Cloud WI-FI camera how to connect to the phone

Posted on : 05.03.2021
Article 

Features of video surveillance in the country

When installing video surveillance in houses where the user is absent for a long time, it is necessary to take into account the important features of the construction of systems.

Be sure to purchase power supplies with a redundancy function. if the power supply is turned off, access to watching the video will not stop. It is necessary to use equipment with low energy consumption in order to save on the payment of electricity bills. In addition, it will extend the runtime from the backup power source.

The software and the hardware itself must support the function of switching on by the command of the motion sensor. Continuous wireless signal transmission via GSM networks to a mobile phone reduces the remaining limit, and it makes no sense to receive information from rooms in which the situation does not change.

Built-in memory cards will help to recreate the events that took place if the broadcast to the Internet was interrupted for any reason.

Manything

Free mode provides storage of recordings from one smartphone for 30 days on the manufacturer’s cloud.

For a fee, it is possible to record around the clock.

The disadvantage of the program is the delay in the image for a few seconds relative to real time, which does not greatly affect the security functions.

Cloud technologies

Most manufacturers of IP cameras provide users with the ability to store and view video on their cloud services. The advantage of the method is that it is easy to set up and requires minimal programming skills.

The main advantage of cloud technology is that you do not need to acquire a white (static) IP address to identify the camera on the network. Currently, cellular operators provide addresses of this type for an additional fee from 200 to 900 rubles / month. Thus, the cloud-based method of video surveillance is the most accessible in places where the Internet is exclusively mobile (through cellular operators).

  • IVideon supports its own brand Nobelic cameras and Hikvision’s third party devices.
  • YOULOOK supports Axis, Hikvision and Vivotek cameras.
  • CamDrive supports exclusively in-house manufactured equipment.
  • IPEYE allows you to view the image from the camera of its production and any others that support the RTSP protocol; resolution no more than 5M, no need to buy recorders. cameras are connected via routers.
  • SpaceCam, designed to view RVi cameras (not all models), HiWatch, SpaceCam.
  • Ezviz (based on Hikvision), allows the connection of external motion sensors, door openers, alarm buttons.

When choosing a cloud, take into account the peculiarities of tariff plans, the cost of video cameras and available equipment.

Free options are often limited to only real-time monitoring without saving archives. Paid versions of programs differ in functionality, amount of space on the cloud and storage time of archived video files.

Setting up and connecting is different, but in general, the algorithm is as follows:

  • They buy video cameras, connect them to routers to access the Internet.
  • Install the application on the smartphone (iPhone) if it will be used as a camera.
  • Register a personal account on the cloud service.
  • The address and serial number of the camera are registered in the equipment settings. Use of QR code possible.
  • Press the “search” button in the cloud program.
  • The service finds the camera and establishes a connection. Carry out additional settings, achieving stable illumination and accurate triggering of the motion sensor, which is guaranteed to start recording.

YCC365 PLUS | 2020 Latest instructions

Available video surveillance technologies via mobile Internet

Video surveillance via a smartphone can be organized in various ways. Each of the options will require the correct selection, installation and configuration of equipment.

For private use, it is preferable to choose inexpensive components. Take into account the skills of working with digital devices if they plan to install themselves.

The relatively inexpensive options for video surveillance over the mobile Internet are:

  • direct connection to the camcorder using mobile applications;
  • watching video through cloud services;
  • use of broadcasting from p2p devices. digital video cameras.

The choice of the method depends on the availability of equipment and the quality of the Internet in the place from which it is planned to broadcast.

TrackView

In addition to the motion detector, a user notification has been added about the appearance of noise in the area of ​​the camera installation. Recording will automatically start in both cases (motion and noise). View, included in manual mode is available. Information is stored on “Google Drive”.

Subscription frees you from viewing ads and blocks private mode.

Mobile phone applications

The simplest option to connect a CCTV camera to a mobile phone (smartphone) is to use an old smartphone in the video source mode. The owner’s phone, tablet or desktop computer installed at the workplace will receive a signal and show the state of the object.

