Table of Contents

Reasons Why iPhone Power Button Doesn’t Work

Thanks to the lock (power) button, your iPhone can fully function. turn on and go into standby mode, thus saving precious charging percentages. However, there are times when the iPhone’s power button starts to jam or breaks altogether. We have collected most of the most common causes of a broken power button on your iPhone, as well as helpful tips to fix the problem.

Why is the power button on iPhone faulty

There are many reasons that can cause the power button on the iPhone to stop working.

The most common reason that brings a lot of problems to every iPhone user is a simple software glitch. It is not that difficult to identify it, in rare cases it is harmless to your iPhone. However, it can scare any user if caught by surprise.

Fixing a software glitch is easy if it is a one-time occurrence and there are no problems with the iOS update. In this case, in order for the power button on the iPhone to work again, you just need to restart your smartphone.

The second most common reason your iPhone power button might not work is due to improper update or poor quality jailbreak. One way or another, not everyone knows how to properly update their devices.

Many users are very frivolous about installing updates: they do not download them to the end, interrupt the final reboot, download updates with a low percentage of charge due to poor Internet. Each of the listed items can cause the installation of a “broken” update, which will bring a lot of minor and major troubles to your iPhone.

Only a master will be able to identify the wrong update and say for sure what exactly is the reason for the malfunctioning of the power button on your iPhone. But you can independently monitor the operation of your device: usually, an incorrect update does not bring any one problem, other failures should be noticed in the system that have not been observed before.

If you find them, try downloading a previous iOS backup via iCloud if you created it before. It definitely shouldn’t be worse from this procedure, and if you made the right diagnosis, the shutdown button will return to normal after the previous version of iOS is restored. Then you can try updating your iPhone again.

Sometimes the power button on the iPhone fails due to the fact that too much dirt has accumulated inside, which interferes with the operation of contacts. One way or another, we often do not notice with what hands we take our smartphone, where we leave it and quite rarely monitor the cleanliness of our iPhone.

If dirt gets into the small gaps around the button, you may notice some key jamming. But when pressed firmly, it will work. In this case, you can very carefully use a needle to clean the small connectors around the iPhone’s power button. It is very important not to overdo it, so as not to damage the contacts and not to dismantle the button.

button, working, iphone

If dirt has formed an obstacle inside the button and prevents the contacts from working properly, you are unlikely to be able to clean it yourself. You can try to drop a little alcohol on the button (one drop, no more), and then very gently press it, as if distributing the alcohol inside. However, keep in mind that doing so may cause additional harm if the power button cable components or any other part in your iPhone has been damaged.

Therefore, in order to avoid trouble, it is better to contact the service center master and ask him to diagnose your device.

If iPhone comes into contact with moisture, in most cases, it has unpleasant consequences. Yes, Apple is committed to protecting users and is providing improved water resistance for the new iPhone 11 and iPhone 11 Pro. However, the risk of breakage after moisture is still very high, so if you encounter moisture getting into your iPhone, be sure to contact the service center for a diagnosis by an experienced technician.

If, after contact with moisture, you notice the iPhone power button sticking, this may indicate damage to the loop or oxidation of the button contacts. It is very important to understand that the ingress of sugary liquids, soda, tea or coffee is doubly detrimental to iPhone components.

This problem can only be solved by fully restoring the iPhone after getting wet. This procedure can be carried out at the service center.

Dropping your iPhone is just as damaging to its components as contact with moisture. If the power button stopped working after a mechanical fall or a strong blow, it is quite possible that its loop was damaged or the contacts were broken.

Unfortunately, this problem cannot be fixed on your own. However, if you do not have time now to contact a service center or call a repairman at home, you can resort to a temporary solution to this problem. configure the AssistiveTouch hotkey to lock and turn on.

  • Open iPhone Settings
  • Go to the main settings menu
  • Open the accessibility settings tab
  • Then turn on the AssistiveTouch function
  • After that, the system will prompt you to create a special hot button on the screen, which can be responsible for locking or turning on / off your iPhone.

Attention! This is only a temporary solution to the problem. Please do not neglect this method and contact the master in time to avoid other damage.

Failure of the power button loop

Unfortunately, even Apple users are not immune to system crashes and hardware failure on the iPhone. Sometimes there are defects in components that are admitted in production. The power button loop is no exception.

If it is possible to fix a software failure yourself, then a failure in the operation of the power button loop on the iPhone, which can be caused by many different factors, is almost impossible to fix yourself.

over, such a failure can only be diagnosed by the master, so do not postpone a visit to the service center.

Careless use can also break the iPhone’s power button. As well as mechanical damage, a strong pressing on the button itself can be fraught with damage to the contacts or internal sticking of the silicone “tubercle”. which is responsible for giving a signal to the system.

If, after a strong press, the iPhone power button stops functioning normally or responds to your touches intermittently, you should contact the service center.

