How to bring the shutdown button to the desktop on Windows 10

There are situations when a couple of seconds are left to turn off a computer or laptop. And this is where the fun begins: the system takes a long time to respond and the Start menu does NOT open immediately. And then you also need to press the shutdown button. Of course, this is most often found on weak computers. As for the owner of a PC or laptop with good performance, you may just be too lazy to click several times to perform such a simple action. And you must admit that it is much more convenient if such a shutdown button is somewhere at hand.

So, in this article we will figure out how you can solve this situation. Now I will tell you how to bring the shutdown button to the desktop on Windows 10. I will give a list of commands that will help you put your computer to sleep, log out or restart it. For those who find it more convenient to use the taskbar, I will explain how to pin the created shortcut to it. Well, as an addition, I’ll show you how to change the appearance of the shortcut and set a suitable icon for it.

The site already has an article on how to create a shutdown or restart button. You can follow the link and read it. As for all the recommendations below, they can be safely used in earlier versions of Windows: XP, 7 or 8.

Create a shutdown shortcut

To make the Windows 10 shutdown button, you need to add a new shortcut to the desktop and tell him what he should do. To do this, right-click anywhere on the desktop and select “Create” from the context menu. “Label”.

Then you need to specify “Location.” That is, which program should be launched after clicking on the shortcuts. In our case, enter shutdown.Exe / s / t 0. A button with this command will instantly turn off the device. Click “Next”.

If you need to reboot the system, insert the shutdown.Exe / r / t command 0 To log out, you need the shutdown.L command. To click on the button to put the computer to sleep, insert rundll32.Exe powrProf.Dll, SetSuspendState 0,1,0 into the line. Be sure to make sure that hibernation is disabled, because if it is active, then the created button will send the PC to hibernation, and not to sleep. But if hibernation is disabled, then the computer will simply fall asleep.

At the next step, specify what the created button will be named and click “Finish”.

Change the appearance of an icon

So, we figured out how to create a shutdown shortcut. Now let’s change its appearance so that it is clear what it is for. To do this, right-click on it and go to “Properties”.

In the window that opens, we will need a button “Change icon”.

Maybe a warning window like this will appear. Just click “OK” in it.

Then select a suitable image from the list provided and click “OK”.

If you, like me, want the computer shutdown button on the desktop to look original, download the picture on the Internet. Please note that its format must be.Ico. And do not forget to transfer the downloaded image from the “Downloads” folder to any other, so as not to accidentally delete the Ego. I downloaded the image from here: https://icon-icons.com/ru/Search/icons/?Filtro=son. Please note that you need to download the selected image with the correct extension.

Now you need to specify the folder in which the picture was saved. To do this, click the “Browse” button.

Choose a folder and highlight the image. As you can see, my icon is stored in downloads, but it’s better to move it to another daddy. Then click “Open”.

In the already familiar window, highlight the icon and Save changes.

In the properties of the shortcut, it will already be seen that the picture has been changed. Save everything with the “OK” button.

As you can see, adding a shutdown button to the desktop in Windows 10 is very simple. And if you wish, you can change its appearance.

Docking a button to the taskbar

Those who actively use the Start button and Metro interface can add the button to the home screen. To do this, right-click on it and select the appropriate item.

Now, if you just click on Start, you will see it among other tiles.

Also, you can add the shutdown button in Windows 10 to the taskbar. Select the required item from the context menu.

The shortcut will be pinned to the taskbar, and you can move it with the mouse to the desired location. Now it will be enough to simply name the button to turn off (or restart) a computer or laptop.

How to make a timer shortcut to shutdown

Created as described above, the shutdown button in Windows 10 will instantly perform the action that you specified to it. If you want the computer to turn off NOT immediately, for example, watch a movie and know that you will fall asleep, then you can create a computer shutdown timer shortcut.

There is a separate article on how to set the timer to turn off the PC. But the created shortcut can be slightly edited. Therefore, right-click on it and go to “Properties”.

Then notice the term “Object”. There will be a path to the program that will shutdown or restart the computer. You need to change the number at the end. Initially I had “0”. I change it to “30”. this means that the computer will turn off 30 seconds after I click on the shortcuts. Save changes.

Please note that the time must be specified in seconds. For example, 15 minutes. that’s 900 seconds and 1 hour. it’s 3600 seconds.

As you can see, creating a shutdown button for Windows 10 is a very simple task. It all comes down to the fact that it is enough to make a shutdown shortcut on the desktop and point it to the correct command. But after that you don’t have to perform several actions with the mouse to turn off the PC.

