70mai Dash Cam Pro.

70mai Dash Cam Pro. It is a car recorder offering many functions to improve driving safety.

Main characteristics:
Parking surveillance
Advanced Driver Assistance System
Excellent day and night vision
APP support, easy to play and download
Compact design
3 minute installation
voice control

WDR: Adjust the exposure balance so the camera can get more detailed information, allowing the dashboard to process more light on the Center and create a brighter image.

Defog ALGorithm: (Defogging ALGorithm) effectively reduces distortion or degradation of images and reproduces clear vision while driving in smoke and haze conditions.

G-Sensor: 70mai Dash Pro automatically starts recording when a collision is detected. Frames locked in the event file are separated from the regular file.

140 Wide angle: Allows you to record a wider angle of view and allow DRIVERS to see 4 lanes. Along with 6 glasses, it can provide light transmission, thus record crystal clear signal.

2592 x 1944 pixels HD: 2.5 times 1080P HD resolution, produce travel movies anytime, anywhere, capture the details of your routes, never miss any wonder when traveling.

6-Glass Lens: 6-layer glass lenses allow 70mai Dash Cam Pro to prevent blur in multIPle climates and conditions along with Defog effect.

APP Enabled: connected to the device’s hotspot, you can easily access the Internet, view and download images while traveling without using mobile traffic.

SONY IMX335, F / 1.8: SONY IMX335. It is a type of image sensor widely used in cameras for its ability to capture crisp, high resolution images and footage even in low light conditions.

Instructions

Product overview

Installation
Please install the product following the method below.

1. Install the electrostatic sticker
Take out the electrostatic sticker from the shIPping box and place it in the recommended area on the windshield as shown in the picture below. Please clean the windshield and remove any air bubbles between the electrostatic sticker and the windshield during installation.

2. Connect 70mai Dash Cam Pro to the bracket
Attach the bracket to the 70mai Dash Cam Pro as shown in the picture below. You will hear a click when it is in place.

3. Attach Dash Cam Pro
Peel off the protective sticker on the bracket of the 70mai Dash Cam Pro and attach the dash cam to the center of the Electrostatic sticker as shown in the picture below. Press the bracket by hand to make sure the heat-resistant adhesive is in close contact with the electrostatic sticker.

4. Connect the power supply
As shown in the illustration, run the power cable along the top of the windshield, the C-pillar, and around the passenger glove box. Position the end so that it goes to the cigarette lighter port. After connecting to the car charger, plug the charger into the port

5. Adjust the angle of Dash Cam Pro
Turn on Dash Cam Pro and adjust the camera angle up and down against the GoPro preview screen to make sure the camera is facing the front.

70mai Smart Dash Cam Pro Activation

70mai Smart Dash Cam Pro needs to be activated with 70mai app. Visit the website below to download and install the 70mai app.

Select Add device in 70mai app and complete the activation as requested.

Specifications
Image sensor: SONY IMX335
Resolution: 2592 × 1944
Camera FOV 140, F1.8, 6 pcs.
Wireless connection: Wi-Fi IEEE 802.11 b / g / n / 2.4ghz
G-sensor: acceleration sensor
Expandable memory: MicroSD card with a capacity of 16-64GB and read / write speed Class10 and above
Supported OS: Android4.4 / iOS8.0 and above
Power supply: car cigarette lighter
Battery type: lithium polymer battery
Battery capacity: 500mA
Input: 5V 2A
Working temperature: 10 C

70mai Dash Cam.

Xiaomi 70mai Dash Cam Smart Wi-Fi Smart Dash Cam Car Recorder with Built-in Wi-Fi. International version

Smart, simple and secure

Provide reliable information about road accidents.
Help with insured events.
Shot of a roadside landscape.

70mai Dash Cam
Precise voice control
Automatic Emergency Recording
night vision
Application management
reproduction
Easy installation

Voice control. Hands-free teams, driving with safety

Application control. Built-in Wi-Fi, free traffic

Mini design. Obstacle free, full view

Installation in 3 minutes. The easiest way to install

Wide viewing angle 130
built-in AI
Adjustable lens angle
1080 Full HD
High sensitivity sensor
Clear night vision

Storage

TF card requirement

Registrar Xiaomi 70mai Dash Cam Supports standard TF card from 16GB to 64GB and class 10 speed or higher. Before implementation, please make sure you format the TF card inside the DVR.

All are overwritten, starting with the old ones, when the GoPro disk space limit is reached. Be sure to back up your footage to your phone or computer in case of an accident.