The general algorithm for the installation and operation of such systems:

  • Purchase a paid or download a free app.
  • Install programs on the “transmitter” and “receiver” (smartphones, iPhones).
  • Connect the “transmitter” and “receiver” to the network of the cellular operator.
  • Launch the app on both devices.
  • In the “settings” tab of the receiver, select the necessary parameters of the streaming video.
  • The transmitting smartphone, when movement is detected in the visibility zone, will turn on video recording and transmit a signal to the receiver phone. It can be an SMS or a signal in the application.
  • The observer, having turned on the necessary mode, sees the picture.

Each of the programs has connection and settings features that must be studied and followed exactly.

Apps tend to provide additional functionality:

  • enabling recording of what is happening and saving files in the cloud service for 30 days;
  • broadcasting sound environment;
  • the ability to turn on the “walkie-talkie” mode, which will allow you to broadcast speech through a smartphone camera, for example, giving a command to pets;

Alfred camera

The program interface is laconic and intuitive. Several cameras can be connected to one transmission channel. The standard features include a motion detector, which triggers recording, night mode (with minimal illumination), two-way communication. The manufacturer provides space on the cloud service for storing records. With the owner’s permission, other users, such as family members, can view the recording. The described functionality is free.

Paid subscription offers improved image quality and additional storage space in the cloud.

Solution to the problem

And this problem is solved quite simply. The only negative point is that the printer must be Wi-Fi capable. It would seem that everything is simple, turn on Wi-Fi on your device, then on a printer and print as much as you like. But no, not all printers can see Android or iPhone, and not all devices can connect to the printer. To solve these problems, as well as for the most comfortable use, a number of programs have been developed. Accordingly, you can connect your phone to a printer via Wi-Fi.

Connecting a phone to a printer via Wi-Fi

There is a program called “Wireless Printer / Cloud Print”. A very functional program that allows you to connect to most printers. The program has worked very well with printers from HP, Canon and Kyocera. Below is a list of the features of the “Virtual Printer” program:

  • It is possible to print from all Android devices that support the program, on all printers that are connected to this service;
  • Printing of any documents and photo images in various resolutions, converting files, etc.

All the simple complexity of connecting the program consists in adding the necessary printers. Not all printers have access to the Internet, but many support printing from cloud storage. In this case, you need to link the printer to your Cloud Print account. The order of steps for connection is determined by the printer manufacturer. For example, a Canon printer can be easily connected via Google Chrome.

Instructions on how to connect the printer to the phone

In modern times of advanced technology, there are often cases when you need to send, print or download something literally on the go. Smartphones and tablets on mobile operating systems began to act as a kind of intermediaries between man and computer. Quite often we download something to our device and then transfer the files to where we need it. But if sending something through the phone is quite simple, just a couple of keystrokes, then is it possible to print something from your Android or iPhone? Of course yes!

To do this, you just need to connect the printer to your phone via Wi-Fi or USB. Can this be done, and if so, how? Let’s sort it out in order.

We connect the printer

The very first, tricky and not always working way of connecting is via USB. It does not work with all phones, tablets, and printers. However, there is a way to connect your phone to a printer via USB. For starters, your phone or tablet must have a USB Host output. In other words, it is the ability to connect various kinds of flash drives, computers, and so on to a phone or tablet.

If your device is capable of reading information from them, then everything is fine. In addition, you will need special software for the device. In other words, drivers. Finding drivers for an Android phone is quite problematic. There are very few of them and most often the printer does not read information from the phone. And the smartphone, in turn, does not see the printer. In this regard, devices from HP are very good.

HP has developed its own software for the Android device. The application is called ePrint, after the installation of which, printers from HP will be visible to your tablet or smartphone. iPhone also supports this software. The exact same program with the same name is available in the App Store.

But do not despair, not only HP printers can be connected via USB. By installing the “USB connection Kit” application, you can connect your phone to a Canon printer. Of course, some Canon models may not be visible to your device, but don’t worry! Try it, and if nothing helped at all, then there is another way to solve this problem.

