Cable Internet via modem
A telephone line is required. ADSL can be used with automatic network connection if the device can connect itself.
The ADSL modem manuals describe the WAN connection.
Which connection is better to use?
Connecting via mobile internet
The only advantages are mobility. The disadvantages are low coverage, low data transfer rate, depending on many conditions, including the time of day and weather. And most importantly, not all video recording devices have a function for connecting to the Internet via mobile communications.
Direct access
This refers to the cable from the user to the provider. Excellent browsing speed and low cost of the service.
Settings for accessing the registrar using a router
The client program from PC to IP gets to the router, which transfers us to the IP of the registrar.
To assemble the above chain, you need the following:
- register the network settings in the video surveillance device;
- perform router port forwarding;
- specify the required settings for access to the video surveillance device in the client program.
Debugging the “client-application” access to the video surveillance device
Open the “client application and enter the settings window.” Create a device group and add a video recorder to it:
- device name;
- IP address;
- port number;
- how many pieces. video cameras are connected;
- name;
- access code;
Then do not forget to save all the changes made.
Done, so the settings are complete. Using the client application, you can watch a dynamic picture from the device and record it, and you can also manage the device settings.
Satellite connection
With excellent coverage of all corners of the planet, there is a significant disadvantage of the high cost of services via satellite Internet.
Setting up video surveillance via DynDNS
Consider an example of setting up video surveillance over the Internet in the absence of an external static IP address using the DynDNS service hik-online.com from Hikvision.
It should be noted that the service can only be used for video recorders, network recorders and Hikvision IP cameras. It can work if the provider does not block ports i.e. You are not behind a NAT provider.
First, you need to configure the device (DVR, NVR or IP cameras) as described here Instructions for setting up video surveillance via the Internet.
Then register on the service www.hik-online.com/ in the User Name line, indicate a fictitious name that will subsequently be used only to access the service.
After registration, we log in to the service by entering the name and password that we specified during registration.
After authorization on the Device Management tab, press the add key to add a device.
In the window that appears, enter a name for the device Device Name. This name will later be used to access the device, the name should consist only of uppercase Latin letters and numbers. Enter the serial number of the device, which can be copied from the web interface of the device through the browser on the Local Configuration / Device information tab. In the http Port field, enter the http port number that was registered in the virtual server. In our case, this is port 81.
Now on the Device Status tab we see that our device is connected to the service.
If you click on the device name, it will become available in a new tab with an address like http://www.hik-online.com/ device name. Then the service redirects the request to the IP address and port on which your camera is currently located.
Go to the network settings section of the camera on the DDNS tab in the DDNS Type list, select HiDDNS. The Server Address field should contain the address of the service www.hik-online.com. In the Domain field, enter the same name that was indicated in step 5 when adding a device.
Hikvision dvr computer configuration ivms 4200 configuration for computer / laptop tutorial
Now we can connect the camera to IVMS software. To do this, in the add mode, you must select HIDDNS, enter an arbitrary name with which this camera will be displayed in the software, in the device domain field, enter the name that we entered in step 5.
We will see the result on the Main view tab.
We do the same on the IVMS mobile client for Android, IoS and Java MIDP2
Security systems “Prometey” design, installation, maintenance Video surveillance, ACS, fire alarm.
Video surveillance in St. Petersburg and the Leningrad region.
Connecting Phone to Hikvision DVR
The steps to access Hikvision DVR from a mobile phone are very simple. Install the iVMS-4500 application on the mobile phone, press the Hik-connect button to create an account, and finally add the DVR by pointing its QR code on the mobile camera.
Step-by-step process for setting up a Hikvision dashcam for viewing over the Internet:
Monitor connection
The Tantos DVR will need a monitor for the initial setup for web browsing and can be viewed remotely later. DVRs have outputs that are capable of connecting a TV as a monitor using BNC, HDMI, VGA, or even composite RCA connections, depending on the equipment purchased.
Algorithm for configuring the DVR for viewing via the Internet:
Setting up dynamic DNS
Dynamic DNS (DDNS or DynDNS). it is a method of automatically updating a name server in the DNS domain name system in real time, with active DDNS configuration of its configured hostnames, addresses or other information.