If you find a marriage too late, you should contact the service center. Most likely, professionals will be able to quickly fix this problem by replacing the power button cable on your iPhone.

Damage to the power button loop

(IPhone 11 Pro Power Button Flex)

Damage to the button cable on the iPhone is a rather unpleasant breakdown that can manifest itself both instantly and gradually. Only a master can diagnose this breakdown and fix it.

The first urge to break the power button loop on the iPhone:

  • The power button works by itself
  • iPhone reboots / shuts down on its own
  • When you press the power button, nothing happens

Burnout / damage to contacts

The iPhone power button flex cable is connected using a small mechanism with contacts. If one of them is damaged due to improper assembly / repair, moisture ingress or falling, the power button may refuse to perform its functions.

Unfortunately, contacts are not restored. A full replacement of the iPhone power button cable with a new one is required.

A reasonable solution in case of failure of the lock button on the iPhone would be to contact a specialized iLab service center so that the technician could conduct unscheduled diagnostics and tell you the exact reasons for the breakdown. Nevertheless, many users ignore this breakdown, go to the Internet to look for reasons and life hacks to fix it.

Every component of the iPhone is an important and very fragile part that can fail if misused or carelessly used. If you value your iPhone, you must take care of its safety: do not neglect the routine diagnostics of the device, contact the service center in time, take care of purchasing a protective glass and a case for the iPhone, avoid contact with moisture and fall / shock. This is the only way to achieve good and long-term performance of your favorite device.

Also, do not forget that not all problems with the device can be fixed on your own. Even if the breakdown touches such a small component as the power button, you need to sensibly approach the situation and provide the iPhone for repair to a professional.

How to turn on sound in iPhone without a button?

The switch (mute) is at the top of the phone on the left. By switching it to the “down” (to mute) position, you turn on vibration and reveal an orange strip under the switch itself. Position “up” means that the sound in the phone is turned on.

Why can’t I hear the interlocutor on iPhone?

Due to the fall of the iPhone from a height, not only the speaker fails, but also the iPhone microphone. During a call, it performs the function of noise cancellation. Due to a fall, the audio codec or loop breaks down, due to which the smartphone perceives all sound incoming from the subscriber as noise and extinguishes it.

How to turn off silent mode on iPhone 11?

Vibration during calls and silent mode

On older iPhones, go to Settings and Sounds. Set the desired vibration settings for iPhone in Ringing or Silent mode. If you turn off both options, the iPhone will not vibrate.

How to turn off silent mode on iPhone 7?

The easiest way to turn off the sound on your iPhone is to use the switch located above the volume buttons on the left side of the case.

How to enable ringer on iPhone?

Open “Settings”, select the section “Sounds, tactile signals” and set the appropriate volume of the ringtone and notifications. Here you can also enable “Change with buttons”, which will allow you to adjust the volume of the ringtone using the volume button on the left side of the iPhone.

How to turn on the sound on a mobile phone?

Change sound and vibration settings for other alarms

  • Open your phone settings.
  • Tap Sound & vibration Default notification sound.
  • Select sound.
  • Click Save.

How to Fix iPhone Touch Screen Not Working

In the process of using iPhone, many users complain that their iPhone touchscreen is not working after updating or resetting.

It is really annoying when your iPhone screen is not responding. If it is a problem with the iPhone touchscreen itself, you should take it to a repair shop to fix the problem.

READ  Which memory card is best for a Samsung smartphone

However, the problem may be caused by an app, operating system, or iPhone.

In this article, we list 3 methods to solve iPhone touch screen not working.

  • Way 1. Best Way to Fix iPhone Touch Screen Not Working Properly
  • Way 2. iPhone touch screen not working after being dropped? Force restart iPhone
  • Way 3. iPhone touch screen not working after update? Restore iPhone

Way 1. Best Way to Fix iPhone Touch Screen Not Working Properly

The first method is also the best one we want to recommend using iOS System Recovery to fix iPhone touchscreen that stops working.

iOS System Recovery. It is the most professional recovery software that allows you to fix system problems iPhone touch screen not working, black screen, etc.

Fix iPhone Touch Screen Unresponsive, White, Black, Etc.

Get iPhone out of headphone mode, recovery mode, Apple logo, etc.

Fix iPhone Safely without Data Loss.

Compatible with iPhone XS / XR / X / 8/7/6/5/4 and iOS 12.

First of all, go to the official website and download iOS System Recovery to your computer. And then install this software according to the installation. After installation, you can run this software on your computer.

Step 2. Start iOS System Recovery

Now you need to click Tools and select iOS System Recovery to enter the main recovery interface. You have to connect your iPhone to your computer via a USB cable. And then click the Start button to start iOS System Restore. Meanwhile, this professional software will detect your iPhone automatically.