Software use

Using the “Virtual Printer” software is very simple, first you need to select the required document (file), then select the printer on which you want to start printing. If necessary, you can set the print parameters, and then send the file to the printer. In order for this to work, it is necessary that the PC or laptop and the printer are turned on. It is also necessary that the PC has regular Google Chrome (it is not necessary to run it during the printing process). Documents can be sent from any cloud storage.

The following program is called “PrinterShare”. It positions itself as a program that can work with any file extensions. With it, you can also connect a printer via your phone. Importantly, the printer can be connected via Bluetooth, Wi-Fi, USB, or via a local network via the Internet. The connection method does not play a special role, the main thing is that the printer is registered in the PrintShare cloud storage, and the necessary software is installed on the computer. And of course, when you connect your phone to a printer via USB, you will need an OTG adapter. It is also required that the device supports USB Host.

The advantages of this software are that it is possible to print absolutely everything from your device. It is possible to print letters from e-mail, print calls and SMS messages. You can also print a calendar or a list of contacts, which is very convenient in certain situations. over, when printing, it is possible to choose an easy-to-read font, adjust borders, headers and footers, sheet size.

Another easy-to-use program is called “Printbot”. The app allows you to connect to a printer that is on the same local network as the device.

Of all the applications discussed above, the simplest to understand and use is “Wireless Printer”. Simple interface, easy installation, wide range of possibilities. All you need is a personal computer and Google Chrome installed on it.

However, the most successful application in terms of functionality is the “PrinterShare” program.

Now, to the question: “is it possible to connect a phone to a printer”, you can answer. definitely yes!

Connecting a compatible Andro device Android 4.0 or later smartphone users and Nikon cameras with NFC technology can use the NFC (Near Field Communication) function to connect the Nikon camera to the smartphone and open the app.

All you need to do is position the N-mark of the camera next to the Android smartphone to launch the Wireless Mobile Utility and both devices can establish a connection. After that it will be possible to take pictures or view pictures.

Select Nikon digital cameras have built-in Wi-Fi, making it easy to connect to compatible smart devices. The wifi module settings can be found in the settings menu.

Go to the Wi-Fi settings in the settings menu and select “Enable” to enable the Wi-Fi module on the camera.

Selecting the “Enable” item to enable the Wi-Fi connection, you will see that the “Network Connection” item is set to “ON.”.

When the network connection is turned on, the Wi-Fi icon will blink at the bottom right of the screen while the connection to the smart device is being established. When the connection is established, the icon will stop flashing.

It’s easy to connect the camera’s built-in Wi-Fi to your smart device. For an Android ™ device, this is done automatically. IOS users need to open the “Settings” menu on the phone, go to the Wi-Fi settings and select the network name (SSID). It starts with the word Nikon, followed by a series of letters and numbers. By selecting the network SSID, you can open the Nikon Wireless Mobile Utility app on the smart device since the connection has already been established (the illustration shows the settings screen of an iPhone 5 based on iOS 7).

When a connection is established between the camera and the smart device, you can view images on the camera using the Wireless Mobile Utility or take pictures using the smart device as a remote control.

Programming & Setting up Home Security WiFi IP Cloud Camera, Auto Tracking PTZ Wireless

If a connection is established between the camera and the smart device, you can choose which photos you want to view: those recorded on the camera memory card, saved in the camera folder of the smart device, or last downloaded from the camera to the device.

Connecting a compatible Andro device Android 4.0 or later smartphone users and Nikon cameras with NFC technology can use the NFC (Near Field Communication) function to connect the Nikon camera to the smartphone and open the app.

All you need to do is position the N-mark of the camera next to the Android smartphone to launch the Wireless Mobile Utility and both devices can establish a connection. After that it will be possible to take pictures or view pictures.

Select Nikon digital cameras have built-in Wi-Fi, making it easy to connect to compatible smart devices. The wifi module settings can be found in the settings menu.

Go to the Wi-Fi settings in the settings menu and select “Enable” to enable the Wi-Fi module on the camera.