Dynamic configuration is required if the SIM card has a dynamic public IP address. You can find more information about what a dynamic external IP address is, but in general this means that it can change over time, usually when you disconnect or re-register online. Dynamic DNS assigns a hostname to an IP and continually updates this name. But even if the IP changes, DDNS will assign the same hostname to the new IP, making the router accessible through the same name at any time.
You need to use an external DDNS service to create a hostname and assign its IP. Routers support many of these services. You can find a complete list of DDNS services in the “Services” → “Dynamic DNS” section of the router’s web interface. Now that you’ve finished configuring your devices, you should check if the configuration is working properly. Two common ways to configure the router for the DVR over the Internet: via a media player and a web browser.
You can view live video from the camera using the VideoLAN Client (VLC) player. VLC works on all systems:
Router configuration for Hiwatch
After you finish configuring your camera, it’s time to set up your router. First, you need to consider what configurations will need to be done to set up the Hiwatch dashcam for viewing over the Internet:
Create a custom name for the new rule, set the following parameters:
Security system setup instructions
The next step to configure the DVR to view over the Internet remotely: Access through a web browser. It is carried out using a mouse or wireless remote control. From the system menu of the DVR, select the Network submenu and make sure the DHCP and Web Service checkboxes are checked.
Setting up a video surveillance system
The idea is to initially connect the cables from the digital DVR to the router and work in a local configuration for testing, and then on a remote network under normal control mode.
If the user already has access to the DVR from the Internet using a mobile app, and the local and remote configuration in test mode has shown normal operation, but something still does not work as expected in normal mode, the following steps can be followed.
DVR. local connection and configuration:
Setting up the DVR for viewing over the Internet: step-by-step instructions
Knowing how to set up your DVR to view it over the Internet is critical to installing and connecting to the World Wide Web of your video surveillance system. Working with a network of cameras with a single router is not technically difficult. To do this, you need to know the basic computer networks and the security system. In the past, they were monitored by a security guard who was locked in a room all day, watching monitors to make sure nothing illegal was happening on the premises.
Modern devices have the ability to view the security system remotely, in real time. The technology has made such progress that it can send altered state notifications directly to a mobile phone or tablet so that the user knows what events are captured by a security camera.
Automatic DHCP
The DHCP setting screen confirms that the DHCP mode is set to automatic. If this is not the case, adjust it by pressing the “OK” button.
Wired connection
How to connect the dash cam to a computer via USB or HDMI? Attach the audio / video cable to the back of the device. When using HDMI, simply line up the pins from the cable connector with the jack on the DVR and attach it securely. If using RCA plugs, insert the red and white audio connectors into the corresponding ports on the back of the dash cam. Attach the other end of the cable to your computer using an HDMI or USB port.
Turn on the device and wait for the computer to display the message “found new hardware”, then follow the instructions to launch your software to download the DVR recordings to the computer or data from the hard disk to the device.
Observation of an object using AHD video cameras: equipment and installation
In order to organize such monitoring, you will need the following equipment:
- AHD cameras with power supplies;
- video recorder (receiver);
- a computer;
- cables;
- specialized software.
When everything you need is already at hand, you can start installation.
These AHD camcorders are easy to set up and can be installed outdoors.
DVR setup
Before connecting the DVR to your computer, you need to determine what outputs the DVR has. Let’s take a look at the rear panel of the Motorola DCT6208 as an example. Of the 4 ports available on this DVR for video (DVI, Video / Audio Out, S-Video, and Firewire), Firewire is the only one that carries both video and audio. Since only one connection needs to be established, this is the easiest way to do it. In addition, many computers are already equipped with FireWire, so you don’t have to buy a video capture card. If this option is not available, DVI should be used along with Audio Out. If your DVR model does not support DVI, please connect via Video / Audio. The last option is S-Video. You will also have to use Audio Out here. This DVR does not support the latest HDMI standard and USB connection, transmitting audio and video faster than any other alternative.
- Connect the network port of the DVR to the RJ45 port of the computer (LAN network cable).
- Turn on the DVR.
- From the menu, select Network Settings. Typically, there are two options here. One is called “Obtain an IP address automatically” and the other is called “Use the following IP address”. Choose the second.