How to display a site shortcut on the desktop

Hello, friends! I think that every computer owner has already decided on a list of programs that he most often uses. And the operating system helps to get quick access to them, group recently launched programs in the menu.

But most of the users prefer that the button to launch their favorite application is always at hand. And they make shortcuts to programs on the desktop. Therefore, over time, their desktop simply becomes cluttered with a bunch of icons, among which you can get lost.

Social networks are very popular with us today. So for the younger generation, there are problems to quickly log into your account of any social network, which cannot be said about the older generation. And a simple solution to this difficulty can be a shortcut to a personal page from a social network on the computer desktop.

Label. it is an icon (icon) that is associated with an Internet address or program, folder on the computer. Double-clicking the left mouse button on it starts the program or opens a page from the Internet in the browser.

READ  How to Improve Webcam Video

How to make a website shortcut to the desktop

There are several ways to create shortcuts. But the easiest one is Drag and drop the page address from the browser to the desktop.

First Resize the browser window so that at least a small part of the desktop is visible.

Click on the address bar of your browser to highlight the address of a web page. Then on the selection, hold down the left mouse button and drag to the Desktop.

The shortcut will take the form of a browser icon, which is your main web browser. When creating several such labels, they will all look the same and can only be distinguished by their name.

To make the icon images different, you need to change the icon icon.

Beforehand, these icons must be saved on your computer in a specially ICO format. I have prepared some icons, see the picture below. Files of ready-made icons can be taken here.

Download and unpack the archive, for example, to the Images folder.

Setting the icon image

Select the shortcut you want to change. Right-click on it and select Properties from the list of commands that opens. Next, the properties window of the selected shortcut will open. On the General tab, you can change its name.

On the Web Document tab, select Change Icon. A window with the icons of your program will open (you can also choose from them). Click Browse and open the folder with the icon.

Select the one you want and click Open. An image of the selected icon will appear in the Change Icon window. Now click OK and OK in the Properties window.

That’s it, now the shortcut has a clear graphical icon.

How to display shortcuts (icons) on the desktop. How to display a shortcut from the All Programs menu

For example, let’s display the shortcut of the Word program on the desktop.

Press the Start button 1. Then move the cursor (do not press the mouse buttons) on the All Programs menu 2. A list of programs installed on your computer opens. Use the arrow to go to this list and hover the cursor over the folder you need. Microsoft Office 3.

A list of programs included in Microsoft Office will open. Move the cursor to the program we need: Microsoft Office Word 2003 4

Now, hover over Microsoft Office Word 2003, right-click.

A context menu will open in front of you.

Releasing the right mouse button, move the cursor to Send 5. The case will open a submenu in which you select Desktop (create a shortcut) 6 and press the left mouse button.

That’s it, now you can admire the program shortcut that appears on the desktop and run Microsoft Office Word with it.

If you DIDN’T find the program you need in the Windows Main Menu

But sometimes you can’t find the program you need in the main menu (someone accidentally or deliberately removed the shortcut). Do not despair, this is fixable. If the program is on the computer, then you need to find the program that launches the file and display a shortcut from it on the desktop.

For a Word text editor, the path will be like this. Using Windows Explorer or Total Commander file manager, find the Program Files folder in it. The Microsoft Office folder, then Open the OFFICE11 folder and find the WINWORD.Exe file in it

On the found file, right-click to call the context menu, and then proceed in the already tested way. Do the same with any other program. Find its folder in Program Files, then find the file in the folder that launches the program (Most often it has the.Exe extension, but there are others). If I don’t immediately understand which file launcher. Try to run it by double clicking. If the program starts. So everything is correct, this is the main file. Outputting a shortcut from it to the desktop using the method shown above.

Note: You cannot delete anything in the Program Files folder with the Delete button. Otherwise, the program in this folder will stop working!

How to rename a desktop icon

If you do not like the name given to the shortcut by the Windows program, for example, Shortcut to Word, you can change it.

To do this, hover the cursor over the shortcut (icon), right-click the context menu and select Rename. Immediately, the text of the label under the label is highlighted and you can delete the words “Label for” or completely rename the label. After that, be sure to press the Enter key. Only then will your name be preserved.

Paying attention. That such actions (rename, delete) can only be performed from the shortcut (they have a little black arrow in the lower left corner of the shortcut). Files of programs located in their folders in Program Files cannot be renamed! Otherwise, they will stop working. You can only deduce labels from them, and from the label do what you want!