Selecting the “Enable” item to enable the Wi-Fi connection, you will see that the “Network Connection” item is set to “ON.”.

When the network connection is turned on, the Wi-Fi icon will blink at the bottom right of the screen while the connection to the smart device is being established. When the connection is established, the icon will stop flashing.

It’s easy to connect the camera’s built-in Wi-Fi to your smart device. For an Android ™ device, this is done automatically. IOS users need to open the “Settings” menu on the phone, go to the Wi-Fi settings and select the network name (SSID). It starts with the word Nikon, followed by a series of letters and numbers. By selecting the network SSID, you can open the Nikon Wireless Mobile Utility app on the smart device since the connection has already been established (the illustration shows the settings screen of an iPhone 5 based on iOS 7).

When a connection is established between the camera and the smart device, you can view images on the camera using the Wireless Mobile Utility or take pictures using the smart device as a remote control.

If a connection is established between the camera and the smart device, you can choose which photos you want to view: those recorded on the camera memory card, saved in the camera folder of the smart device, or last downloaded from the camera to the device.

Hello everyone! One of these days, it was necessary to urgently connect the camera to a laptop, since the native “webcam” burned out on it. I decided to use the phone camera as a second video camera, and as practice showed, I still managed to do it. So further I will try to tell you in as much detail as possible: how to connect and use a smartphone as a webcam via WI-FI.

How to connect the camera to the phone via WI-FI

Using Nikon’s Built-in Wi-Fi

Using the built-in Wi-Fi of a compatible camera

To use the Wi-Fi function of Nikon cameras with built-in Wi-Fi, download the free Wireless Mobile Utility app.

In addition, a memory card must be inserted in the camera for full access to the Wi-Fi menu.

Using an Android ™ device

For Android ™ device users, download the app from the Google Play ™ Store and install it on their Android ™ device.

Using an Apple ™ device

IOS users should download the app from the iTunes Online Store®.

Android users can connect their smart device to a compatible camera in three ways, while iOS users only one. The following instructions for connecting by selecting a WI-FI network or camera SSID on a smart device are suitable for both Android ™ and iOS users. This is the fastest and easiest way to connect as it uses an unencrypted connection.

Android ™ users can also establish a connection by using the WPS (Wi-Fi Secure Setting) button if the smart device supports this function, or by entering the PIN for WPS (Wi-Fi Secure Setting). For step-by-step instructions on how to set up a connection using these methods, see your camera’s user manual.

Once connected, you will have access to the camera from the app. When Remote Shooting is selected in the application, live view starts automatically, allowing you to see what is in the camera lens on the smart device.

Using Nikon’s Built-in Wi-Fi

Using the built-in Wi-Fi of a compatible camera

To use the Wi-Fi function of Nikon cameras with built-in Wi-Fi, download the free Wireless Mobile Utility app.

In addition, a memory card must be inserted in the camera for full access to the Wi-Fi menu.

Using an Android ™ device

For Android ™ device users, download the app from the Google Play ™ Store and install it on their Android ™ device.

Using an Apple ™ device

IOS users should download the app from the iTunes Online Store®.

Android users can connect their smart device to a compatible camera in three ways, while iOS users only one. The following instructions for connecting by selecting a WI-FI network or camera SSID on a smart device are suitable for both Android ™ and iOS users. This is the fastest and easiest way to connect as it uses an unencrypted connection.

Android ™ users can also establish a connection by using the WPS (Wi-Fi Secure Setup) button if the smart device supports this function, or by entering a PIN for WPS (Wi-Fi Secure Setup). For step-by-step instructions on how to set up a connection using these methods, see your camera’s user manual.

Once connected, you will have access to the camera from the app. When Remote Shooting is selected in the app, live view starts automatically, allowing you to see what is in the camera lens on the smart device.

