PHILIPS 25RT4103

There are points 0053 and 0054 on the board near the processor, they need to be closed. To exit. “Stand by”.

AIWA 1402, 2002, 2102.

Press the S009 button, located on the TV board, at the same time with the Display button on the remote control. To exit the menu, turn off the TV with the remote control.

Can I Enter Samsung TV Service Menu and Change Settings to Fix My TV. pt4

SONY KV-M. КV-2170, КV-2180, КV-2540

In standby mode on the remote control, press the buttons “?”, “5”, “V”, “TV” in sequence. To exit. “Power off”.

LG CF.

Simultaneously press the “OK” buttons on the front of the TV and on the remote control, holding them for a few seconds. To exit, turn off (“Power off”).

PANASONIC TC-25GF10R, TX33GF15P

Set the volume to minimum. Press simultaneously “Recall” on the remote control “V-” on the front panel. To exit, turn off (“Power off”).

SONY КV-25, KV28FD, KV32FD

Press the buttons “Rgod” and “Rgod-” on the control panel and while holding them, turn on the power switch. To exit. “Power off”.

AKAI ST2161, 2565, 2567.

Press the “Mute”, “OK”, “TV” buttons on the remote control. To exit press “TV”.

PHILIPS EPSILON, 14PV100 / 01, 14PV505

Press and hold the “Play” button on the control panel and press the “Stop” button on the remote control and hold for a few seconds. To exit, turn off from the control panel.

entering, samsung, service, menu

What are the functions of the Samsung TV service menu

As already mentioned, the average user is not recommended to experiment with the service menu on Smart TVs, including the Samsung K series or any other series, even J. The point is not that this is a whim of the developers. On the contrary, users can press the wrong key on the remote control, and all settings will fail, which will lead to a complete loss of the normal performance of expensive equipment.

But in the hands of the master who entered the service menu of TVs, it can turn a standard Smart TV into almost a home theater. Nevertheless, sometimes such settings can be opened completely by accident, by involuntarily pressing some key combination. If this happens, then you can change:

  • The spectrum of the image, for example, by choosing a green palette or red, in connection with which, the picture on the screen will become a country. Few people want to watch TV in this format.
  • Screen image size options. It may turn out that the picture will not occupy the entire screen, but only half of it, moreover, from below, from above or from the side. The picture can break into pixels, and tolerate other, unpleasant changes.
  • Naturally, the service menu of a Samsung TV can change the sound parameters, making it so that even at the highest volume, the device is barely audible. Or uses various sound effects, due to which an echo may appear, acoustics will increase, which also does not contribute to a comfortable viewing of content.
  • In addition, once in the service menu of a Samsung TV, you can connect and disconnect various built-in functions.

In general, if the user needs to change any automatic settings, then this is done right here.

How to enter the service menu of a Samsung TV

Any TV, including those that are not smart TV devices, have a service menu that controls vital settings. In particular, the size of the image horizontally and vertically, brightness correction, and other parameters that can seriously affect the operation of the device. Therefore, if you do not understand how and what to do, it is better to leave this service altogether.

It is not surprising that the service menu on Samsung TV is usually called extended, because it is used if you need to make serious changes in the operation of the TV itself. And to use it, you need to have a special remote control. over, it is important that it is “native” for the TV, that is, it comes with it. Otherwise, even if you get into the menu, it will be difficult to be there, since the control is not reliable.

How to get into the service menu of Samsung TV 6

  • Take the remote control and press the following sequence: info. menu. mute. power;
  • Having learned how to enter the service, you need to wait a couple of seconds, since the TV will restart after pressing the specified combination to display the necessary information;
  • After that, the incoming person must learn to move in such a way that they do not accidentally change the settings. If you need to change something, you must press “Enter” and only then enter the amendments;
  • Go to “Control”, “Cloning” and so on;

It is important, before finishing the work in the “Hotel Option” section, to mark “OFF” in order to save some functions from failures. And also, since the user has entered the menu, and knows how to enter here at any time, you still need to understand how to exit and not damage the settings. This is done in this way:

  • You can exit by turning off the TV normally;
  • Then go back to MENU-SYSTEM, and see what has changed;
  • If all is well, we entered without any problems and I am satisfied with the settings, which means that you can continue to use the TV with an updated menu.