Step 3. Put iPhone into Recovery Mode

After this software detects your device, you need to click on the question icon and follow the guide that gives you to put your iPhone into Recovery Mode or DFU Mode. For example, if your iPhone 5’s touchscreen isn’t working, you can put it into recovery mode.

Then you need to choose the correct iOS model and other information about your iPhone. Then click the Download button to download the firmware. It will take you a few minutes to complete the download.

Step 5. Fix iPhone Touchscreen Not Working

When the plugin is fully loaded, iOS System Recovery will automatically fix iPhone screen not responding. What you need to do is wait for the process to finish.

Way 2. iPhone touch screen not working after being dropped? Force restart iPhone

For most iPhone problems, you can easily fix them by restarting your iPhone.If your iPhone’s touchscreen is not working, you can also use this method to fix it. Because for a reset iPhone, it will return to normal, unless the hardware is damaged.

However, if your iPhone touchscreen still can’t come back from an unresponsive situation, just restart it.

First press the Volume Up button on the left side of the latest iPhones and quickly release. Then press and release the Volume Down button next to the Volume Up button.

Press and hold the Power button on the other side. When the Apple logo appears on your screen, you can release the power button.

Step 3. Enter the startup password and complete the forced restart of iPhone X / 8/8 Plus.

Continue pressing the Power or Sleep / Wake button on the right side of the iPhone 7. Then press and hold the Volume Down button on the left side at the same time.

Step 2. Wait for the Apple logo to appear, release both buttons. Enter your PIN at startup.

Press and hold the Home button and the Power button at the same time.

Step 2. Hold both buttons until the Apple logo appears on the screen of your iPhone. Release the buttons and wait for the startup screen to appear.

Step 3. Log into your iPhone with password.

Then you can check if your iPhone’s touchscreen can work or not.

Way 3. iPhone touch screen not working after update? Restore iPhone

If force restarting iPhone cannot help you solve the iPhone touchscreen not working, you can try to restore iPhone using iTunes because it will update your iPhone to the latest version from iTunes.

To restore iPhone using iTunes, follow these steps.

Note: this method also works to fix water damaged iPhone.

Download the latest iTunes to your computer and launch it. Remember to connect your device to the computer that you previously synced with iPhone via iTunes.

Step 2. iTunes will detect your device and your iPhone will be displayed in the interface. You have to click on the “Device” tab and then select “Summary”.

Step 3. If you want to back up your iPhone now, you can click on that computer and then click “Backup Now”.

button, working, iphone

Step 4. After a successful backup, click “Restore iPhone” and select the backup you made earlier. If you’ve already made a backup, you can click Restore iPhone directly and then click Restore again in the pop-up window to confirm your actions.

Step 5. Just wait for iTunes to restore your iPhone, download the latest iOS software and restore iPhone from iTunes backup.

In this article, we recommend several ways for you to fix iPhone touchscreen not working. You can force restart your dropped iPhone to check if the screen isn’t working. You can restore iPhone to the latest iOS version to avoid touch screen not working after inappropriate update. Of course the best way. use Apeaksoft iOS System Recovery to fix any software-induced problems on iPhone, which can fix this problem completely.

How to reanimate the phone

If on your device the Home button works intermittently and does not always respond to pressing, do not get upset. Once you find the root cause, you can use several methods to restore the Home button to its former functionality. These include the following:

  • calibration
  • changing the position of the keystroke connector
  • dry cleaning buttons
  • displaying the Home button on the main screen using a special program

IPhone Home button not working

And get the best deals from trusted masters.

  • Compare and choose the best conditions
  • Feedback from interested professionals only
  • Don’t waste time communicating with intermediaries

Many apple technology owners are faced with a situation where the iPhone Home button does not work. The Home key in Apple devices is made of glass, which is subject to various influences from the outside. Rough handling of the device or dropping it from a height breaks the Home button on the iPhone. In case of some malfunctions, you can repair the button yourself.

Enabling a virtual button

The above steps allow you to determine the cause of the key malfunction and eliminate the breakdown. If your phone or its button has been exposed to strong physical impact, it will not be possible to solve the problem by dry cleaning, calibration and adjustment. The way out of the situation will be to turn on a virtual button with its subsequent display on the screen of the iPhone smartphone.

To replace a faulty key with a virtual one, you need to go to the settings, find the Assistive Touch section, and connect the function here. A new icon will appear on the screen. When you click on it, a special menu will open, in which you can control the old and new smartphone without the Home key. This method will help with any cause of breakdown.