Organization of a direct connection between Wi-Fi printer and router via WPS

  • To answer the question of whether you can connect a smartphone or tablet to a printer in order to send documents to print directly from a mobile device, you need to enable WPS on your router. But for this you may need the name of the SSID and the password from it.
  • In addition, it would be nice to make sure that the device really has WPS support.
  • Also find out your PIN. you can find it on the box from the router and it usually consists of 8 digits preceding the MAC address or serial number.
  • If all the conditions are met, then enable WPS on your router. Type in “192.168.1.1.” In your browser. Use the word “admin” as your login and password.
  • Open the “Security / Security” section, then set the “Enable” parameter in “WPS SETUP”.
  • Also check if MAC address filtering is disabled. It is worth noting that some routers have a WPS button that you just need to press.
  • Click on the “Network” section and go there to “Wireless”. Check the item “Wi-Fi Protection Setup”.
  • Please note that to organize communication between both devices, you need to enable WPS in a range that does not exceed 2 minutes!
  • Finally, try using the printer configured this way through your phone or tablet. If printing was successful, then everything was done correctly, otherwise, pay attention to the following method.

How to print to a printer from your phone

Many users are often interested in the answer to the question of how to print from a phone to a printer. After all, thanks to this, you can not transfer the necessary document to the USB flash drive, because you can simply drop it on your iPhone or iPad, and then print it out at any time using an MFP. But first you need to solve the problem related to how to connect the printer to the tablet. To do this, familiarize yourself with the methods listed below. perhaps one of them will be more preferable for you.

Printing with Google Cloud Print

A possible solution to the problem related to how to print a document to a printer from a phone is to use a virtual printer from Google. You can find out more interesting and important information about Google cloud print in this article. To use this method, follow these steps:

  • Sign in to your Google account on your Android tablet or smartphone and set it up to use Google Play, Gmail and other Google applications.
  • Install the Google Chrome browser on the personal computer connected to your device. if this has not been done before.
  • Download and install Cloud Print software on your mobile device.
  • Now open your Google browser on your PC and click on the “Menu” icon located in the upper right corner. She herself represents three horizontally located lines.
  • In the drop-down menu, find “Settings” and clicking on this item, scroll to the bottom of the page until you find a link that reveals additional settings
  • Now find the section with Google Cloud Print and click on the button responsible for adding a new device. Thus, you will run a command that will help you find printers connected to your PC and configure them properly.
  • In turn, launch the previously installed Cloud Print application on your tablet or phone. Wait for it to sync with your Google Cloud Print account.
  • You can open the document that you plan to print and click on “Share”. The menu should now have an option called “Cloud Print”.
  • Click on the print item and wait for your file to be printed. But keep in mind that in this case, not only the printer itself must be turned on, but also the computer to which it is connected.

Establishing a connection using Wi-Fi

If you decide to establish a wireless connection to print photos, then Wi-Fi must be present on both the smartphone / tablet and the printer. There are several ways to solve the problem of how to connect Android to a printer via WI-FI. For example, modern models of printing devices have the ability to send a task directly via Wi-Fi Direct. To do this, you need to enable it by opening the “” section in the settings of the mobile device. In some versions of Android OS, it is written as “Wi-Fi Direct”.

However, using this method with the help of earlier models of printers will not work, but you can go another way. connect to the network. To do this, you need to make the printer networked not through a personal computer, but to connect directly to the router. In general, thanks to the wireless connection, you can use your mobile device to print photos and texts without any problems.

Establishing a connection via a USB cable

If you plan to set up printing of all kinds of documents on your smartphone or tablet, then you can use a regular USB cable. But it should be said right away that this option is not the best, because Not all printers and mobile devices can do this. To start printing from iOS or Android, you need a USB-HOST output on your smartphone / tablet. In addition, you will need the appropriate drivers for the device.

It should be noted that there are very few printing office equipment with drivers suitable for devices running Android OS. But sometimes the device starts to become visible after installing an application such as “USB connection Kit”. If you succeed in fulfilling all the conditions, then the device for printing will be visible as USB. After that, you can send any document to print.

Among all modern manufacturers, only HP has taken care of its models of printers and MFPs. The fact is that she has developed a special application called ePrint, the installation of which allows you to see almost all models of HP printing office equipment on tablet computers connected using a USB cable, for example, an ipad.