What is a service menu and what is it for

The service menu of a Samsung phone is similar to that of a TV. It opens access to hidden device settings. Here you can test the sensors of the phone, its modules and systems, which is very convenient when buying a device from hand. Thanks to Engineering Mode, the user can customize the control, make it more convenient for himself.

Previously, the entrance to this Android area was only open to developers and repairmen.

List of Samsung engineering menu commands

To display information on a smartphone, the following codes are used:

  • #. IMEI;
  • #. OS series;
  • # or #. firmware version;
  • #. serial data;
  • #. energy intensity;
  • #. Dump;

The service mode is activated by the combinations # or #. To enter the error log, dial #. If it is necessary to start loopback testing enter #.

To get into the tuning tables, type:

  • #, # or #. display contrast;
  • #. USB;
  • ##. display;
  • number. GPRS / EDGE;
  • 2767380927 #. WAP;
  • 2767927 # or 276773738927 #. rollback of WAP parameters;
  • 2767380667 #. MMS;
  • 335 #. delete all MMS;
  • #. battery calibration;
  • #. data about the battery;
  • ## or #. battery status;
  • #. battery testing;
  • #. debugger.
  • #. speaker and microphone volume.

Engineering Mode Capabilities

For example, on the Galaxy A5 and S6, the main catalog contains categories:

  • Telephony;
  • Connectivity;
  • HW Testing.
  • answering machine;
  • GSM frequencies;
  • connection standards 2G, 3G, LTE;
  • access to the worldwide network and other parameters related to telephony.

Connectivity defines the parameters of wireless connections: Wi-Fi, Bluetooth, radio. Changes made in this section can disrupt the operation of the device or completely disable it.

HW Testing is designed to test hardware components. processor, battery, speaker system, optics, touch panels and the like.

For example, the service menu helps on a Samsung phone to reduce the stress on the battery. You need to go to hidden Android settings and:

  • open Telephony;
  • enter BandMode, where you can specify the scanned GSM frequencies;
  • uncheck the boxes everywhere, except for 900 and 1800, which correspond to Russian standards;
  • confirm action by touching SET.

As a result, the autonomous module will stop looking for formats that are not available in the country, which will significantly increase the battery life.

How to Enter Samsung Service Menu (Engineering Mode)

The engineering menu on Samsung telephones is activated after dialing special combinations. To make them work, sometimes, having indicated the desired cipher on the dial pad of the telephone number, they press the call button.

How to enter the secret engineering menu on Samsung. you need to type one of the combinations:

  • # for newer devices;
  • ###, # or ### for earlier generations.
  • for Samsung J7 and J1, cipher ## is relevant;
  • versions A5, S5 and S6 respond to ### or ###;
  • for Samsung A3 it is better to use ###;
  • if it is S3, then dial ###;
  • S7 Edge owners should try ### or ###.

Another way to enter the engineering (hidden) menu on Samsung yourself is to install special utilities Mobileuncle Tools, Mobileuncle MTK Tools 2.4.0, EngineerMode, Shortcut Master and others. They are distributed via Google Play.

How to use the engineering menu

The engineering menu on Samsung telephones in the initial version provides full diagnostics and comprehensive settings for smartphones. But later, even during the development period, its capabilities are sharply reduced. As a result, the option only opens access to data on some hardware components and allows you to perform basic testing.

How to enter the engineering menu on Samsung

Engineering menu on Samsung. a directory containing various commands for controlling the device, individually debugging its parameters, testing the device.

If you managed to open the service menu of your Samsung phone without any problems, work in it very carefully. Perhaps it makes sense to commit the changes made so that later you can undo them.