- After selecting this option, you must specify the IP address of your DVR. Just enter a simple IP address. For example, select “192.168.1.20” and the subnet mask “255.255.255.000”. Apply settings.
Wireless connection
Some models can be brought into working condition directly. All you need is an appropriate cable. Ethernet. The configuration also takes place with the help of a connecting product, which is used in the organization of private networks, namely “twisted pair” with RF-45 outputs. So, after fixing the cable according to the attached manual, you need to configure the technique. First, it makes sense to perform the following series of actions:
On a laptop, it is important to set a static address. To do this, you should go to the “control panel”, and then to “network and Internet”.
Through this tab it is possible to go to “change adapter parameters”
By pressing the right mouse button, click on “properties”. And now select the “Internet protocol”, where, accordingly, you need to write the address.
Thus, in the address bar of any browser, you can enter the IP and access the equipment, while using only the password and name.
How to set up and connect the DVR to a PC
There are many reasons why a direct copying process from a DVR to PC is not possible. First, many DVRs do not have USB or Firewire connectivity. Second, the file systems and video files used by DVR manufacturers are usually in Linux format and often proprietary, making the direct copy extremely complex and incompatible with Windows and Mac environments. Third, technology manufacturers are trying to prevent this. they don’t want copying information to be easy. Tips for using the DVR:
- Most DVR models require a cable. It is highly recommended to test all the details and, if necessary, configure dial-up access to the network.
- Place the DVR in a cool, dust-free place.
- Do not install or remove the hard disk when the DVR is powered on.
- Turning off the DVR during playback or recording may damage the hard disk.
- Waterproof protective coatings to extend the life of the wires.
- To prevent electromagnetic interference, try to avoid high voltage lines nearby.
- To ensure the best image quality, beware of lighting problems when installing cameras.
How to connect the DVR to a computer.
- Connected cameras to the DVR using the supplied cables.
- Connect the DVR to a monitor (make sure it supports 1280×1024 resolution).
An Ethernet cable is used to connect the DVR to a router and high-speed internet.
Setting up a smartphone to view the DVR
How to connect a camcorder
Technologies are improving every year. And now the user can afford the interaction of two equipment without a wire. Therefore, this device can be switched on in two ways.
Wired connection
- It is preliminarily recommended to read the instructions.
- Then you need to insert USB from the video device directly to the equipment.
- The operating system will have to determine the external connection within a few minutes. And you have to go to “my computer” and find “USB video”. You need to click on this folder. Most likely, the automatic driver configuration will begin, which will mean a complete installation of the camera. However, sometimes you need to install programs yourself. A disc must be included in the package. You will need to insert it and find the file with the “exe” extension. When you open it, hints will be available, which are better to follow and also achieve results.
- Finally, it is necessary to reboot the unit so that the video device can fully function in the future.
There are other methods that differ from the previous one by using different ports.
- The 1394 port is also likely to come in handy. It significantly improves the picture quality.
- If this is not the case, then you will have to purchase an IEEE 1394 controller. Usually it is inserted into the side hole, and into it is the plug of the connecting cord. Thus, both attachment and detachment are formed as a USB stick.
- Verification of the correctness of the execution of the process is carried out using software. If you see yourself on the screen after entering the “video device” area through the menu, then you have done everything reliably.
interesting news portal
Monitor connection
The Tantos DVR will need a monitor for the initial setup for web browsing and can be viewed remotely later. DVRs have outputs that are capable of connecting a TV as a monitor using BNC, HDMI, VGA, or even composite RCA connections, depending on the equipment purchased.
Algorithm for configuring the DVR for viewing via the Internet:
- Connect the modem to the Internet. They usually have a series of indicators on the front panel that indicate states to let the user know how the device is currently operating. Usually a router has one port for connecting to the World Wide Web. Which is located away from others and placed on the back of the router for devices that connect to the Internet.
- The connection is made with a CAT5 cable.
- Connect the DVR to the monitor via HDMI or VGA port, both on the DVR and on the monitor. The first one is the preferred one to use.
- Now that there is equipment configured and connected, make sure everything works.
- DVRs may have menus that look slightly different, but the settings are generally the same. The same goes for routers.