TF cards can be damaged during continuous recording and cleaning. In this case, replace the TF card if it doesn’t work.

Make sure you are using high quality TF cards from a reputable brand. Actual write speed and capacity of low quality TF cards may be lower than stated. Usually NOT saved on low quality TF cards. We do NOT accept any responsibility for such cases.

Please format it inside the DVR before inserting the new TF card. We strongly recommend that you format your TF card once every 2 weeks; otherwise, your TF card may get too slow.

Do NOT insert or remove the TF card when your dash cam is working.

TF card exceptions

If the dash cam stops recording due to TF card exception, the indicator light is red.
The following exception states can be:

TF card capacity is less than 8GB;
TF card class less than 4;
Old TF card;
TF card has become slow in write speed;
TF Card not recognized;
There are files that are NOT generated by the device;
TF card format is wrong.

READ  Xiaomi 70mai Dash Cam DVR Installation

Source of power

Your DVR receives electricity from the cigarette lighter socket. Use the original power cord and adapter to maintain a stable input power source. We are NOT responsible for any loss or damage caused by the introduction of a second power source other than the cigarette lighter socket, or the use of non-original power cables and adapters.

Some cars still supply power to the cigarette lighter outlet after the engine is turned off. To avoid draining your car’s battery, press and hold the power button to turn off the camera, or remove the adapter from the cigarette lighter socket. Remember to turn on the camera when you start your next ride. We are NOT responsible for any loss or damage caused by disconnecting the camera when leaving the vehicle.

Indicator

A ring indicator is located on the outer edge of the power key. The indicator has the following states:

Off state
When the device is off, the indicator is also off.

Saving state
When the device is turned on, the indicator turns on. While the device is in a different mode, the color of the indicator differs as follows:

Green : Usually recording;
blue : Not in recording mode;
red : Write error.

Indicator state
When the indicator is on, regardless of its color, the Wi-Fi hotspot opens; if the indicator is in a color-changing state (slowly alternating between light and dark), the Wi-Fi hotspot closes if the indicator stays on. ,

Recording

Common
Duration: 1 minute
Recording mode: loop recording

Events
Duration: 30 seconds before current.
Recording mode: loop recording.

A photo
Photo memory capacity: up to 300 photos.
If your photo storage is used up, you need to manually delete old photos to free up space.

Installation

1. Electrostatic sticker
Clean your windshield and place the electrostatic sticker on the recommended area as shown in the picture below. Make sure you remove any air bubbles between the sticker and the glass.

2. Attach the camera mount to the windshield.
Remove the protective cover from the mount and adhere the mount base to the center of the electrostatic sticker. Make sure your cam body is parallel to the ground.

Press down on the mount to firmly attach it to the electrostatic sticker.

3. Connect the USB cable to the cigarette lighter socket.
Align the cable with the top edge of the windshield and secure it along the passenger side and glove box as shown below. Connect the cable to the power adapter and insert the adapter into the cigarette lighter socket.

The cigarette lighter socket can be positioned differently in your car. Picture provided for reference only.

Voice control

70mai Dash Cam supports voice control. When the recorder is working, you can control it with the following voice commands:

Take a picture : Take a photo.
Recording : Record the emergency clIP and save it separately in the event folder.
Recording without sound : Stop recording audio, record without audio.
Recording with sound : Start recording sound including sound inside the car.
Disable Wi-Fi : Disable the dash cam Wi-Fi hotspot.
Turn on Wi-Fi : Enable Wi-Fi hotspot.

In the following situation, voice control does not work:

70mai Dash Cam app access the device;
indicator flashes.

Application functions

1. List of devices
If you have NOT added a DVR, the device list is empty. Click the Add New button or the icon on the right side of the header to add a new registrar.
If you have added a recorder, Click on the device image to go to the recorder plugin page.
If there are several DVRs in the device list, you can select another device by clicking on the device image.

2. Check for firmware update.
If new firmware is available, a red dot appears on the Firmware Update button at the bottom of the home page.
Click on Firmware Update to check the firmware update. If there is new firmware, click Download to download the update package to your mobile phone. When the update package is downloaded, you need to go to the registrar module page to send the package to your device.
If your device has been updated to the latest version, you can remove the update package by clicking the delete icon on the header of the firmware update page.

Before entering the plugins page, you must connect your mobile phone to the registrar’s Wi-Fi hotspot. When you leave the plugin page, the connection will be automatically disconnected.

1. Preview
Get live preview from the recorder. You can switch to full size preview by clicking on the enlarge icon in the lower right corner of the GoPro preview.

