that doesn’t pick up a GSM signal is the date / time settings. If the settings are incorrect, you should set the correct ones manually. This is done like this:

Follow the path “Settings”. “General”. “Date and time”.

Find out the exact time in your time zone. To do this, you can use, for example, the Yandex. Time”.

Scrolling the reels, set the correct date, hour and minute.

Restart iPhone and check network.

If you have Wi-Fi access, you can avoid manually setting the time. In the subsection “Date and Time” there is a slider “Automatic”. After activating it, the iPhone independently determines the time in the set time zone. but only if the gadget is connected to the Internet.

Your humble servant prefers not to use the automatic time setting, because his iPhone “counts” one hour more than it should be.

SIM card damaged

Mechanical damage to the SIM card or its incorrect cutting cannot be the reasons why there is no network on the iPhone. If the card is defective, the SIM gadget will not recognize it at all. This is a completely different problem, the possible solutions to which we suggested in the article “Why the iPhone does not see the SIM card”.

However, a user suffering from a lack of network on a smartphone should still have a visual inspection of the SIM card. If there is dirt on the contacts, you need to carefully remove it. Even the fact that the user removed the SIM card and installed it back into the slot can help return the normal GSM signal.

If the owner of the iPhone has suspicions that the gadget does not catch the network well because of the SIM card, he should contact the service office with a passport and replace the SIM. This procedure is free and takes only a couple of minutes.

There was a breakdown of the gadget

If there is a physical breakdown of the iPhone, a visit to the masters cannot be avoided. The failure of the gadget to catch the network, as a rule, is caused by a malfunction of the antenna module. Antenna breakdown is the result of falling or flooding the gadget. The repair cost in this case will depend on the iPhone model. We will collect approximate in a plate:

How to recover files using the “Windows.old” folder

If you installed the Windows 10 operating system using the upgrade process or performed a custom installation without deleting the primary partition, then the system will save a copy of your previous installation in the Windows.old folder, which you can use to restore missing files.

To recover files using the Windows.old folder, follow these steps:

Open the file explorer in any way, for example, double-click the “This PC” shortcut on the desktop.

In the left pane, select the “This PC” section.

In the right pane, find the icon of the system drive “C:” and double-click on it to open.

Find and open the “Windows.old” folder in the list of folders on the system drive.

How to Find Missing / Lost iPhone Even When It’s Offline | IOS 13

The folder contains various saved files. Find the files you need (personal files will be saved in the “Users” folder) and move them to another location.

If you do not see the Windows.old folder, then you may have updated your operating system using a clean installation process that deletes all data on your system drive. It is possible that something happened during the installation and a copy of the previous installation was not saved. Or more than ten days have passed since the update to the latest version of “Windows 10”, in which case the system automatically deletes this folder.

How to restore files using a backup

If none of the above methods worked, and you were unable to recover the lost files, then you will need to use a previous backup to restore them. But be aware that the recovery steps may differ depending on the backup method used.

Below you will find instructions for recovering files using the built-in system tools of the operating system and OneDrive. (If you’ve used a different backup tool, be sure to check the software vendor’s support site for specific instructions.).

Using OneDrive

OneDrive is a cloud storage option that is not located on your computer or external drive, but on the Internet, and you can use it to back up your files. If you are using Dropbox, Google Drive or other storage, be sure to visit their support website for specific instructions.

How to recover files using search

You can also find your lost files by using the Windows 10 search function using the following steps:

Open the file explorer “This PC” by double-clicking on the shortcut on the desktop, or using the keyboard shortcut “Windows E”.

In the left pane of the window, select the directory to search for “This computer”.

Under the ribbon in the upper right corner, enter the required search term in the search box and find the files you need.

If you are looking for files of a specific type, then you can use the asterisk as a wildcard. For example, you can use the search query “.docx” to display all of your Microsoft Word documents.

In addition, you can use the Search tab on the File Explorer main menu ribbon to refine your specific search options. For example, you can click the Other Properties drop-down menu and include additional search criteria. In addition, you can use the drop-down menu in the Type section to quickly find the files you want, including documents, pictures, videos, music, and more.

See also  How to find out the model of a WEB-camera on a laptop

Sometimes, when you upgrade to a newer version of Windows 10, your personal files may move to a different folder. If you can find your files using the search function, right-click one of the files and choose File Location from the pop-up menu. The storage location will open in the file explorer. Then select and move your files to the desired folder.

How to recover files using an administrator account

If you are upgrading from a previous version of Windows 7 to the latest version of Windows 10, and you created a Microsoft account during the upgrade process, your files may end up in the Administrator account, which is currently disabled.