Printing with Dropbox

Another great solution to the problem discussed in this article is to use Dropbox, which is a cloud storage. This option is best if you need to print a document to a PC outside of the wireless coverage area. At the same time, there is support for printing text documents and photographs of various formats.

  • To get started, download and install the Dropbox app on your smartphone or tablet, as well as on your PC.
  • Save all those documents from your personal computer that you would like to access from your Android device to Dropbox.
  • Log into the account under which you registered in the application from any PC that is connected to the printer.
  • Open access to the files that you uploaded to the cloud storage and click on “Print”.
  • At the end, wait until the end of the process of printing the selected documents.

TinyCam Monitor

The application works with cameras directly, can support and show the broadcast of 16 devices in total. There are free and paid versions of the software. In the latter, the following functions are available:

  • If the camera is equipped with a speaker and microphone, two-way communication can be established through the app.
  • Activation of broadcast recording to an SD-flash drive, network storage via FTP (FTPS) or to the cloud (via http or https).
  • Audio transmission.
  • Motion sensors support.
  • Free developer support.

Connecting Wi-Fi CCTV camera to phone and apps for work

Modern Wi-Fi cameras have several protocols for connecting to devices. If earlier access was made via a local network and did not extend beyond it, now through the same network with Internet access you can connect to a separate device, monitor and control the video camera remotely. Let’s take a closer look at how to connect a Wi-Fi camera to a phone.

Applications

There are many applications on the network, but you can count on the fingers of one hand. In the selection, we chose only those that deserve attention.

UniFi Video

The utility is a tool for professional video surveillance. It will help you connect the Wi-Fi camera to your iOS and Android phone. The wizard allows you to perform the initial configuration of the video camera with the addition of an IP address. Supports work with multiple devices.

  • Switching between monitored cameras.
  • The main parameters of the broadcast are displayed on the screen.
  • Image settings.
  • Switching shooting modes.
  • Using PTZ technology to rotate the surveillance device.
  • Audio control.

There is one drawback of the program, but a significant one. Without the NVR, the application will not interact with the cameras.

Such a device supports the simultaneous operation of fifty observation devices, which is acceptable for an office building or a complex of several buildings. To work with 1-2 video cameras, it is recommended to choose your own software or another application.

Connection

To connect a Wi-Fi CCTV camera to a smartphone and control it from anywhere in the world, you need:

By connecting the camera’s Wi-Fi to your phone, you need to create a more secure connection. Recommended:

  • Use a backup independent power line (exclude power interruption).
  • Use a backup Internet connection, for example, a modem of cellular operators (exclude a break in the Internet cable).
  • Use a backup access point that is independent of your power supply (prevent damage to the main router by configuring reconnection to a backup access point, which the neighbor probably has).
  • Purchase a Wi-Fi camcorder that supports connection to multiple channels of a wireless network and rich alarm functionality (notification to a smartphone, e-mail, video recording to network storage, sound recording, online snapshots, etc.).

If the router is configured, the access point is active, the video camera is plugged into a 220V network, connect them to a single network. Connecting Wi-Fi camera to smartphone:

  • There is a WPS button on the body of the router. Click her.
  • Go to the camcorder and press the exact same button on it (for this you have 2 minutes, but no more). If there is no button, you can activate the WPS connection through the web interface of the IP camera. How to enter it is always indicated in the instructions.
  • After entering pairing mode, the first device will detect the second and connect it to its local network.
  • Connect your smartphone to the Wi-Fi network of the router.
  • Install the software to work with this CCTV camera.
  • Go to the application and make all the necessary settings for establishing communication. The program provides step-by-step instructions.
  • Done. You have connected the Wi-Fi camcorder to your phone.

The question remains, what is this application? Each manufacturer specifies the software that the Wi-Fi camera works with. Usually, these are proprietary utilities aimed at working with equipment from the manufacturer. But there are “universal” applications through which video surveillance devices from different manufacturers are connected.