The chemical method for solving the problem

A common cause of iPhone Home button malfunctions is dirt and dust particles getting inside it. This also happens after liquid, for example, sweet drinks, gets under the body of an old or new smartphone, or if the device is taken with dirty hands. An effective way to quickly eliminate the problem in this case will be the use of chemical cleaning agents. This can be isopropyl alcohol or WD-40. To use this method of troubleshooting, perform a few manipulations:

  • add a small amount of funds to the Home button on the home screen
  • press the button and hold it down until the cleaning agent penetrates inside
  • check the operation Home after the alcohol has completely evaporated

Apply the chemical only to the key, not to the screen. Rough handling of the cleaning agent can break other parts of the phone, increasing the cost of repairing your Apple device.

The main reasons for the failure of the Home key

The Home button can break completely or stop working periodically for a variety of reasons. Most often, the iPhone Home button does not work due to:

  • mechanical damage
  • ingress of moisture inside the case of an Apple smartphone
  • software failure

If the Home key on the iPhone has stopped working, it is most likely that the phone was previously loaded with software or an application of inadequate quality.

The Home button can break after dropping a new Apple smartphone or applying strong pressure to it. There are also situations when the button can break, as a result of which it stops responding to pressing or starts to slow down periodically, after moisture gets inside the mechanism. In this situation, when you press the button, you will hear a creak indicating oxidation of the contacts.

Fortunately for many owners of apple gadgets, problems related directly to mechanical damage and liquid ingress are not so common. Most Home button breakdowns appear due to a system failure. Because of it, the key does not work well, periodically slows down or completely loses its performance. In this case, the terms and cost of repairs will be insignificant.

Check the function of the key

To see if the Home button on iPhone works or not, press it at least ten times in a row. If there is no reaction to at least a couple of clicks, then there is a malfunction that affects the performance of the key.

Features of adjusting the connector on iPhone

If you own an iPhone 4 and 4S and are faced with a button malfunction on your smartphone, do not rush to change it. You can fix the situation by changing the position of the connector. For this:

  • connect the cable that came with your device to the phone
  • push down on the plug where it fits into the connector, press and hold the Home keys at the same time

Now unplug the cable and check to see if the cause of the breakage was eliminated and the button worked. If you cannot fix the problem, you can use another method to restore the functionality of the Home key on the main screen.

Manual connector adjustment

Here you need a standard USB connector connected to the phone. It can be used to restore the position of the button control plate. For this:

  • We connect the cable to the connector;
  • We put our finger on the bottom of the plug;
  • Carefully move the plug up and down while pressing the Home button.

If the process proceeds with soft clicks and without delays, then the adjustment can be considered complete.

Removal of contamination

Dust particles can damage the elements of the Home button and prevent them from working properly. To get rid of them, you need a special aerosol (WD-40), and the cleaning itself is carried out as follows:

  • Apply a few drops of the product around the Home button;
  • Continuously press it 10-15 times to distribute it evenly over the mechanism under the key.

But remember. Literally 2 drops of lubricant are enough. Its excess can provoke smudges and oily spots.

Home button not working on iPhone

On most Apple mobile devices, the Home button is responsible for several functions at once. With this interactive element, you can minimize the applications in use, turn on the display and unlock the gadget. The exact list of tasks to be solved depends on the device and its version.

Structurally, the button is represented by a set of mechanical and electronic components that are connected to the control board by means of a special loop. As the operation progresses, the operation of the module becomes less and less reliable; it does not respond to the commands being given or does not work correctly. Why does the Home button on the iPhone not work, what are the reasons for the breakdown and what to do in this or that situation? Let’s consider the problem itself and its solution in more detail and in detail.

Troubleshooting options

Troubleshooting the Home button can be done in a variety of ways. The choice of a specific one depends on the complexity of the breakdown and its root cause. Let’s consider the main options and talk about the features of each of them.

Software calibration

  • We turn on the smartphone and select an arbitrary application;
  • We start it and hold down the Power button until the menu for turning off the device appears;
  • Hold the Home button for about 5-10 seconds (until the shutdown message disappears from the screen.

The main causes of breakdown

If we talk about the most common provoking factors, then they are as follows:

  • Liquid trapped inside the housing. It is moisture that very often provokes the breakdown of this button and its failure. Despite the moisture resistance of some models of smartphones from Apple, experimenting with its effectiveness is still not worth it. After all, moisture-damaged contacts require a serious and very time-consuming intervention;
  • Mechanical impact. Another fairly common cause of home button problems. A strong blow or a fall from a considerable height may well result in partial or complete damage to the module;
  • Natural wear of the button. With prolonged and overly active use, such a problem is considered quite commonplace.
READ  IPad activation lock what to do

Also, the button may fail under the influence of other provoking factors. In some situations, users note the appearance of problems with this module during prolonged exposure to frost and in high humidity conditions. Excessive pollution, which requires the most careful and careful removal, does not in the best way affect its performance. And you should not forget about software problems. Failures can be caused not only by outdated or incomplete firmware, but also by the influence of third-party applications.