How to display a site shortcut on the desktop

A site visitor asked me a question: “How to display a site shortcut on the desktop?” At first I thought that there was no point in this, because links could be placed in Favorites. After clicking on the shortcut, the web browser starts, and the site opens at the same time (two actions at the same time). How can you create a shortcut on your desktop for your favorite site, which you open daily? his help.

So, open Internet Explorer, open the desired site in it. Now in the File menu, move the cursor to the Send link, then to the right and click the Shortcut to the desktop link. That’s it, the shortcut (icon) is already on the desktop. You can check!

How to bring Yandex Browser to your desktop

Using a browser shortcut on the desktop allows the user to quickly and easily access the Internet. But, the icon does not always appear automatically. Then the question arises, how to bring the Yandex browser to the desktop? After reading this manual, you will find answers to your questions.

On the computer

There are several ways to achieve this goal, but I will tell and show 2 of the simplest of the existing ones. If you follow my instructions, then you will definitely succeed.

How to display a browser shortcut

  • Initially, you need to open “Start” by clicking the left mouse button. There click on the line “Find programs and files”
  • In this line we type “Yandex” and find the icon we need.
  • Right-click on it and select the send section. In it we find the item “Desktop” and click on it LMB.
  • Done! After THESE actions, the Yandex browser icon will be displayed on the desktop of your PC.

Second way:

  • You need to start as in the first method: open “Start” and type “Yandex” in the line.
  • After that, we find the Yandex browser icon and “grabbing” it with the left mouse button. Drag it to your desktop. The action will be completed when a blue arrow appears next to the icon. If the red cross is on, then the transfer will NOT work. Choosing free space on the main screen.
  • Done! If all actions are performed correctly, the icon will be transferred.

How to add a website to your desktop

Simple and affordable way:

If you do not need the browser icon itself, but only its website, then use the following method:

  • In any free space on the desktop of our personal computer, right-click. Select the item “Create” and click on “Shortcut”.
  • In the window that opens, you will need to specify the address of the object location. Since we need a Yandex site, then indicate the link “https://www.Yandex.By/” and click “Next”.
  • The next step is to come up with a name for the shortcut. But we don’t need to invent anything, we will just call it “Yandex”, so as not to get confused in the future.
  • As all actions are completed, click on the line “Finish”. Now called several times in the shortcut, you can make sure that everything was done correctly, as the Yandex site will open.

On the phone

This operation is as simple as shelling pears. You just need to follow a few simple steps:

  • Open the list of all programs and find Yandex there.
  • Finger “grabbing” the browser icon, and drag it to the desired place.
  • That’s all. I release our browser and it remains on the main screen of the smartphone.
READ  How On Toshiba Enable WEB-camera

Yandex browser icon missing from the desktop. it doesn’t matter. It is very easy to return it, you just need to follow the methods from my instructions. Thanks to these methods, you can easily display the Yandex browser icon even on a computer, even on a phone.

How to set Google Chrome shortcut to desktop

The popularity of the Google Chrome web browser is due to its functionality and fast processing speed. Of course, without a good operating system, he would not be able to achieve such high results, and the question immediately arises about the convenient use of the browser.

For example, in Windows 10, the browser can be placed anywhere and run without any problems. Thus, you do not need to waste time searching for a browser, but launch it immediately when you turn on the computer.

If you have any difficulties with the location of the browser, then. Today we will talk about how to install a Google Chrome shortcut on the desktop in various ways.

Windows 10

There are 2 main ways to place any icon in Windows 10: in the Start menu and using the “send to desktop” function of an already prepared shortcut. How this can be done will be discussed in the following sections.

Through the start menu

In this method, we will open the start menu and move the ready-made browser shortcut from there to the desktop. We will use the instructions below to do this:

  • Click in the lower left corner on the Windows logo to open the Start menu.
  • We find the shortcut of the Google Chrome browser and clamp it with the left mouse button. Then, with the button held down, we transfer it to the desktop.
  • Now there is a browser shortcut on the desktop, which you can conveniently use.

In the same way, you can move the shortcut to any folder, if necessary.

Via the “Send” option

In order to use the “Send” option, just open the location of the main shortcut and name it with the right mouse button. By default, the Google Chrome browser is located in the following directory: C: \ Program Files (x86) \ Google \ Chrome \ Application.

So, first open the location of the main Google Chrome file and go to the next instruction:

  • Find the Google Chrome shortcut in the main browser folder and right-click on it. Then select “Send” and click on the button “Desktop (create a shortcut).
  • Next, go to the desktop and check if a new shortcut for the browser has really been created there. If so, then congratulations, you learned how to add a shortcut in another way.!

