Buying and delivery.

There is nothing special to write about delivery. I ordered from the warehouse. Sent on July 16 with the JNTCUXX track, which after some time turned into a post track and arrived at the post office on July 23. At the expense of the purchase. the seller sets a low price for the goods, but for delivery it is almost the same amount. therefore, the real price is almost twice as high as. Be careful. I took at another link (https: // ru.Aliexpress.COM/item/327787770085.html), but now there is a two.monitor option for selling.

The box is well decorated, but the rumpled came. it was just put in the bag. Some complain about damage to the goods, but I was lucky, escaped with a box.

Inside is laid with polystyrene.

Completion: the stand itself (grabbed by the screed so that it does not decompose), USB units for installation at the base, a clamp for attaching to the table, all kinds of accessories in the bags marked in letters (a, c, with) and assembly instructions (take the tool F bolt from a)

Trade brand: Northbayou is suitable for most displays from 17 to 27 Load: 2-6.5 kg Vesa mounts: 75 × 75, 100 × 100 mm installation of the sleeve: Suitable for a thick table/table 0-95 mm installation of a clamp: Suitable for a thick table 0-95 mm/table and holes with a diameter of 10 to 50 mm

The instructions are quite understandable, there are options in English and in Chinese.

Step.by.step assembly of USB hub of an old monitor

Sometimes for working at the computer there is not enough the right number of USB ports with an excess of USB- devices. To solve this problem, there are two options.

The first is to disconnect unnecessary devices at the moment, thus freeing the USB. port. The second. to purchase a hub or USB concentrator. a device with several ports. Various views are available on sale.

The concentrator can be mounted independently from a failed computer or TV monitor.

Advantages of using USB hub

Using USB hub expands the functional activity of the computer. USB portions reduces the wear of the connectors. In addition, time is saved.

Without being distracted by switching devices, you can work quickly and efficiently. If the system unit is installed under the table by installing a USB hub, you do not need to bend to look for a connector.

You can simply install a home.made concentrator next to the computer monitor.

How to assemble a USB concentrator

A concentrator from an unsuitable LG or Samsung monitor is taken, freed from extra wires. The result is a small panel.

In stock. 4 USB ports and one USB type B. If you connect it directly to the computer, then PC sees nothing. On the side of the panel there is a connector, 5 volts are connected to it and two central ones. grounding.

Two wires are soldered to the connector, which are connected to the computer. An additional USB hub is determined on the computer monitor screen in the computer monitor in the “device with removable media”. A flash drive is connected to it. If the flash works, the check is over.

Having checked the work, you can take power from the USB port itself to the computer, directly wearing the wire on the board. So the USB and computer power will be connected.

In this concentrator there is version 1.1 that will work slowly. If you strengthen the additional fee, then the data transfer speed will increase. The hub is inserted into the box and you can work.

You can connect several hubs to a stationary USB. port. In theory. 127 devices in one port. But it must be remembered that data transfer is distributed between all devices. Therefore, speed can slow down.

Holes for mounting

On the left side of the block, I drilled a recess (not a through hole) for the screw. This is insurance for damage to the glue line under pressure.

On the other hand, I drilled a hole with a depth of about 1.5 cm using a Forethus chip.

I had to use the gasket to prevent closing to cut during the drilling. Then I installed an iron dowel to maintain a wooden mounting panel.

A pen

At first I made a round handle with a diameter of 3 cm and fixed it with a superglue in the hole. However, then I realized that she was completely uncomfortable.

DIY VESA Gaming Monitor Arm for only 15 | Homemade Gaming Gear

I replaced it with a square of plywood 5 x 5 cm with a hidden bolt glued and screwed into place. This is not so elegant, but such a pen is much easier to turn.

DIY

A homemade stand for the monitor when breaking the original can do you in real pennies. For the manufacture of a stand for a monitor with your own hands, you will need improvised materials. It’s especially good if you have any after repair.

  • 1 piece of plywood, 18 mm, 48 x 8.5 cm;
  • 2 pieces of plywood, 18 mm, 8.5 x 8.5 cm;
  • Wood.fiber plate, 18 mm, 12 x 12 cm;
  • bolts;
  • washers;
  • self.tapping screws;
  • glue;
  • Orlit.

First you need to decide on the size of the stand. In this case, all calculations have already been made. It is possible that you will have to adjust them. To decide on the size of the future stand, use a pencil, paper and organ, applying them and clarifying the correctness of your own calculations.

Put a piece of wood.fiber slab to the main stand of the stand using screws.

In one of the pieces of plywood 8.5 x 8.5 cm, make two holes for the washers. Do not take the plywood in this project less than the indicated thickness. She just can not withstand the load and break.

Measure the height of the countertop on which the monitor stand will be installed. Strengthen one piece of plywood with holes at the base of the rack, and the second at a distance equal to the height of the countertop. You can fasten plywood pieces with a durable carpentry glue. In this case, grooves for screws were made for reliability.