Since you can enter the engineering (technical) menu on Samsung using various commands, taking into account the specifics of a particular model, if the proposed schemes turned out to be ineffective, contact the manufacturer’s service center.

How to get into the service menu of Samsung TV 6

  • Take the remote control and press the following sequence: info. menu. mute. power;
  • Having learned how to enter the service, you need to wait a couple of seconds, since the TV will restart after pressing the specified combination to display the necessary information;
  • After that, the incoming person must learn to move in such a way that they do not accidentally change the settings. If you need to change something, you must press “Enter” and only then enter the amendments;
  • Go to “Control”, “Cloning” and so on;

It is important, before finishing the work in the “Hotel Option” section, to mark “OFF” in order to save some functions from failures. And also, since the user has entered the menu, and knows how to enter here at any time, you still need to understand how to exit and not damage the settings. This is done in this way:

How To Open Secret Service Menu On Samsung TV | All Samsung TV Service Menu Access Codes | SAMSUNG

  • You can exit by turning off the TV normally;
  • Then go back to MENU-SYSTEM, and see what has changed;
  • If all is well, we entered without any problems and I am satisfied with the settings, which means that you can continue to use the TV with an updated menu.

Service mode Samsung TV UE43KU6000, as on

How to enter the service menu on Samsung UE43KU6000 TV?

If you want to enter the service menu on your Samsung UE43KU6000 TV, you can try one of the methods listed below.

Third method:

  • At the very beginning, turn off the TV. To do this, press the power off button on the remote control.
  • Now press the sequence of buttons on the remote control: Display, P.std, Mute, Power.
  • Now the TV turns on, and the service menu should appear on the screen.
  • Use the ARROW button to navigate the menu and the OK button to confirm your selection.

Fifth method:

  • First turn off the TV by pressing the power button on the remote.
  • Then press Display, Menu, Mute, Power on the remote.
  • The TV turns on, and the service menu should appear on the screen.
  • Use the ARROW button to navigate the menu and the OK button to confirm your selection.

Samsung TV Service Menu Codes

First use this code to open Samsung LCD TV service mode:

Put the TV into standby, then press the mute button and then enter 1,1,9 in sequence (119 mute)

If you haven’t opened service mode yet, try these codes one by one.

Second method:

  • Turn off the TV by pressing the power button on the remote.
  • Then press the buttons on the remote in the following order: Mute, 1, 8, 2 and Power.
  • Now the TV turns on, and the service menu should appear on the screen.
  • Use the ARROW button to navigate the menu and the OK button to confirm your selection.

What can be changed or tested in the service menu

Using the service menu, you can change the settings and operating modes of the TV, as well as test the TV components. You can use the service to do the following.

How to enter the TV service menu

To enter the service menu, you must have a standard TV remote control (below is a photo of a standard remote control). The standard remote has more control buttons, some buttons are used to enter the service menu. Smart remote control for entering the service menu is not suitable.

Samsung standard TV remote control

Warning: work carefully with the service menu. Incorrect operations may result in the TV being unable to turn on. By entering the service menu, you fully take responsibility for the further operation of the TV under your own responsibility.

I changed the settings in the service menu, the TV does not turn on, what to do

Quite a common situation, a service menu for specialists who understand what they are doing. If you choose the wrong settings, it may well happen that the TV has stopped turning on. If you have a situation that occurs when you change the TV settings;

  • when turned on, the TV is constantly overloaded
  • the Samsung logo appears, and then a black screen
  • the power-on LED blinks several times, and then turns off, the TV does not work.

We will try to explain why this is happening. And practically nothing can be done on your own, since the problem is at the level of the operating system. The correct solution is to restore the operating system in a service center.

A TV is a smartphone with a certain modification of the operating system. OC must be written to the memory of the permanent memory chip and when the TV is turned on, the operating system will be read and loaded.

So OC is the same for all TVs, but the settings can be drastically different. For example, the screen type may be set in the settings; if this setting is changed, the TV may not work. If the wrong parameter is set in the settings, then when loading, OC freezes or an endless restart occurs.