To get your personal files back, you need to use the built-in local administrator account by following the simple steps below.

Open the Computer Management application using any of the following methods of your choice.

Method one: Right-click on the “This PC” shortcut located on the desktop and bring up the pop-up menu. In the list of available actions, select the “Management” section.

Method two: Press the Windows X keyboard shortcut together or right-click the Start button located on the Taskbar and open the pop-up menu. In the list of available applications, select the “Computer Management”.

Method three: Open the “This PC” file explorer. In the “Computer” tab in the ribbon of the main menu, click the “Management” section.

Method four: Click the Start button in the lower left corner of the desktop and open the Windows main user menu. Using the scroll bar, move the slider down and select “Windows Administration Tools” from the list of available applications and programs. Open the submenu, slide the scroll bar down, and click the “Computer Management” section.

In the left pane of the window, go to the following address:

Computer Management (Local). Utilities. Local Users and Groups. Users

In the middle pane of the window, double-click on the “Administrator” account or right-click on it and select the “Properties” section.

In the window that opens, in the “General” tab, uncheck the box “Disable account”.

find, iphone, update

Click the “Apply” and “OK” buttons for the changes made to the properties of the administrator account to take effect.

Log in with an administrator account.

After completing the above steps, you will see all your files again using your local administrator account. Then all you have to do is make a backup and restore all your files to the newly created Microsoft account.

How to recover files after deleting a temporary account

Immediately after updating to the latest version of the Windows 10 operating system, you may notice that your files are no longer available to you, but this is due to the fact that you are logged in using a temporary account.

You can quickly check if you are using a temporary profile by following a few simple steps.

Open the Settings app. This application contains all the basic controls for the operating system and allows you to customize it for the specific wishes of each user. You can open the Settings app in a variety of ways. We will show only some of them, and you can choose the most convenient for you.

Method one: Right-click on the Start button located at the bottom left of the desktop on the Taskbar, or press the Windows X keyboard shortcut together to open the pop-up menu. Select from the list of suggested applications section “Options”.

Method two: Click on the “Taskbar” in the lower right corner of the desktop on the “Windows Action Center” button. A pop-up notification panel will appear on the right side of the screen, with quick action buttons at the bottom. Select from the available options the button “All parameters”.

Method three: Click on the “Start” button on the “Taskbar” and open the main user menu “Windows”. In the left sidebar, click the gear button and immediately open the Settings app. Or, using the scroll bar, slide the slider down the menu, and select from the list of installed applications and programs, the application “Settings”.

Method four: The fastest and easiest way to open the Settings app right away is to press the Windows I keyboard shortcut together.

Select the “Accounts” section on the main page highlighted in the picture above.

In the left pane of the window, go to the “Synchronize your settings” section.

If in the right pane of the window you see a message stating that you are logged in under a temporary account and some parameters are not available to you, then restart your computer.

Note: You may need to restart your computer several times until you see your account on the login screen.

Sign in with your account.

After completing these steps, the temporary account should be gone and you should be able to access your documents, pictures and videos from the original account.

Using Windows 10 Backup

When using the Windows 10 backup function, you can quickly restore one or more files using the following steps:

Open the Control Panel application, which contains all the controls for your computer. This can be done in the following ways.

Method one: Click the Start button in the lower left corner of the desktop and open the Windows main user menu. In the list of available applications and programs, use the scroll bar to move the slider down and find the “System Tools. Windows” section. Open the nested list of available applications and select the “Control Panel” section.

Method two: Click the Search button next to the Start button and type Control Panel in the search box. Select the best match from the list of suggested options and open the application.

In the application window “All Control Panel Items” select the section “Backup and Restore (Windows 7)”.

Move the scroll bar down, and in the “Recover” section, click the “Recover my files” button.

In the window that opens, click the “Browse Files” button.

Browse through the backup archive and select the files you want to restore. Then click the “Add Files” button.

Then, in the File Recovery window, click the Browse for Folders button. Review the backup archive and select the folders that you want to restore, and then click the “Add folders” button. After completing the selection of folders and files to restore, click “Next”.

You can change the number of files and folders selected for recovery from the backup archive, you can delete some selected items from the list of files to recover. Or delete all of them, completely clearing the list, and select new files using the corresponding buttons “Delete” and “Delete all”.

Select the default “Return to original location.” Or, if you want to restore files to an alternative folder, then select the option “To the next location”.

Click the “Browse” button and specify a new location to save your data.

Click the “Restore” button and start the process of saving the selected data.

When finished, click the “Finish” button.

Now all your recovered files and folders will be available in the save location you specified.