2. Take a photo
Click the take a photo button to take a photo. When you hear the shutter sound and voice prompt Photo has been saved, the photo has been taken and saved in both the albums of the recorder and the mobile phone.

3. View the recorder album.
On the registrar plugin page, click the Album icon to enter the device album. You can find and photos saved on the TF card.
There are three subfolders in the device album:

Normal
event
a photo

You can play or upload and photo when entering a specific list.

5. Push update package.
If you downloaded the latest firmware, go to the plugin page and click the Push Update icon to transfer the update package to the DVR.
If there are no update packages available, the Push update icon is disabled.
When the DVR receives the upgrade package, the indicator shows blue blinking and the recording stops.

PERSONAL CENTER

On the main page of the application, click the User icon at the top left to enter the personal center

1. Change profile
In the personal center, you can change your avatar, nickname, name and gender.

2. Control your devices.
You can also manage your devices here.
You can add a new device as well as delete an existing device.

Xiaomi 70mai Smart Dash Cam Pro (Rus)

70mai Smart Dash Cam Pro recorder. FlagshIP registrar from Xiaomi. The car recorder features high quality, 2592×1944 pixels, Android and iOS support, wide angle lens and DeFog function. 70mai Smart Dash Cam Pro was liked by buyers and is a TOP selling.

Xiaomi 70mai Smart Dash Cam Pro (Russian version)

Xiaomi 70mai Dash Cam Pro is a dash cam from Xiaomi (“70mai”) ​​and is an update to the popular version of the 70mai Dash Cam. The car dash cam has many functions, such as a Super HD circuit diagram, DefFog function, Sony IMX335 glass lens.

Quality

Huawei HiSilicon allows you to shoot with a resolution of 2592 x 1944 pixels, support for a wide dynamic range system, using a 5 megapixel camera with a Sony IMX335 sensor and an aperture of f / 1.8. The combination of THESE elements makes the picture really very high quality, it is clear and detailed. The capture takes place at an angle of 140 degrees, this will help you see two lanes of the road, as well as the license plate of cars, pedestrians.

READ  Rear view camera for Passat B5 installation

Safety

Xiaomi 70mai Smart Dash Cam Pro gives you a high level of security. During parking, the recorder monitors what is happening around the car. A shock sensor and parking monitoring will help you record what is happening at the right time. When the object is approaching, the car recorder will automatically start recording.

Connectors

The Xiaomi 70mai registrar will be able to record on a micro SD memory card up to 64 GB. The USB output will be able to connect to a personal computer or charger. In the upper part of the car recorder it is possible to connect a GPS module.

De Fog

When the weather conditions deteriorate, the De Fog function will improve the shooting. The modern aLGorithm will improve the picture, make it more pleasant and detailed. Therefore, using 70mai Smart Dash Cam Pro makes it safer during snowfall, fog, cloudy time of day.

GPS module

An additional GPS module allows you to activate the ADAS (Advanced driver-assistance system) function. It will warn you of blind spots, objects that are rapidly approaching, an emergency. Optional GPSGPRS module helps you configure and manage your DVR.

Specifications:

Capture 140 degrees

Processor: 2-core Huawei HiSilicon, Hi3556V100

Shooting size: 2592×1944 pixels, H.265 codec, 19.2 Mbps, 30 frames / sec

Lens: 6-layer glass Sony IMX335, 5 MP, aperture range: F1.8

System of additional modules: GPS and GPSGPRS (not included in the basic set), to activate the ADAS system

Wireless connection: Wi-Fi, 2.4ghz

Voice control: in Russian or English

Improvement system: DeFog (“anti-fog”) AND WDR (wide dynamic range)

Sensor: G-sensor (shock sensor)

Monitoring mode: parking mode

Battery 500mAh Li-Ion Battery

Support for memory cards: micro SD up to 64 GB (class 10)

Connectors: micro USB, charging 5V 2A (cable length 3.5 meters)

Dimensions (LxWxH): 87.5 mm x 53.0 mm x 18.20 mm

Power button

70mai has only one button. the power button.

To turn on the recorder, press the power button.

When the recorder is on, click the power button to turn on or off the Wi-Fi hotspot.

To turn off the recorder, press and hold the power button.

Press the power button three times to format the micro SD card.

Press the power button five times to reset the device to factory settings.

Contents of delivery

Registrar Xiaomi 70 Mai setup guide

Setting up the Xiaomi 70 mai dash cam car recorder.

Automotive recorder elements

Installing the Xiaomi 70 mai registrar

Clean your windshield and stick the sticker to the recommended area shown in the picture. In this case, it is necessary to remove bubbles between the glass and the sticker.

