Discord Overlay

On weak PCs, this overlay affects the performance of the processor, so we recommend disabling it.

gopro, player, image, settings

Optimal graphics settings for nvidia graphics cards for CS: GO

To increase the graphics capabilities of the video card, you need to go to the NVIDIA Control Panel. We do this by right-clicking on the desktop.

In the second step, find the “Advanced 3D Image Settings” section. Click on the “3D Settings” section and select the additional section “Adjusting Preview Image Settings”. This gives us the opportunity to take into account our arbitrary settings.

To configure, select the cs go program (if it is not in the list, add it yourself) and set the settings as in the screenshots below. Click the “Apply” button and restart your computer.

Updating Drivers.

In Windows 10, go to the Start menu and look for Device Manager. Then we perform an automatic search for drivers in the “Video adapters”, “Processors” section and also in the problematic sections with the “!” Icon (if any).

Setting up CS: GO graphics. Guide how to increase fps in cs go 2020.

Disk Defragmenter

If you are using an SSD drive, then this item is not needed. Greetings to all HDD owners! This procedure allows you to speed up the reading and writing of various files, and therefore, the work of programs and applications will increase.
Open “My Computer”, select the disk, right-click on “Properties”

Select the “Service” section and click “Optimize” two times. It is advisable to carry out the procedure on all discs that are available to you.

Setting launch parameters.

The next point is setting special parameters, thanks to which CS: GO should function better. First, go to the Steam library, right-click on our game and see the “properties” tab, then click “set launch parameters” and enter the following parameters in the line that will be highlighted:
-nod3d9ex is a command responsible for reducing the use of your RAM, which is important. Also responsible for quickly switching the game between windows
-high command, thanks to which your FPS can also increase, since it meets the high priority of the game.
-processheap is a command that helps to avoid a sharp drop in fps during a long game
-threads “number of cores” is a command that activates all processor cores when starting CS: GO, but you first need to unlock the cores! on this later.
-novid removes the initial splash screen of the game.
These commands can be used to allow the player to improve counter-strike fps and the graphics capabilities of the video card if you have a weak computer.

Configuring launch options

Optimal CS: GO graphics settings

Below is a list of methods to optimize your PC or laptop for a comfortable CS: GO game:

Unlocking the processor cores (CPU)

Open the standard “Task Manager” using the CtrlAltDel keys. Next, go to the “Performance” section and open the “Resource Monitor”

Next, we can see the number of cores and threads that your central processor can handle. Not all kernels are working for you, this is due to the fact that Windows decided to limit the work of kernels and it does not need them during the execution of simple tasks.

Next, go to any search engine and enter “unpark cpu” and then go to the very first site coderbag.com and download by clicking the “Download application” button at the bottom of the page.

Then we launch our application and adjust the slider to 100%. This will use all the available kernels that you have. Then we press “Unpark All” and end the operation with the “Apply” button.

Power management diagram

The Windows operating system allows you to switch between operating modes of computers and laptops with lightning speed. In the “Power supply” section of the standard “Control Panel”, it is possible to choose between pre-prepared presets, including parameters of the equipment (brightness, permissible load) and the system as a whole. And, if there is a need to increase FPS, then in the list you must select the option “High performance”.

And if you also download the Driver Booster tool, you will be able to activate the Power Plan, which turns off some background processes and services and allows you to fully focus on the gameplay.

I Made The ‘Perfect’ CS:GO Config (In-Depth Settings Config Download Link)

Setting up Nvidia and AMD graphics cards

From performance charts to custom graphics settings:

    You will have to set exclusive options for CS: GO through the “Nvidia Control Panel”, available in the context menu when you right-click on the desktop.

In the interface that appears, you need to expand the list “3D Options”, and from there. switch to “Adjusting preview picture settings”. A page with a description of the selected section and a list of available actions will open in the menu on the right, where it is important to select the option “Advanced 3D Image Settings”.

The next stage is the transition to “3D Parameter Control”. First, global settings are specified for the item Anti-Aliasing. Mode. In the context menu, select “Off”.

From the global to the particular. IN “Software settings” first you need to select Counter-Strike: Global Offensive from the drop-down list (if the game is not found, you must click on Add, and then add manually), and then repeat all the points marked in the screenshots below.

Settings are saved when you click on the button Apply. Before starting CS: GO, it’s best to restart your computer first.

CS: GO settings for weak PCs

The tactical shooter from Valve offers more and more content every year: skins, maps, cooperative modes. due to the innovations that have appeared, the life of owners of weak PCs has become more difficult. FPS began to sag more often, and regardless of the selected graphic settings, cards take longer to load, and the load on the processor has greatly increased. Time to bring Counter-Strike: Global Offensive back to life with performance-enhancing tricks.

Launch parameters

Counter-Strike: Global Offensive performance is also affected by pre-configured launch parameters added to “Properties” games on Steam.