Insert two goals into the previously made holes made, screw the bolts in them. Wasis will allow the stand to be attached more reliably, and the bolts will rest on it, not allowing the monitor rack to shut down.

Fasten the monitor itself to the stand. To do this, use M4 bolts up to 10 mm long. Such bolts are universal and are suitable for most monitors.

The monitor stand is ready, you can fix it to the table. Adjust the strength of the installation with bolts.

Usage

So there was no free space at once, but the amplifier will leave soon, then the stand will move a little further. Well, in general, it is more important for me that I am now the second monitor can move closer without touching anything on the table.

Degree of freedom: the lower half of the stand is spinning 220 degrees, the full revolution does not allow, the stops are worth. Made in order to security and the impossibility of twisting cables around the stand. The upper half is spinning at 360, but you should not abuse. again the cable. You can tilt the monitor 35 degrees forward or 50 degrees ago. In a vertical plane, you can twist the monitor 360 degrees. but again the cable, so that over 180 you should not go far. Although personally I am quite enough and the turn is 90.

Assembling the bracket and installing TV

Din-rack is cut to the required length, focusing on the mounting holes for the bracket on the TV housing. A peoorized corner is screwed around her center. Given the shape of the rail, it will have to be placed from the TV side. After this, the edges of the rail need to be bent, because because of the corner it will not be able to closely fit to the mounting holes, and screw it with screws. In this case, the corner should be a bend down down.

After that, he jokes with a corner at a Din-rake with an already installed TV. Everything is tightened with one bolt to be able to turn the screen to the required angle of view. For reliability on the bolt, it is better to wind up 2 nuts, which will eliminate the breakdown of threads and relief from numerous screen turns.

If the TV is located in a place where the bracket is visible when viewing from the side, then you will need painting. Naturally, in this case, the tested bracket must be removed. It is best to use aerosol paint the corresponding color of the TV.

The manufacture of such a bracket will cost almost 10 times cheaper than the purchased. At the same time, it allows you to turn the screen, which only quite expensive factory brackets are capable of. In order to save money, if the mount is not visible at all, it can not even be painted, anyway, the corners and the DIN-rack are galvanized, so they will not rust.

How to make a stand for a monitor and integrate the speaker system into it

We tell you how to make an original stand for a monitor with your own hands. Cool solution for organizing workspace.

The stand will be made of natural wood, but you can also use plywood or wood.fiber plate.

If desired, a board or a furniture shield that you will use can be glued with veneer.

The main “feature” of a home.made stand is the presence of a built.in acoustic system.

This interesting idea was shared with us by the author of YouTube DIY Perks channel. We recommend that you take it!

The main stages of work

First of all, it is necessary to decide on the size of the stand. this will depend on the size of the monitor and the dimensions of the built.in acoustics.

After that, prepare the workpieces: we saw off by size of the board and glue the shield to make the shelf on which the monitor will stand.

From the boards we glue two identical boxes for speakers. Set the partition inside and drill a hole in it under the wires. We drink the front part at an angle, as shown in the photo below.

Prepare the front panels, drill seats in them and install the speakers.

We fasten the front panels to the front of the boxes and saw off them at an angle. Thus, the speakers will be directed right at you.

We glue the shield from the boards (or use the already finished furniture shield), then we saw it off in size. We fasten the boxes with speakers on the sides, and from below we make the compartment for the electronic “filling”. We fasten another speaker from below.

Install a home.made stand for the monitor on the table.

The shelf is specially raised above the surface of the table so that you can hide the mouse and keyboard under it.

How to make a stand for a monitor and integrate the speaker system into it

We tell you how to make an original stand for a monitor with your own hands. Cool solution for organizing workspace.

The stand will be made of natural wood, but you can also use plywood or wood.fiber plate.

How To Build: Monitor Mount | Flexpipe

If desired, a board or a furniture shield that you will use can be glued with veneer.

The main “feature” of a home.made stand is the presence of a built.in acoustic system.

This interesting idea was shared with us by the author of YouTube DIY Perks channel. We recommend that you take it!

The main stages of work

First of all, it is necessary to decide on the size of the stand. this will depend on the size of the monitor and the dimensions of the built.in acoustics.

After that, prepare the workpieces: we saw off by size of the board and glue the shield to make the shelf on which the monitor will stand.

From the boards we glue two identical boxes for speakers. Set the partition inside and drill a hole in it under the wires. We drink the front part at an angle, as shown in the photo below.

Prepare the front panels, drill seats in them and install the speakers.

yourself, bracket, monitor, home

We fasten the front panels to the front of the boxes and saw off them at an angle. Thus, the speakers will be directed right at you.

We glue the shield from the boards (or use the already finished furniture shield), then we saw it off in size. We fasten the boxes with speakers on the sides, and from below we make the compartment for the electronic “filling”. We fasten another speaker from below.

Install a home.made stand for the monitor on the table.

The shelf is specially raised above the surface of the table so that you can hide the mouse and keyboard under it.