Features of the Samsung TV service menu

The TV service menu opens up new possibilities for your TV. The manufacturer does not write an operating system for a specific model. OC is the same for all TVs, but the settings differ depending on which TV a specific version of the operating system will be installed on. And knowing how to change the settings, you can, for example, turn a 7 series TV into an 8 series TV.

Samsung TV service menu view

Depending on the manufacturer of the TV’s main board and region, there are several options for entering the Samsung TV service menu. For example, option number one is suitable for TVs made in Europe, option number two is suitable for TVs manufactured for the USA, Canada, Mexico. All manipulations to enter the menu must be performed with the TV turned off (in standby mode). Ending a call to the service menu always pressing the Power button (turn on / off the TV).

What can you learn from the service menu about the TV

  • TV production date with details up to a specific day.
  • TV model
  • The version of your TV, this information is needed for repair, you can determine the supplier of components for assembling the TV.
  • Base TV model
  • Digital tuner manufacturer
  • Wall mount format
  • WI-FI region
  • How long the screen panel worked (the TV worked in hours from the moment it was first turned on)
  • Year of development of the original version of the TV
  • Port standards
  • and a lot of other information that a specialist needs when diagnosing a TV.

Method 5 of entering the service menu

When the TV is in standby mode, press DISPLAY, MENU, MUTE, POWER on the remote control.

Service menu of TVs SABA, SONY, Samsung, SALORA, etc.

SABA Models: 52RW64E, 44W65ES, 52RW65ES, 52RW77WS
Turn on the TV while holding the (PROG-) and (VOL-) buttons

SABA Processor ST9093. Chassis. ICC9.
Turn on the TV while holding the blue button on the remote. Hold for 5 sec. Exit. POWER OFF

SABA Processor ST90R91 Chassis. ICC10
Turn on the TV while holding the blue button on the remote for 5 seconds.
Turn on the TV while holding the (PROG-) and (VOL-) buttons. Hold buttons for 8 sec.
Exit the menu. POWER OFF

SALORA 6390, 7190, MV4000, PL14, 24101.852 SAT SOLI, 882 SAT SOLI, 885 SAT SOLI processor CCU-SALO-07 (CCU20XX), chassis M1
(C) (O / V) (#) (M) Exit. (!)

SALORA 5575SFN, 28T7, ST92T93 processor, STEREO PLUS chassis
(i) (M) (P)
Exit. (TV)

SALORA DIGIVISION 63.2, 71.2, 2.N6 processor NES3-… NES2-. chassis EUROSTE REO-1
(- /) (MENU) (TV). for 1 sec.

SALORA Processors TVPO2065-DO1, TVPO2066-A24
Close contacts 15 and 23 of SAA1250 in the remote control or close contacts 14 and 19 of SAA1250 in the remote control. If you did not immediately enter the menu, then you need to additionally close contacts 11 and 21 of SAA1250 in the remote control.
Exit. (AV)

Samsung, (monoblock) CHASSIS: SCV11A, B Model TVP3350, TVP5050, TVP5350
Input: StandBy.- P.Std.- Menu.- Sleep.- Power On
After entering the service mode, a menu appears on the screen: Adjustment, Option byte, Reset.
Abbreviations used in Adjustment mode: AGC. Auto Gain Control, SBT. Sub Bright, SCT. Sub Contrast, SCR. Sub Color, STT. Sub Tint, PDL. Pal Delay, NDL. NTSC Delay, RC. Red Cutoff, GC. Green, Cutoff, BC. Blue Cutoff, RG. Red-Green drive gain, BG. Blue-Green drive gain, PSL. PAL vertical SLope, PVS. PAL Vertical Shift, PVA. PAL Vertical Amplitude, PHS. PAL Horizontal Shift, NSL. NTSC vertical SLope, NVS. NTSC Vertical Shift, NVA. NTSC Vertical Amplitude, NHS. NTSC Horizontal Shift.