In the window that appears on the tab “Are common” left to click on “Set launch parameters”.

After that, you must enter the following combination of commands:

Commands without quotes, commas, or separators are added. Applied with the “OK” button.

And, although the introduced combination is universal, it is advisable to know which values ​​have been added, and therefore. a short decoding:

  • -console. activates the ability to call the console in the game;
  • -novid. skip the start screen;
  • -threads 4. enables support for 4 processor cores. For dual cores, you need to set the option.threads 2;
  • -refresh 120. adjust CS: GO for the monitor refresh rate. If the display supports 60 or 75 Hz, then you need to set the appropriate value. Refresh 60;
  • -high. sets high priority to the process in Windows;
  • cl_cmdrate 128, cl_updaterate 128, rate 128000, ex_interpratio 1.tickrate 128. a set of common network parameters that balance the gameplay.

Adil “ScreaM” Benrlit

Command: None
Country: Belgium
Age: 22 years old
Rating: 1.11
K / D ratio: 1.11


  • DPI: 400
  • EDPI: 750
  • USB Rate: 1000
  • Sens in Windows: 5
  • In-game sensitivity: 2.5
  • Zoom sensitivity: 1
  • Mouse acceleration: 0
  • m_rawinput: 1

ULTIMATE CSGO 2020 Settings Guide


  • Resolution: 1280 x 960
  • Aspect ratio: 4: 3
  • Dimension: black bars
  • Refresh rate: 144

cl_crosshairalpha “200”; cl_crosshaircolor “4”; cl_crosshaircolor_b “50”; cl_crosshaircolor_r “250”; cl_crosshaircolor_g “250”; cl_crosshairdot “0”; cl_crosshair_t “0”; cl_crosshairgap “-1”;

settings about cs go players 2019

REFERENCE! “Configs” are a set of configuration console commands. Here the configuration parameters will be given, and you can find the commands in the second section of the article.

Those who are familiar with the specifics of CS: GO firsthand, played or simply followed someone else’s game for a long time, were amazed and admired the game of professionals in tournaments. If we didn’t know that these guys are pros, having met them in the opposing team, they would have immediately decided that they were cheaters, and the most desperate would have thrown them a couple of reports.

And each of us after the tournament was visited by the question: “How to become as cool? What can I do to make my teammates stop calling me a noob? “

Yes, in addition to magic, higher powers and tons of hours spent in CS: GO, professional players are also used to adjusting all game indicators for themselves, for greater productivity and comfort.

The configuration settings for CS: GO players will be discussed in this article.

XGoPro Player Image Settings

Configs for professional CS: GO players

Alexander “s1mple” Kostylev

Team: Natus Vincere (among the people “Navi”)
Country Ukraine
Age: 19 years old
Rating: 1.36
K / D ratio: 1.52


  • DPI: 400
  • eDPI: 1236
  • Mouse frequency: 1000Hz
  • Mouse sensitivity in game: 3.09
  • Mouse sensitivity in Windows: 6
  • Mouse sensitivity in zoom: 1
  • Mouse acceleration: 0
  • m_rawinput: 1


  • Resolution: 1280 x 960
  • Format: 4: 3
  • Dimension: Image stretched
  • Refresh rate: 240Hz

cl_crosshairalpha 250; cl_crosshaircolor 4; cl_crosshairdot 1; cl_crosshairgap.1; cl_crosshairsize 1; cl_crosshairstyle 5; cl_crosshairusealpha 1; cl_crosshairthickness 0; cl_crosshair_sniper_width 1; cl_crosshair_drawoutline 0;

Launch parameters
-novid.freq 240.tickrate 128 –console

Jake “Stewie2k” Yip

Command: MIBR
Country: USA
Age: 20 years old
Rating: 1.05
K / D ratio: 0.99


  • DPI: 450
  • EDPI: 832.5
  • USB Rate: 1000
  • Sens in Windows: 6
  • In-game sensitivity: 1.85
  • Zoom sensitivity: 1
  • Mouse acceleration: 0
  • m_rawinput: 1


  • Resolution: 1024 x 768
  • Aspect ratio: 4: 3
  • Dimension: black bars
  • Refresh rate: 240

cl_crosshairalpha “200”; cl_crosshaircolor “4”; cl_crosshaircolor_b “50”; cl_crosshaircolor_r “250”; cl_crosshaircolor_g “250”; cl_crosshairdot “0”; cl_crosshair_t “0”; cl_crosshairgap “-1”;

Marcelo “coldzera” David

Command: MIBR
Country: Brazil
Age: 22 years old
Rating: 1.16
K / D ratio: 1.2


  • Resolution: 1280 x 960
  • Aspect ratio: 4: 3
  • Dimension: stretched
  • Refresh rate: 144

cl_crosshairalpha “200”; cl_crosshaircolor “2”; cl_crosshaircolor_b “50”; cl_crosshaircolor_r “250”; cl_crosshaircolor_g “250”; cl_crosshairdot “0”; cl_crosshair_t “0”; cl_crosshairgap “-2”;