Button duplication

In case of mechanical damage to the module, you cannot do without replacing it. As a temporary alternative, you can use AssistiveTouch. an application that duplicates commands and gestures. For this:

  • Go to the “Universal Access” menu block;
  • Selecting the Assistive Touch option (category “Physiology and motor skills”).

The virtual analogue of the Home button can be moved arbitrarily on the display. If necessary, it is possible to add a command to some gestures. This way of solving the problem is temporary and nothing more.

You should not delay contacting specialists. You should also refrain from trying to repair yourself. Indeed, with unskilled intervention, the risk of aggravating breakdown increases significantly. Entrust the restoration of the gadget to us. the Apple SC has the latest diagnostic equipment, we will promptly localize the malfunction and fix it just as quickly. A 100-day guarantee will be a pleasant addition to our work.

Workaround for not working power button on iPhone

There are many instructions on the Internet about “How to fix the iPhone lock button”, but almost all of them deceive users and boil down to a temporary replacement of the button with an iOS software feature.

Apparently, the Cupertinians initially knew that the problem with the buttons was quite possible, and added the AssistiveTouch item to the Settings General Accessibility.

After activation, a square button appears on the iPhone screen, which has many functions.

One of the features is called Screen Lock (found in the Device subcategory) and essentially acts as the iPhone lock button.

Actually, this is a temporary solution, which many are successfully using. Naturally, the physical button will still be inoperative and in order to really fix it, read the next paragraph.

IPhone Lock (Power On) Button Does Not Work. Anatomy of a Breakdown

Hi. It’s time to tell you my story about breaking the iPhone lock button. You will laugh, but I still have an old iPhone 4S brought in by an employee from Canada. My iPhone has served for 4 years and still works flawlessly.

True, there was one case when the POWER button simply stuck (stopped pressing) and I could not use the phone normally. Today I will tell you how to overcome this fairly common disease. This story is from the happy end series So read the article until the end.

I was not the first and will not be the last iPhone user to encounter broken iPhone buttons. In this case, there are cases of failure of both the lock (power) buttons and the volume buttons (plus or minus). It is also worth noting that the buttons break on absolutely all iPhone models.

  • How to replace the iPhone screen with your own hands. instructions

What leads to their failure? It is difficult to give an unequivocal answer here It may be the iPhone‘s fall on one of these buttons, or it may be pressed hard, or it may be just a marriage or poor-quality iPhone components.

Having found myself in a situation where one of the most strategic buttons on the iPhone stopped pressing, I decided to get to the bottom of the problem and fix the lock button on my own. Well, or at least try to fix it In the next paragraph about this in more detail.

Why iPhone Lock Button Doesn’t Work

Why does the lock button get stuck on some less fortunate devices? The answer lies in the depths of the iPhone and is associated with the “physiology of the structure” of the button mechanism.

The button itself (what we see on the end of the iPhone) cannot break as it is just a piece of aluminum. But under the button there is a so-called loop with miniature spring contacts, which fail.

The picture above shows a spring-loaded contact with a small black plastic “pimple” in the center. It is this very pimp that is the cause of all troubles.

The fact is that over time (perhaps after a strong pressure or blow) this small black bump may crumble or fall off, and without it the button will no longer function.

That’s the whole breakdown. Now the matter is only in the way of repair. It all depends on how much you are willing to fork out or maybe you yourself want to make repairs.

IPhone Lock Button Repair

Let me remind you that the lock button stopped pressing after a small plastic bump crumbled (fell off, etc.) Well, you remember (see the photo above).

There are only two options to troubleshoot this problem:

  • replace the whole train
  • repair the existing loop

You can replace the loop on which the lock button is located at the service center, or you can do it yourself. If you are straight-handed enough and you have the necessary tools, you can try to save money.

The iFixit.com website contains detailed instructions with photographs for disassembling almost all Apple equipment and not only. You can buy a flat cable for your iPhone model in China on AliExpress.com (or another website), but from personal experience I can say that a spare part MAY come initially inoperative.

The fact is that on the same loop with buttons there are also other elements. sensors or switches.

Apparently, the Chinese are not very good with quality control yet So I bought a cable to replace the volume buttons on the employee’s iPhone 4S (the “” button did not work for him).

According to the instructions from the site iFixit.com made a replacement (it took about 1 hour in time), and as a result I got a working button “”, but not working “-“ and a headphone jack.

Fortunately, I did not damage the original cable during disassembly. I had to install it back and resort to the option to repair the original loop.

Repair of the loop, or rather the spring contact of the button, consists in restoring the microscopic tubercle. What have I done? I took a sharp blade and cut a bump from the Chinese train, and then glued it with “superglue” in the right place on the original train.

It is necessary to be extremely careful and precise in your movements, because the parts are really VERY tiny.

I bought ten spring contacts on AliExpress and now use them as donors to get plastic tubercles.