An example of connection can be seen in the following

MEyePro and MEyeProHD

An application that can be tested for all functions before connecting a camcorder to it. With the help of a test street camera, access to which is provided by the developers, you can:

  • Save the video stream as a snippet and photo to a connected storage medium (SD card, network storage).
  • Use additional features for devices that support PZT.
  • Adjust video and audio settings.

The application works with iPhone and Android smartphones.

Setting up video surveillance for viewing on a smartphone is presented in the following

Setting up remote control of a video camera from a smartphone is easy if a router is already present at its location and a Wi-Fi network is deployed. Some video surveillance devices support direct pairing with a smartphone, but the connection in this case is limited to the coverage area of ​​the Wi-Fi adapter of the camcorder.

Connecting the camera’s WI-FI to the Internet

You need to connect the camera to your wireless network before enabling broadcast on your phone. The connection is made via the WI-FI Protected Setup protocol or by manual data entry. Before connecting the IP camera via WPS, make sure that the device you are using supports this technology.

You can check the availability of the WPS function on the camera box, on the manufacturer’s official website or in the instructions. WI-FI Protected Setup is indicated by an icon in the form of two arrows, each of which indicates the end of the other. A separate button for quick connection can be placed on the IP camera body, marked with this icon.

Press the button and then activate the WPS mode on the router. This is done by pressing the same button on the router (no later than 2 minutes later) or via the web interface. You can also connect a video surveillance device by entering a PIN code in the control panel of the router. The code is located on the box from the IP camera, a separate insert or among the data on the sticker at the bottom of the device.

MEyePro and MEyeProHD

These programs allow you to connect to WI-FI cameras from your phone, save screenshots and video clips from the broadcast, control several devices at once. Additional controls have been added to the interface for IP cameras with PTZ support. With MEyePro, you can also adjust the picture and sound parameters.

Important advice! To test the utility’s capabilities, use the test WI-FI camera, access to which is provided by the developers. Data for connection are indicated on the program pages in Google Play.

TinyCam Monitor software

With this application on your phone, you can view the simultaneous broadcast from multiple cameras. The total number of devices that can be connected for viewing in the TinyCam interface is 16. The program also has a paid version. TinyCam Monitor Pro, which differs in a set of additional features:

  • Bidirectional audio transmission without restrictions (if the equipment supports this function);
  • Record video to SD card, FTP server or cloud storage;
  • Support for software and hardware motion sensors;
  • Work on a secure SSL protocol (encryption of received and transmitted data);
  • Sound transmission in the background;
  • Free technical support from the developer;

How to connect IP camera to a smartphone on Android or ios

Connecting a wireless WI-FI camera to the phone: necessary applications to watch the broadcast

How to connect and configure an IP camera to view video through a phone. Using WPS to quickly connect to a WI-FI camera. Smartphone programs with which you can watch the broadcast and control video surveillance.

UniFi Video App

This utility from Ubiquiti Networks is a professional tool for organizing video surveillance from your phone. Separate versions of UniFi Video are developed for different operating systems, including mobile: iOS and Android. After the initial configuration and adding the IP addresses of the cameras used, the utility provides the following options:

  • Switching between different IP cameras;
  • Display of broadcast parameters;
  • Picture setting;
  • Change of shooting mode;
  • Pan using PTZ (Pan-tilt-zoom) technology;
  • Sound control.

Uninterrupted operation and wide functionality are the main advantages of the application. The main drawback of Ubiquiti software is the need to use a Network Video Recorder (NVR). Therefore, such a solution is more suitable for connecting video surveillance in a large house or office.

You can connect up to 50 different IP cameras to your Ubiquiti NVR system. If you plan to work with 1-2 devices, it is advisable to use solutions without an NVR. If necessary, videos can be recorded to SD card or cloud storage. This will help reduce the cost of equipment and further maintenance of the surveillance infrastructure.

It is important to know! For UniFi Video to work correctly, the NVR controller version must be at least 3.1.0.

Eye 4 app to control Vstarcam cameras

The best option for viewing video from Vstarcam devices on the phone is the Eye 4 utility. It allows you to integrate IP cameras into the Smart Home system, and not only get access to the image and sound. With built-in functions, you can control all parameters of video surveillance equipment.