Samsung CS7272 PTR \ BWX CHASSIS SCT 51A
Entering the menu allows the following sequence of commands: PICTURE OFF.- SLEEP.- P.STD.- MUTE.- PICTURE ON.

Samsung CK6202 CK7202 CHASSIS SCT12B Press the following sequence of buttons on the remote: STAND-BY.- P.STD.- HELP.- SLEEP.- POWER ON.
Exit HIDDEN or STATUS key.

Samsung CS-721, CS-723 CHASSIS SCT-52A
Press the buttons on the remote control one by one PICTURE OFF.- SLEEP.- P.STD.- MUTE.- PICTURE ON. Move the cursor of the CHANNEL and VOLUME keys.

Samsung CK 6271 WP
To enter the service menu, 1. Press the (HIDDEN) button. hidden on the remote 2. Press the afterbirth very quickly. (stand-by) 3. (p.std) 4. (help) 5. (sleep) 6. (power-on)

Samsung CS 2139TR, CS21A0QWT, CK-564BVR, CZ-21H12T, CS-25M6HNQ, CS-21S4WR, CS-21S1S, CS-21D9 chassis KS1A
(STAND-BY) (DISPLAY) (MENU) (MUTE) (POWER ON)

Samsung CS-29A6HTR PLANO
(STAND BY) (DISPLAY) (P.STD) (MUTE) (POWER ON)

SANYO C21ML1 (MG) processor: VESTEL 19V1.0NT
Login to the service. Press MENU (INSTALL), put the cursor on the line “Settings”.
Then press sequentially 4 = 7 = 2 = 5

SONOLOR Models: 5552, 6352, 6363, 6372, 6383, 7163, 7172, 7183, 63SN601. Processor NES3AR01 / 02, NES2-2R01 / 4R01
Input: (- /) (MENU) (TV). press the whole combination in 1 second.

SONY KV-С2171K, KV-C2171KR, KV-X2101K, KV-X2501K, KV-X2581K, KV-X2581KR, KV-M2540K, KV-M2541K, KV-X2901K, KV-X2981K, KV-BE-X2981KR
In standby mode, for no more than 20 seconds on the RM833 remote control, the following buttons are pressed: (Display on screen) (5) (VOL) (TV). In the upper right corner will appear the inscription TT.
The site master-TV.com has a detailed description of the setting.

SONY KV-M1440, KV-M2170, KV-M2171, KV-M2181, KV-M2101
Set the TV to standby. Then you need to press the buttons from the remote control in the ON SCREEN DISPLAY 5.-VOLUME.-TV sequence. The data is given for a control panel type RM-836.

SONY KV-24WS1A / B / D / E / K / R / U CHASSIS BE-3B CXP85340A-116Q / 117Q RM-837
Set the TV to standby. Next, you need to press the buttons from the remote control in the sequence ON SCREEN DISPLAY 5.-VOLUME.-TV.

SONY KV-24WS2A / B / D / E / K / R / U CHASSIS BE-3D MSP3410B-PS-F7-T, MSP3410C-PS-C6-T RM-862
Set the TV to standby. Next, you need to press the buttons from the remote control in the sequence ON SCREEN DISPLAY 5.-VOLUME.-TV.

SONY KV25C1 / A / D / B / E / R / K, KV29C1 / A / B / D / C / K / R / E / D1 CHASSIS BE-3D RM-839
Set the TV to standby. Next, you need to press the buttons from the remote control in the sequence ON SCREEN DISPLAY 5.-VOLUME.-TV.

SONY KV-2170, KV2180, KV2540 CHASSIS BE4
Set the TV to standby mode, and press the buttons on the remote control in the following sequence ON SCREEN DISPLAY.- 5.- VOLUME.- TV.
Gate 00.

SONY KV2181KR SHASSIS BE-4
Set the TV to standby. Then you need to press the buttons from the remote control in the ON SCREEN DISPLAY 5.-VOLUME.-TV sequence. The data is given for a control panel type RM-836.