This is how I restored the power button and volume button “” in two different iPhone 4S. ATTENTION: If you have never repaired anything in your life before, it is better to contact a specialist.

Well, and “a photo on a horse” The operation was successful, the patient was satisfied

Subscribe to updates using the form below. We will be repairing not such things soon. Well, if you have learned something useful, be sure to share with your friends on social networks.

Causes of malfunction

There are only a few buttons on Apple smartphones. The main is the power button. It is she who is responsible for ensuring that you can turn on the device and begin to operate it. You also have to press it to lock and unlock the screen.

A broken button on an iPhone can be caused by the following reasons:

  • mechanical damage
  • failure of the loop (then a new loop is needed)
  • liquid entering the device
  • button droop
  • software failure in the operating system without visible damage to the button

The button can sink and stop working after a strong press, so you should not make great efforts when turning on or locking the screen and press hard.

With a faulty “Power” key, you can use the iPhone for its intended purpose, but the comfort of use will greatly decrease.

What to do if you need to turn off your phone

If the power key breaks down and stops working, and you need to turn off your smartphone, you can use several methods. There are two effective ways:

  • wait until the battery runs out and the smartphone turns itself off
  • turn off your phone using Assistive Touch

To find Assistive Touch on your phone, go to Settings, then General and find Accessibility, where the tab you want is located. Find there an icon labeled “Apparatus” and click on it. You will see the item “Screen lock” in the settings. Long and strong pressing on this icon will turn off the device.

How to turn on your smartphone

When the button is broken and the smartphone does not work, but it needs to be turned on urgently, there is only one proven method. To do this, you need a power outlet and an iPhone charger.

  • connect your smartphone to the charger
  • plug the charger into an outlet
  • wait 10-20 minutes if the battery was completely discharged

Connecting the switched off iPhone to the charger will trigger the device to turn on. If this does not happen even after 20 minutes of charging, and you see a black screen, you should exclude the breakdown of accessories. Check to see if the socket, wire or charger itself might be broken. Sometimes the cause of the problem lies in them.

Sometimes you can try a hard reboot. To do this, you need to simultaneously hold down the Power button and the Home button. You must hold the button for 12-20 seconds until the Apple logo appears on the black screen. This method cannot work with a faulty button, especially if it is deformed or does not work due to mechanical damage.

Power button not working on iPhone

And get the best deals from trusted masters.

  • Compare and choose the best conditions
  • Feedback from interested professionals only
  • Don’t waste time communicating with intermediaries

If the power button on iPhone isn’t working, you can still turn the device on and off using some tricks. A non-working “Power” button on a smartphone can cause a number of inconveniences, so this problem should be solved as soon as possible, especially if the breakdown has occurred due to mechanical damage.

But if you urgently need to turn on the iPhone, and the button does not work and you cannot press it, use our recommendations.

How to fix a key

All the above recommendations for starting the iPhone if the faulty Power button does not work are a temporary solution to the problem. If the button on the iPhone breaks down due to mechanical damage, software failure of the operating system, you should contact an experienced technician who offers an affordable repair cost.

You will also need the help of a repair specialist if the button starts to sink after pressing hard. Self-intervention will only make the problem worse.

A technician with a low cost of repair will conduct a thorough diagnostics of the device in order to determine what caused the key to break. Specialists provide the following types of repair services:

  • replacement of the loop
  • replacing the button itself on the iPhone
  • elimination of software failure of the operating system

A new loop after mechanical damage or moisture ingress will eliminate the problem of the faulty button. Also, the wizard will perform all the necessary settings if the button breaks down due to a software failure and it does not work. The cost of the repair depends on the phone model and the reasons why the key refuses to work. Do not press the key hard after replacement to avoid re-damage.

If the power button on your iPhone isn’t working, you can’t fix it yourself. Replacing the loop and other elements is performed only with the help of the wizard. Order the services of masters with a low cost of iPhone repair through the YouDo service by filling out a simple application.

Now you know what to do if the power button on the iPhone does not work, and you urgently need to use it.

Button not working on iPhone

DIAGNOSE YOUR COMPUTER BREAKAGE

Brand guarantee

We provide a proprietary warranty for the work performed and spare parts used in the repair

A person is constantly faced with various kinds of difficulties, and often these are breakdowns. Nobody is safe from them, this also applies to new electronic devices such as the iPhone. And the more the popularity of this device becomes, the more in demand the service for its specialized repair becomes. The main thing after a breakdown is to know where to go to solve the problem. The “Positive” iPhone service center is always happy to help you with any malfunction in the iPhone.