In addition to the usual horizontal and vertical rotation, the Eye 4 also provides feedback to cameras equipped with a speaker. After pressing the “Talk” button, the mode of sound transmission to the room where the WI-FI camera is installed is activated. The app also allows you to activate infrared light and even update the camera firmware from your phone, remotely.

Note! Video stream recording via Eye 4 is performed only on the built-in microSD memory card. The ability to save information in the cloud is not provided.

Connecting an Android smartphone to a PC via Wi-Fi

Connecting an Android smartphone to a PC via a wireless network

A smartphone often has to be connected to a computer. mainly in order to upload some files to it or download a photo or video from it (note that it is still more convenient to download photos and videos automatically using some cloud service like Dropbox).

Connecting to a smartphone via a cable is not very convenient, and there is a danger of loosening the connector in the smartphone. But how do you connect without a cable, you ask?

There are such ways, there are! over, the types of connections may be different. not only for downloading files, but also, for example, to display information from the smartphone display on the monitor screen, to access other phone data, and so on.

But first, let’s talk about a wireless connection for downloading files one way or the other.

The easiest way, which does not require the installation of any additional programs on your PC. this is WI-FI File Transfer app from Google Play.

Install it on your smartphone, launch it. The application displays the Internet address that you need to type in the address bar of your browser on the PC. The computer and smartphone, of course, must be on the same local network.

Type this address in your browser. and you get to the file manager, which displays the contents of the memory of your smartphone.

Photos, pictures and videos can be displayed separately. Dragging and dropping files with the mouse only works one file at a time, but when you click the Download button, the application can zip the selected folders and download them in bulk to the Downloads folder.

In the application on the smartphone in the settings, you can make this program automatically start when connected to a specific network. and then a smartphone in this network will be available from the browser constantly.

The second option is also very simple. access via FTP. In this case, you get access to the folders of the smartphone directly in the explorer.

To do this, you need to launch remote access via FTP on your smartphone. Some manufacturers have this feature built right into the file explorer, but if this is not the case, then you just need to install the free ES Explorer program. In it, in the menu, open the Network. Remote access.

And there they will write to you the address that you need to drive into the PC in the explorer window in order to work with the smartphone’s memory as with a regular disk.

The third option is much more advanced. using the MyPhoneExplorer program. For a smartphone, you need to download and install MyPhoneExplorer Client.

And for a Windows PC, you need to download the MyPhoneExplorer server program, which you can take, for example, here. At the first start, select the type of connection.

Well, after that, the pairing with the phone takes place. And then not only files become available to you, but also contacts (which can be saved in this program on a PC), calls, calendar and messages.

And here you can work with standard copy-paste just completely, simply by dragging and dropping files and groups of files with the mouse to the destination folder.

All SMS. The program can save in its archive the SMS that you deleted from the phone.

Well, you can work with the calendar here. view events, add new ones and so on.

In the application on the smartphone in the settings, you can make this program automatically start when connected to a specific network. and then a smartphone on this network will be available permanently to the PC when the corresponding application is launched.

Broadcast from smartphone to monitor or TV

Often it is necessary to broadcast what is happening on the smartphone screen to the big screen. monitor, TV.

There are a lot of programs for this, I use Screen Stream Mirroring Free.

She knows how to stream from a smartphone to a monitor (via a web browser), media players, Chromecast devices, UPnP, DLNA and Miracast.

Install the program on your smartphone, launch it. It displays you the address that you need to drive into the browser.

Enter the address in your browser. the broadcast went. over, on a smartphone, you can turn on the microphone and broadcast what this microphone says to the computer speakers.

If you have Google Chromecast or a similar device installed on your TV, you can use this program to connect to your TV as well. you just need to select the type of connection in the menu.

Here is an image on the TV from my smartphone, with which I am taking pictures of the TV at this moment.

So, as you can see, the smartphone does not have to be connected to the computer with a cable. there are more convenient ways to share information wirelessly.

BYRGPUB.COM 2023