Marking for assembly bracket

There are holes on the rear panel of the monitor in order to fasten the bracket. The distance between them on my monitors 100mm. Turning the plates in the hands, measuring the distances between the holes and combining with the corners, I found the optimal location. It consisted in drilling as few “holes” as possible.

In each plate for attaching to the monitor, only one hole is suitable for us. The manufacturers of the plates stumbled these holes with the devilish calculation, so that they could not be used for symmetrical fastening.

We drill one more. We measure exactly 100mm for this. I did not work out perfectly evenly, so I slightly increased the diameter for adjustment. The main thing is that the screws of the screws do not fall into the holes. See the photo.

yourself, bracket, monitor, home

The same operation is carried out with the mounting of the corners to the plates. The photo below shows which hole in the plate I used, and which drilled additionally.

Building details of the bracket

The necessary organs for two brackets of the opposite sex were found in the store “Fasteners”, which cost me 200. Below, I will list them in detail.

  • Corner Fastener505035 8pcs.
  • dowel 1061 4pcs.
  • Self.cutting 670 4pcs.
  • Washer M10 4pcs.
  • Haye M10 “lamb” 2pcs.
  • Bolt 1020 2pcs.
  • Washer M10 2pcs.
  • Washer M8 4pcs.
  • screw M412 20pcs.
  • screw M416 8pcs.
  • Haye M4 20pcs.
  • Fastener plate 200402 2pcs.

Details are listed for two brackets. This is what the plates look like.

Marking for assembly bracket

There are holes on the rear panel of the monitor in order to fasten the bracket. The distance between them on my monitors 100mm. Turning the plates in the hands, measuring the distances between the holes and combining with the corners, I found the optimal location. It consisted in drilling as few “holes” as possible.

In each plate for attaching to the monitor, only one hole is suitable for us. The manufacturers of the plates stumbled these holes with the devilish calculation, so that they could not be used for symmetrical fastening.

We drill one more. We measure exactly 100mm for this. I did not work out perfectly evenly, so I slightly increased the diameter for adjustment. The main thing is that the screws of the screws do not fall into the holes. See the photo.

The same operation is carried out with the mounting of the corners to the plates. The photo below shows which hole in the plate I used, and which drilled additionally.

DIY bracket under two monitors

Each active PC user of the same one comes to the conclusion that it is time to buy a second monitor! Well, here you are in a fit of passion and buy yourself 22 or 23 inches of monitor space. Arriving home and trying to put both monitors in horror, you understand that neither chavoshenka does not fit. Tears, snot and desire to break the second monitor from the foot. But the Internet is a storehouse of information, and after 5 minutes we will learn that there are special brackets for two, three, four, and even 8 monitors. But this is not a task, the price of this bracket is almost the cost of the monitor itself. Do not want to pay. do it yourself! And what is complicated in the bracket? Yes, nothing and complicated. All compounds can be simplified, while retaining the functionality, and this is the main thing for us. We will need:

Each active PC user of the same one comes to the conclusion that it is time to buy a second monitor! Well, here you are in a fit of passion and buy yourself 22 or 23 inches of monitor space. Arriving home and trying to put both monitors in horror, you understand that neither chavoshenka does not fit.

Tears, snot and desire to break the second monitor from the foot. But the Internet is a storehouse of information, and after 5 minutes we will learn that there are special brackets for two, three, four, and even 8 monitors. But this is not a task, the price of this bracket is almost the cost of the monitor itself.

Do not want to pay. do it yourself! And what is complicated in the bracket? Yes, nothing and complicated. All compounds can be simplified, while retaining the functionality, and this is the main thing for us.

yourself, bracket, monitor, home

We need: an aluminum or metal square profile 15-20mm. Leaf aluminum or iron 2mm. Wooden stand (board is approximately 200400mm more than 20 mm thick.)

We make a bracket with our own hands. First, cut into all the blanks, we will need two guides of 300 mm. and two 600mm. It is also necessary a pair of fasteners for monitors and fasteners to a stand. And the most important is a square workpiece for a rigid connection of two pairs of guides.

I printed the workpieces on self.adhesive and cut out a corner grinding, you can also use a jigsaw or hacksaw for metal.

IMPORTANT. All holes must be made up to a millimeter, otherwise the bracket will be a scythe and a curve! To accurately drill holes, it is best to use a rack for a drill, this will make your life several times.

After grinding and processing the edges, everything can be collected. First, connect the guides using bolts.

The ability to adjust the height to be able to adjust the height and distance between the monitors, I drilled several holes every 20 mm. Thus, it will be possible to configure the bracket for different monitors.

Next, we install the holders of the monitors, as well as using bolts, but we connect the fasteners to the stand with the guides using rivets.

Lastly, we attach the entire structure to the stand. It is very important to fix it so that the monitors are located in the middle of the stand, otherwise the whole thing can fall back or forward.

That’s all. Half a day of work and 500 money spent.

Subscribe to our channel in Yandex.Zen or Telegram channel @overclockers_news. These are convenient ways to monitor new materials on the site. With pictures, advanced descriptions and without advertising.

BYRGPUB.COM 2023