I can’t exit my app. Home button not working. Here is your first step

READ  How to remove empty tag on Honor 8a

After preliminary diagnostics, the employees of our center will quickly determine the cause of the malfunction. For example, is a button not working on an iPhone? There can be many reasons, as well as malfunctions caused by them. If the button stops working, this may be due to the fact that the phone has been in water, received a shock, overheated or frozen, etc. The main reason is the oxidation of the button contacts due to moisture or other liquid that has got on them. If the button on the iPhone does not work, you may need to replace the flex cable, and if the case is serious, then repair the motherboard.

For repair, our service uses only high quality components purchased from reputable suppliers, which significantly increases the warranty period of the repaired iPhone.

Urgent diagnostics

Laptops, computers, tablets, netbooks, smartphones.

Button still doesn’t work on iPhone?

The question why the button stopped working on the iPhone is one of the most frequently asked in service centers. And this is not surprising, considering how many times the button was used per day or month. Basically, the Home button is hit. If the home button on the iPhone is out of order, then, in addition to the above-described reasons, the problem may be certain system failures, as a result of which the button is sticking on the device.

The home button may also not work due to outdated components that are out of order, then you just need to replace them with new ones. If you encounter one of the problems mentioned, then immediately contact our service department, which will solve your problem within an hour without damaging the existing components.

Apple Service Centers

Let’s take a look at how to fix the problem of a broken button.

To get started, use the simplest and most obvious way. just restart your phone. This will save you from problems “inside” the phone and possibly “resurrect” your button.

If this simplest method did not work, then most likely your button does not work due to physical. wear and tear. In this case, it will not be possible to fix it at home and on your own, since there is only one way out. replacing the button in the service.

Also, it is in the service that other causes of the malfunction are solved. Namely, contamination of the loop or damage to it from the outside. If the plume is dirty, you can still try cleaning it at home using rubbing alcohol. With a cotton swab on which the product is applied, wipe the plume from dust, dirt and other elements. This should be done with the utmost care as there is a chance of damaging your iPhone. If the loop is physically damaged from the outside, then you need to contact the service center.

Can you fix iPhone button by yourself? Now we will try to answer this question. Of course, if you are good at technology and you are not at all afraid of damaging your phone, or maybe even breaking it forever, then you can try to fix the button yourself. In any case, the main problem for self-repair is identifying the malfunction. At home, the nature of the problem is rather difficult and problematic to determine.

Button not working on iPhone

If any of the active mechanical buttons starts to work every other time, then this is clearly a wake-up call that soon it will come into complete malfunction. Consider, for what reasons, the button does not work on the iPhone.

First of all, the problem may be in the wear and tear of the device. After all, if you have been using the same phone for three, four or even five years, then it is likely that some kind of malfunction will occur. This can happen with buttons. ordinary physical wear and tear.

Another reason may be contamination or physical damage to the loop of contacts. In the event that dirt, water has somehow got under the button, or you simply often dropped the phone, then the loop may not work.

Also, the least common problem is a malfunction inside the phone. namely, incorrectly installed software or simply “marriage”.

CYBERMAY. discounts up to 90%

IVESTORE IE Mkrtchyan Gagik Egievich INN 772157254385 PSRN 316774600321511 Moscow, Privolnaya, 61k1

What to do if the vibration button does not work on the iPhone (no sound)

Very often, when we are at official events, in lessons, lectures or meetings, we need to quickly switch the phone to silent mode. For this, iPhone designers have come up with a convenient button on the left side of the smartphone. When activated, all driving calls and SMS will only vibrate and will not distract you and those present with calls. Agree. it is very convenient and useful.

But even such a simple part of your iPhone as the Mute button can break in a moment. It may not work physically (you cannot move the slider to the desired position) or not perform its functions (the mode does not change when you move the slider). All this can be easily fixed by contacting the FixLab service center. Our engineers identify the following reasons for the breakdown of the vibration mode button in the iPhone:

  • Mechanical damage: falls, shocks and other troubles;
  • Filling the phone with water;
  • Operational wear;
  • Installation of jailbreaks and other pirated software;

All this can lead to damage to the thin and sensitive loop of the Mute button. For example, water can cause oxidation to form on the cable itself or on its connector on the board. And in especially advanced cases, even rotting of the conductive tracks on the train. Mechanical stress most often leads to rupture of the loop or damage to the button mechanism itself.

If you begin to notice any inaccuracies in the operation of the switch to silent mode, try to solve the problem yourself. First, check which mode is set on the iPhone now. Then try hard resetting your smartphone. This should fix the problem if it is software related. Also, it will not be superfluous to update to the current iOS.

If the aforementioned “procedures” did not help you, then you should contact the nearest service center. Engineers will carry out accurate diagnostics and find out why the mode switch is not working. And they will offer solutions to the problem. In the FixLab service center, such diagnostics and repair of the vibration button in the iPhone will not take more than 40 minutes.

The loop is responsible for the operation of the volume and vibration buttons

Usually, in the event of such a breakdown, replacing the volume and vibration button cable completely helps restore the iPhone’s performance. Since it is he who often fails. In rare cases, we do not replace, but restore the native loop. It all depends on the degree of damage.