2. Attaching the bracket to the windshield.

Remove the protective film from the sticker and stick the bracket firmly pressed against the center of the sticker. It should be borne in mind that the body of the recorder must be parallel to the ground.

3. Connecting the USB cable to the cigarette lighter.

Route the cable along the top edge of the windshield and lower it down from the passenger side as shown.

Connect the cable to the power supply and plug the power supply into the cigarette lighter.

Recorder indicator 70mai

The indicator is shaped like a ring and is located around the power button.

The indicator has the following modes:

1. The indicator is off when the recorder is off.

2. When the device is turned on, the indicator lights up in the following colors:

  • Green: normal recording
  • Blue: non-recording mode
  • Red: write error

3. Smoothly flashing mode. When the Wi-Fi access point is on, the indicator is in a state of smooth flashing regardless of its color.

4. Flashing Mode:

  • Green Flashing: emergency recording
  • Blue Flashing: Format memory card, restore factory settings, receive upgrade package, update firmware, wait for connection confirmation.
  • Red Flashing: Low battery.

Voice control

70mai dash cam supports voice control.

When the recorder is on, you can control the following functions by voice:

  • Take picture: Take a picture
  • Record: Record the emergency and save it to a separate folder
  • Record without sound: Turn off sound recording
  • Record with sound: Enable sound recording
  • Turn off Wi-Fi: turn off Wi-Fi hotspot
  • Turn on Wi-Fi: Turn on Wi-Fi hotspot

Voice functions do not work when the device is being accessed or when the indicator is flashing.

70 mai dash cam car dash cam firmware update

Click the Firmware update button at the bottom of the application start page to check for new firmware.

If there is a new firmware version, click Download to download the update package for the recorder to your phone.

Next, you need to connect to the Wi-Fi access point of the registrar, as described above, and open the registrar view page in the application.

Now press the Push update button to update the firmware. During the update, the DVR indicator will be flashing blue.

Turning on the 70 mai dash cam for the first time

When you turn on the recorder for the first time, you will hear the voice message 70mai boots up, please activate the device by connecting to your cell phone. At the same time, the flashing blue indicator will light up.

If the indicator is solid blue, press the power button once to turn on the Wi-Fi hotspot.

To connect to the recorder from your phone, install the 70mai app on your phone. The app can be found in the Play Market and App Store

The first time you launch the application, you need to register. To do this, click Sing up.

A user agreement window will open in front of you, which must be confirmed by clicking the Agree button.

Next, enter your email address and click Get security code. A secret code will be sent to your suite. After receiving the secret code, enter it in the application. Then enter any password, repeat the password and click Submit to complete the registration.

Now you need to click the Add device button to add the recorder to the application. In this case, the Wi-Fi access point on the camera must be turned on, as described earlier.

Next, select 70mai Smart Dash Cam

Make sure that the Wi-Fi access point of the registrar is turned on (smoothly flashing blue indicator) and click Next (Next).

READ  Rear View Camera For Passat B7

Now you need to connect your phone to a Wi-Fi access point, which has a name in the format 70mai_d01_xxxx. When connecting, enter the password 12345678. After connecting to the Wi-Fi point, return to the application and click Connect.

Click Device settings to configure the DVR.

The following settings window will open

Also, using the application, you can update the firmware of the device, view the broadcast from the recorder in real time, take pictures

3-inch HD display. 4K resolution

The Xiaomi 70mai A800 4K Dash Cam is based on a powerful Sony IMX 415 CMOS image sensor, which allows you to shoot excellent day and night. in 4K (3840×2160) format. The quality of the shooting is so clear that even the smallest details will be visible. In any weather, on any terrain, even in low light, the image will always be saturated and bright.

FCW collision warning system. LDW lane departure warning system

Lane Departure Warning (LDW) uses the 70mai A800’s camera to monitor the lane markings to make sure the vehicle remains safe in the lane. In case you get distracted and start drifting, the LDW system produces a beep to alert you.

DVR 70mai Dash Cam Installation

Super Night Vision with 3D DN

The 70mai A800 delivers bright and clear images even in low light conditions, using 3D DNR (Dynamic Noise Reduction) technology, F / 1.8 aperture lens and intelligent aLGorithm, which greatly reduces image noise and automatically adjusts exposure balance. The result is enhanced night vision with greater detail.