SONY KV-E2551A \ B \ E \ K, KV-S29 JN1 \ MN1 \ SN1, KV-S34 JN1 \ MN1 \ SN1 CHASSIS AE-2B
Use a remote control type RM-831. Turn on the power of the TV while pressing any 2 buttons on the front of the TV.

SONY KR-S4613 SHASSIS AP-2
Use a remote controller like RM-832. Turn on the power of the TV while pressing any 2 buttons on the front of the TV.

SONY KV-B2911 / A / D / B / K, KV-B2912V, KV-B2913E CHASSIS AE-2
Use a remote control type RM-830. Turn on the TV power while pressing any 2 buttons on the front of the TV. The TT message appears in the upper right corner of the screen. Then press the MENU button. The error can be determined by the number of flashes of the LED located on the front of the TV. The so-called self-diagnosis process.

SONY KV-T25MF1
Set the TV to standby mode Then, from the remote control enter the following sequence of commands DISPLAY.- 5.- VOLUME.-POWER. The sequence of operations in SERVIS mode is as follows. 1–4 move through position numbers, 3–6 increase and decrease values, MUTING to write, 0 to execute the record. Remote control RM-870 is used

SONY KV-M2540
Set the TV to standby mode, and press the buttons on the remote control in the following sequence ON SCREEN DISPLAY.- 5.- VOLUME.- TV. Applied remote control model RM-833

SONY KV-S29 RN1 \ 34RN1 SHASSIS G1
Entering the service mode is performed using the RM-821 remote control. Turn the TV on standby. Then press the following combination of buttons on the remote control: DISPLAY.- 5.- VOL.- POWER

SONY KV-S2941A \ B \ D \ K, KV-S2942U, KV-S2943E SHASSIS AE-2F RM-831
Turn on the power of the TV, and then press the ON button on the remote twice. TT appears in the upper right corner, then press the MENU button.

SONY KV-B2911 / A / D / B / K, KV-B2912V, KV-B2913E CHASSIS AE-2
Use a remote control type RM-830. Turn on the TV power while pressing any 2 buttons on the front of the TV. The TT message appears in the upper right corner of the screen. Then press the MENU button. The error can be determined by the number of flashes of the LED located on the front of the TV. The so-called self-diagnosis process.

SONY KV-29X1A \ B \ D \ E \ K \ L \ R \ U CHASSIS BE-3D
Set the TV to standby mode, and press the buttons on the remote control in the following sequence ON SCREEN DISPLAY.- 5.- VOLUME.- TV. Applied remote control model RM-839.

Low signal level M3L TXD and RXD

AV switch does not reset when power is turned on

NVM response corrupted after initialization

Incorrect operating time of Compact Text

AV switch response corrupted after response

JUNGLE / CHROMA controller response corrupted after response

SONY KV-29X1A \ B \ D \ E \ K \ L \ R \ U CHASSIS BE-5
Set the TV to standby mode, and press the buttons on the remote control in the following sequence ON SCREEN DISPLAY.- 5.- VOLUME.- TV. Applied remote control model RM-836.

SONY KV-S2951 KR CHASSIS AE-3
Use a remote control type RM-831. Turn on the power of the TV while pressing the buttons. and on the front of the TV.

CXD2032R digital sampling converter error

CXD2035R view transducer error

SONY KV-16WT1 A \ K \ R \ U
Set the TV to standby mode, and press the buttons on the remote control in the following sequence ON SCREEN DISPLAY.- 5.- VOLUME.- TV. Applied remote control model RM-836.

SONY KV-C2173 B / E, KV-C2171 D / K / KR CHASSIS BE-3B:
Set the TV to standby mode, and press the buttons on the remote control in the following sequence ON SCREEN DISPLAY.- 5.- VOLUME.- TV. Applied remote control model RM-833.