Home button not working on iPhone how to display

There are still several ways for problems to arise. You just need to press the buttons with your own hands without the need to reboot the device.

Home button not working on iPhone and iPad after updating to iOS 12

One of the common problems that happen with iPhones and iPads is that the home button does not work on the iPhone 4 / 4s / 5 / 5s / 5c / 6 / 6s / SE / 7/7 Plus, or the home button does not respond to pressing and is pressed itself. And today we will find out why the home button on the iPhone does not work, what to do if the Home button on the iPhone or iPad does not respond to pressing, and how to restart the iPhone if the home button is pressed badly.

iPhone 6 / 6s / Plus: Home Button Stuck, Sticky, Unresponsive, Wont Work, Broken- 3 Fixes!!!

How to restart iPhone if the Home button is pressed badly

Tenorshare ReiBoot will help you fix your Home button problem with one click for free. Entering and exiting recovery mode can reboot your device and reanimate the Home button. Follow these steps:

Download and run Tenorshare ReiBoot on your computer (Windows or Mac), and connect your smartphone to your computer.

Click “Enter recovery mode” and enter the device into recovery mode, a lace and an iTunes icon will appear on the screen.

After that, click on the “Exit recovery mode” button, and the iPhone will reboot, the Home button will start working.

over, the program is able to get out of any freeze, for example, freezes on the apple logo, freezes in recovery mode, freezes when updating the firmware, freezes when you call, reboots cyclically, black and blue screens, etc. The utility will allow you to solve most of the errors in the system without losing data.

Standard 30-pin cable

  • Insert the plug of the USB cable into the connector of the iPhone or iPad;
  • Place your finger under the plug located in the connector;
  • Gently press your finger on the connector in the “Bottom-Up” direction and press the Home button.

Why iPhone home button doesn’t work

In addition to updating to iOS 12, if we talk about the reasons for the failure of the Home button in iOS devices or it works with some lag (sticking), there are 3 reasons that can be distinguished: 1. Software glitches 2. Mechanical damage. 3. When the Home button “sticks”, clicks, sticks, does not work well or does not work at all.

Other ways to repair the Home button

If the previous methods did not help, but you will have to contact the service center to replace the button and cable with new ones, after which the Home button starts working like a new one.

What to do if the Home button on iPhone doesn’t work

Restart iPhone

This method makes sense to apply only if you own an iPhone 7 or newer smartphone model. The fact is that these devices are equipped with a touch button, and not a physical one, as it was before. It can be assumed that a system failure occurred on the device, as a result of which the button simply stuck and stopped responding. In this case, the problem can be solved easily. just restart the iPhone.

Re-flashing the device

Again, a method suitable exclusively for apple gadgets equipped with a touch button. If the reboot method does not work, you can try heavier artillery. completely reflash the device.

    Be sure to update your iPhone backup before starting. To do this, open the settings, select your account name, and then go to the “iCloud” section.

Select the item “Backup”, and in the new window, tap on the button “Create a backup”.

Read more: How to put iPhone into DFU mode

  • When iTunes detects the connected device, you will be prompted to start the restore process right away. After that, the program will start downloading the appropriate version of iOS, then remove the old firmware and install the new one. You just have to wait until the end of this procedure.
  • What to do if the Home button stopped working

    Below we will consider a few recommendations that will allow you to either bring the button back to life, or do without it for a while, until you resolve the issue of repairing your smartphone at a service center.

    Button development

    Many iPhone 6S and lower-end users know that the Home button is a smartphone’s weak point. Over time, it starts to work with a creak, may stick and sometimes not respond to pressing. In this case, the well-known aerosol WD-40 can help you. Sprinkle a small amount of the product on the button (this should be done as carefully as possible so that the liquid does not penetrate beyond the gaps) and begin to click it repeatedly until it responds correctly.

    Button duplication

    If it was not possible to restore the normal operation of the manipulator, you can use a temporary solution to the problem. the software backup function.

      To do this, open the settings and select the “General” section.

    button, working, iphone
  • Activate this parameter. A semi-transparent replacement of the Home button will appear on the screen. In the “Configure Actions” section, configure the commands for the “Home” alternative. To make this tool completely duplicate the familiar button, set the following values:
  • One touch. “Home”;
  • Double tap. “Program selector”;
  • Long press. “Siri”.
  • If necessary, commands can be assigned arbitrary, for example, long-term holding of a virtual button can create a screenshot.

    If you could not reanimate the Home button on your own, do not delay going to the service center.

    In addition to this article, there are 11,998 instructions on the site. Add Lumpics.ru to your bookmarks (CTRLD) and we will definitely be useful to you.

    Thank the author, share the article on social networks.

    BYRGPUB.COM 2021