The sight of a player from the Natus Vincere team under the nickname Zeus

This esportsman also uses his own settings. The appearance of the crosshair for the player in CS: GO is somewhat similar to the previous one. Only in this case it does not have aligned edges. That is, the center remains empty. Green rectangles at the top, bottom and sides. The size is small. Dynamic shooting. When driving, any changes are minimal. Suitable for experienced gamers only. Here are the settings:

cl_crosshairalpha “200”; cl_crosshaircolor “1”; cl_crosshaircolor_b “50”; cl_crosshaircolor_r “250”; cl_crosshaircolor_g “250”; cl_crosshairdot “0”; cl_crosshairgap “-2”; cl_cross_crosshairsize “4.5”; clrosshairsize “4.5”; clrosshairsize.
cl_crosshairthickness “1”; cl_fixedcrosshairgap “-2”; cl_crosshair_outlinethickness “0”; cl_crosshair_drawoutline “0”.

Many viewers and fans of his activities have already positively assessed him more than once. There are practically no complaints. The only caveat is the color choice. But it was selected based on personal preferences for the comfort of the gameplay. On the other hand, there are many different places on the maps. Lighting and gamma will be inconvenient. What affects the efficiency. In the future, this will determine the speed of the reaction. Any changes are allowed if necessary. But there is no guarantee that it will get better.


Taken from one of the popular streamers. This has also been seen in several esports players. The scope is popular for CS: GO players due to several of its merits. The look fits perfectly with any map and lighting. The outline is black. The cavity is white inside. Small in size. Plus, it changes dynamically as needed. To expose, you will have to register the following:

Also, do not forget about the cfg folder in the Steam directory. There is a file called config.cfg. It contains many different inscriptions. It is worth looking for exactly what is in any description of the sight. That is, the first line. Then everything is replaced with the one you need. Then it is saved and the document is closed. Editing is possible in any text program. Notepad or word will do. Also, enabling / disabling individual parameters is allowed directly from the console. There you will also need to activate specific configs. This happens to the command:

  • -exec “config”.cfg. Where, instead of a word in brackets, the name is written.


Sights of professional CS: GO players

Each gamer chooses during the game in any shooter those settings that seem to him the most rational and convenient. Due to the fact that you can adjust the game parameters you need, mouse sensitivity, select buttons for certain actions and commands. all this increases the comfort of the game.

And if you are a professional gamer who spends a lot of time in the gaming space, then you cannot do without individual settings. The selection of settings “for yourself” makes it possible to make the gameplay the most practical and convenient, which will affect both the state of mind and the results of the game.

One of the very important technical parameters in the multiplayer shooter Counter Strike is the sight of a firearm. Thanks to the high-quality adjustment of the sight, the gamer can get many advantages for his game character. That is why sights for CS: GO players attract close attention of novice gamers.

Newcomers to Counter Strike hope that if they adjust their scope exactly like the famous professional gamers, they will immediately become much better at going through all the rounds in this shooter. This is a delusion, because in addition to the sight itself, professional gamers also have a wealth of experience, excellent gaming skills and a large number of locations, the passage of which gave them their skills.

So if you hope that by aiming at exactly the same settings as those of professional CS: GO players, you will play much better, then you have to disappoint you, it will not work out that way. Most likely, at first it will even be uncomfortable for you to play with the settings that professionals use.

It will not be possible to get used to someone else’s sight settings quickly, since every gamer adjusts the scope of a firearm in such a way that it is convenient for him to play. For example, if your vision is worse than that of a certain pro player in CS: GO, then you will not need its settings, you need to adjust the sight specifically for yourself, your vision, your monitor, and so on.

So just copying someone else’s crosshair settings in CS: GO won’t work, since most likely they just won’t work for you. You can use scopes for pro players in cs go, but this does not mean that you will not have to adjust those parameters that do not suit you. It is still more convenient to play with those sight settings that you have chosen for yourself, without relying on the professionalism of other gamers.

Examples of scopes for CS: GO players

If you still hope that it will be easier for you to play with the scope settings from professional gamers, then you can select several of the most famous professional gamers, take a closer look at their settings, copy them and make your own scope settings based on these parameters.

This will be the most practical option, since many CS: GO pro players have different settings. You can set an average setting for your game character, which will allow you not to rely on any one professional gamer.

We will give as an example the parameters of scopes for players who are members of the “Natus Vincere” team. And as you can see from these given examples, even for gamers who are in the same team, the settings are different. So there is no point in blindly copying the settings of some player and setting them for your own sight.

Do what is more convenient for you and it will become much easier and more pleasant for you to play. This is still a game and you should rest during the gameplay and enjoy the actions of your game character.