SONY KV-2501 A / D / K, KV-C2503 B / E, KV-C2508 D / E, KV-C2509 B / D / E / K.
Set the TV to standby mode, and press the buttons on the remote control in the following sequence ON SCREEN DISPLAY.- 5.- VOLUME.- TV. Applied remote control model RM-833.

SONY KV-G21M1 \ G21P1 \ G21S11, KV-T21M1 \ T21MF1 \ T21MN1 \ T21MN11
Service exit method: press the POWER button 2 times. Memory recording method: Enter the service press the combination of buttons on the remote control 1 (UP) 4 (DOWN) select the adjustable parameters. Press the MUTE key to call up the WRITE display (green) press the 0 key to enter into memory.

SONY KV-21T10R
Set the TV to standby mode, and press the buttons on the remote control in the following sequence ON SCREEN DISPLAY.- 5.- VOLUME.- TV.

SONY KV-21C4B / D / E / K / R KV-21X4A / B / D / E / K / L / R / U CHASSIS BE-5 processor SDA5255-A024. Remote RM-836.
Set the TV to standby mode, and press the buttons on the remote control in the following sequence ON SCREEN DISPLAY.- 5.- VOLUME.- TV.

Jungle Controller IC Does Not Confirm I2C High Level Transmission

Jungle Controller IC ERROR flags

No horizontal retrace signal

Sound processor does not acknowledge I2C high-level transmission

NVM non-volatile memory does not acknowledge I2C low level transmission

The tuner does not acknowledge the transmission of a high level on the I2C bus

Protection input: X-ray protection (X-ray).

SONY KV29F3A / B / D / E / K / R / U CHASSIC BE-3D Processor SDA302C263-GEG Remote RM-862
Set the TV to standby mode, and press the buttons on the remote control in the following sequence ON SCREEN DISPLAY.- 5.- VOLUME.- TV.

Low signal level M3L TXD and RXD

AV switch does not reset when power is turned on

NVM response corrupted after initialization

Incorrect operating time of Compact Text

AV switch response corrupted after response

JUNGLE / CHROMA controller response corrupted after response

SHARP 14 \ 21 JN1 CHASSIS SP-51
When the input 37 of the microcontroller for 3 adjacent periods is in the high-level state, the service menu is called.

SHARP VT-1428M, VT-2128M
Set the TV to standby mode, and press the buttons on the remote control in the following sequence CH UP for 2 or more seconds and press the POWER button at the same time. Exit the menu by pressing the MENU button.

SHARP 54AT-15SC
To enter the service, you must press in sequence the following buttons from the remote control. POWER OFF then simultaneously VOL- and CH on the TV panel. Then POWER ON and hold VOL- and CH until the TV starts.

SHARP 14D-SC, 14B-SC, 20B-SC, 14D-CM, 21D-CK1, CV-2132CK1 CHASSIS PAL-A.
Set the switch S1008 to the position of the servo mode.

SHARP 14R-SC / M8 / M10, 14R-W, CV-14RU
Set the switch S1006 to the position of the servo mode.

SHARP DV-5450SC CHASSIS S3B processor IX1492BM, SDA-20561
To enter the service mode, it is necessary to connect terminals (2) and (6) on the VIDEO unit. Then press the MODE button on the remote control. The message.SERV- appears. Then remove the jumper. CH and CH adjustment selection.

SHIVAKI CHASSIS 11AK19
To enter the service mode, you need to do the following manipulations. First enter the installation menu with the INSTALL key, then press the keys on the remote control in the following sequence 4, 7, 2 and 5. Find the ADJUST item in the menu (all adjustments change through it).

SHIVAKI STV1415 CHASSIS 11AK20
To enter the service menu, you must complete the login procedure within 4 seconds. It is necessary to press the following keys from the remote control in sequence. (VOL-), (Prog), (.-), (TV). The parameters are selected with the (PROGRAM UP) (PROGRAM DOWN) buttons, and change (VOL-), (VOL). To memorize, press the red button. Use the TV button to exit.

READ  How to open a Redmi 8 phone
BYRGPUB.COM 2021