Xiaomi 70mai A800 4K Dash Cam

  • 4K resolution
  • G-sensor, GPS module
  • 140 viewing angle
  • Easy installation system

The new 70mai car recorder consists of two cameras: a front camera with a built-in 3-inch display, which is mounted under the windshield, and a rear one for installation on the rear window, which allows simultaneous recording in opposite directions. Perfectly shoots day and night, thanks to high-aperture optics, Sony IMX 415 sensor with 4K resolution. EquIPped with such functions as: ADAS DRIVER ASSISTANCE system, GPS module, G-sensor, collision warning and lane departure system.

1990 Ub. 8990 g. Ub.

Xiaomi 70mai A800 4K Dash Cam

The new 70mai car recorder consists of two cameras: a front camera with a built-in 3-inch display, which is mounted under the windshield, and a rear one for installation on the rear window, which allows simultaneous recording in opposite directions. Perfectly shoots day and night, thanks to high-aperture optics, Sony IMX 415 sensor with 4K resolution. EquIPped with such functions as: ADAS DRIVER ASSISTANCE system, GPS module, G-sensor, collision warning and lane departure system.

140 viewing angle

The Xiaomi 70mai A800 4K Dash Cam has a 140-degree wide-angle lens, which allows you to capture every car approaching from afar. With WDR technology, there is always a clear image. the frame with the shortest exposure and the absence of illumination is superimposed on the frame with the longest exposure time and the resulting image is displayed on the screen: even in poor lighting conditions, the picture will always be clear and bright.

ADAS driver assistance system

70mai A800 4K Dash Cam is more than just a reliable dash cam. When you start the car, 70mai A800 automatically starts recording and activates ADAS (Advanced Driver Assistance System) to help you while driving Lane Departure and Collision Warning. Help you avoid accidents.

Installation of Xiaomi Car Rearview Mirror Dash Cam

Shutdown

Use one of the following methods to turn off the recorder:

The recorder will turn off automatically under the following circumstances:

Some vehicles continue to supply power to the cigarette lighter after the engine is turned off. In order not to discharge the battery, turn off the power of the recorder manually or by removing the power supply from the cigarette lighter if you do not use the tracking mode in the parking lot.

If the recorder is turned off manually, then the next time you start it, you must also turn it on manually.

Xiaomi Rearview Mirror Dash Cam Registrar Packaging Kit

1. Car Registrar 70mai Rearview Mirror Dash Cam Midrive D04 x 1pc.
2. Car power adapter x 1pc.
3. Power cable x 1 pc.
4. Cable routing tool x 1pc.
5. Lashing strap x 2pcs.
6. Instruction x 1pc.

Start / Stop Xiaomi Rearview Mirror Dash Cam

Main interface

Recording starts automatically after turning on the recorder. A flashing red dot at the top left of the screen indicates recording is in progress

: Audio recording is enabled by default. If you want to turn off sound recording, then click the button under this icon. The icon will change to.
When dual recording (front / back) is enabled, the icon will change to.

: Press the button under this icon to record the emergency. This will be saved in a separate directory of emergency records.

: Press and hold the button under this icon to turn off the recorder. Press the button under this icon to turn on the recorder.

: Click the button under this icon to open the album.

: Click the button below this icon to enter the Settings.

Status bar icons:

: This icon means the rear view recording function is on.

: This icon means parking tracking is on.

: This icon means Wi-Fi hotspot is on.

: This icon means the Wi-Fi hotspot is off.

The rear view recording function can be used when the rear view camera is connected.

You can turn Wi-Fi hotspot on or off by going to Settings Wi-Fi hotspot

DescrIPtion car dash cam Xiaomi Rearview Mirror Dash Cam Midrive D04

Connecting the power cable

Route the DVR power cable along the perimeter of the windshield as shown in the figure. Plug the car power adapter into the cigarette lighter.

You can use the cable routing tool included in the package to hide the cable under the rubber seal on the windshield.

Mirror recorder characteristics

Model: Midrive D04
Matrix: SONY IMX335
Resolution: 2560 × 1600
Camera FOV 140, F1.8, 6 lens lens
Wireless connection: Wi-Fi IEEE 802.11 b / g / n 2.4 GHz
Sensor: acceleration sensor
Supported OS: Android 4.4 or iOS 9.0 and above
Additional memory: Supports 16-64GB MicroSD memory cards Class 10 or above.
Power connection: Here is the car cigarette lighter
Battery capacity: 500mAh
Battery type: Li-ion polymer
Power supply: 5 V, 2 A
Dimensions: 304.3 × 76.7 × 15.2 mm

Installing 70mai App

An example of using the 70mai mobile application can be found in the instructions of the second registrar Xiaomi 70 Mai.

BYRGPUB.COM 2021