Setting up a video surveillance system
The idea is to initially connect the cables from the digital DVR to the router and work in a local configuration for testing, and then on a remote network under normal control mode.
If the user already has access to the DVR from the Internet using a mobile app, and the local and remote configuration in test mode has shown normal operation, but something still does not work as expected in normal mode, the following steps can be followed.
INTERNET CONFIGURATION OF HIKVISION DVR
DVR. local connection and setup:
- Connect DVR with cat5e network cable to router.
- Connect the router to an Internet service provider. When configuring the dash cam router, pay attention to the router. It usually has blue ports, which are used for internal devices, and a yellow port for connecting to the Internet.
- Check the local connection to the DVR.
- Before configuring Remote Mode, make sure you can access the DVR using a computer or laptop from web browsers: Internet Explorer, Google Chrome or Firefox.
- Most digital DVRs and IP cameras are compatible with Internet Explorer (IE), so it is recommended to try this web browser first and then others.
- In it (IE) enter the IP address of the DVR, as well as the username and password that are created.
- Usually when the user first tries to access the DVR through a web browser, a message appears asking to install the plugin. Just click to accept the offer and unpack it.
- After entering the correct username and password, you can see your cameras through the web browser, which means the local installation is ok.
- DVR works properly via LAN and send video to web browser (IE).
- Make sure the DVR has all the correct Network information for the remote access configuration, which can be checked in its menu.
- Click on the DVR “Configuration” and “Network” menu.
- In the main Network settings menu, check the following: IPV4 IP address of DVR depending on its range, IPV4 subnet mask, usually the same as computer mask, default gateway IPV4 is the IP address of the router, DNS server. you can use 4.2.2.2 and 8.8.8.8.
- If DHCP. Dynamic Host Configuration Protocol is checked, the DVR will get all the information from the router, just make sure it is correct and uncheck the DHCP checkbox.
- Configure the ports of the DVR, the program uses them to communicate with the web browser, computer software and mobile application. These are virtual ports, not physical ones. Information is available in the “Network” menu in the “Basic settings and port” section.
Setting up the DVR for viewing over the Internet: step-by-step instructions
Knowing how to set up your DVR to view it over the Internet is critical to installing and connecting to the World Wide Web of your video surveillance system. Working with a network of cameras with a single router is not technically difficult. To do this, you need to know the basic computer networks and the security system. In the past, they were monitored by a security guard who was locked in a room all day, watching monitors to make sure nothing illegal was happening on the premises.
Modern devices have the ability to view the security system remotely, in real time. The technology has made such progress that it can send altered state notifications directly to a mobile phone or tablet so that the user knows what events are captured by a security camera.
Why is Khodorkovsky trying to rock the Arkhangelsk region
A criminal case has been initiated into the death of people under an avalanche in the Khibiny
Security system setup instructions
The next step to configure the DVR to view over the Internet remotely: Access through a web browser. It is carried out using a mouse or wireless remote control. From the system menu of the DVR, select the Network submenu and make sure the DHCP and Web Service checkboxes are checked.
- Click the Apply button, save the settings and the link to the IP address. This is the local IP address of the DVR and will only be available on a PC connected to the same network router as the digital DVR (wired or wireless).
- Open the web browser from a computer connected to the same network as the DVR.
- In its address bar, enter the IP address, for example: http://192.168.0.100:8080.
- Before going to the DVR settings for web view, perform port forwarding and make sure that it is possible to connect to the DVR using the local IP address.
- To access the digital DVR and view video from security cameras connected to it remotely, you need to configure the router so that it sends traffic from the local network to the digital device.
- Make sure the ports 8080 and 554 are open using the port test tool in the set up for Internet access to the DVR. If the port is open, you need to use the remote IP with the IP DVR tool.
- Enter it as follows through the web browser http: // ipaddress: port. For example, if the IP address is 74.96.36.98, it should look like http://74.96.36.98:8080.
- If the ports are closed, you need to call your DSL provider, you may need to connect your modem to a third party router.
- Open a web browser and register an external IP address.
- Enter the username and password. Default: ADMIN, 1234.
- When the connection is complete, you can see the cameras.