Windows 7

  • To do this, click on the “Start” icon located on the Taskbar and in the window that opens, click on the “All programs” term.
  • The next step is to click on the “Google Chrome” folder.
  • Then one right-click on the shortcut of the program “Google Chrome”. In the window that opens, hover the cursor over the “Send” term, then click on the “Desktop (create a shortcut)” column.

This concludes our article, thanks for your attention! We hope you now know how to create a Google Chrome desktop shortcut.

How to set an Internet Explorer shortcut to your desktop

Today we will see how to install the Internet Explorer browser shortcut on the desktop using possible methods. By default, Internet Explorer is located in a special folder on the system. This arrangement is not always convenient for the user, since several actions must be performed each time to launch the browser.

For such cases, Windows provides a desktop that includes various program shortcuts. Thus, if you display the browser on the desktop, it will noticeably speed up its launch time.

Add an Internet Explorer shortcut to the desktop

Windows 10

Win 10 has several options for adding a web browser to the desktop. This is creating a new shortcut, moving a shortcut out of a folder or Start menu. Instructions for each method will be demonstrated below.

Create a new shortcut

Let’s start with the easiest and most convenient way. creating a shortcut on the desktop. In this method, you will learn how to create a new shortcut Not only for the browser, but also for any other program or folder of the operating system.

To do this, use the following instruction:

  • Move to the desktop and create a new shortcut.
  • Next, enter the following entry in the query string: C: \ Program Files \ Internet Explorer \ iexplore.Exe.
  • Here we set the name of the shortcut, you can name it whatever you like. it will function under any name.
  • Congratulations! The shortcut is created and you can use it.

Via browser directory

The Internet Explorer shortcut, like any other program, is stored in a special folder, from where it can be sent via the menu to the desktop. This can be done in the following way:

  • Launch the “Start” menu on the computer, enter the query Internet Explorer.
  • The next step is to click on the browser shortcut and open its original location in the system.
  • Next, click on the browser shortcut, select “Send” and place it on the desktop.
  • After that, a new shortcut will be created on the desktop.

This way you can move any programs or folders to your desktop.

Through the start menu

And the last way to tell. it is adding a shortcut to the Start menu. To do this, we need to open the start and move the browser shortcut from there to the desktop. Let’s see how it looks in practice:

  • We open the start on the computer and find the folder “Standard. Windows “. we open it.
  • Next, we find Internet Explorer and clamp it with the left mouse button. Then we transfer it to the desktop and release the mouse button.
  • The browser is now on the desktop and can be used without any difficulty.

You can also move the shortcut from the “Start” to any folder and open the browser through it.

Windows 7

  • Start by clicking the “Start” button, then click the “All Programs” term.
  • Find Internet Explorer in the list of programs and click on it with the left mouse button, then in the context menu, hover over the “Send” term.
  • In the window that opens, click “Desktop (create shortcut)”. Shortcut created

Now you know how to install the Internet Explorer browser shortcut on your desktop. We have discussed several methods, but we advise you to use the first method, as it is more convenient due to the ability to specify the name of the shortcut. Good luck in learning!

Create a YouTube shortcut on your desktop

The popular video hosting YouTube is in the browser bookmarks of a fairly large number of users, so they can go to its page in just a few clicks, do not enter the address manually and DO NOT use the search. You can get even faster, and most importantly, convenient access to a branded web service in Google if you create a shortcut to it on your Desktop. How to do this, and will be discussed further.

Adding a YouTube shortcut to the desktop

There are two ways to create a shortcut for quick access to a site. The first involves adding a link to a page on the Desktop, which will open in a new tab by double-clicking. The second allows you to place in this area a certain analogue of a web application with a beautiful favicon icon. importantly, in this case, the launch will be carried out in a separate, independent window with its own icon on the taskbar. So let’s get started.

Quick Launch Link

Any browser allows you to place links to web pages on the Desktop and / or taskbar, and this is done in just a couple of mouse clicks. In the example below, Yandex.Browser will be used, but in any other program, actions are shown are done in the same way.

    Launch the web browser you are using as the main one and go to the page of the YouTube site that you want to see in the future when you launch the shortcut (for example, “Home” or “Subscription”).
READ  Can I Use My Phone As A WEB Camera

Click the left mouse button (LMB) on the address bar to select the link specified in it.

bring, desktop

Now click LMB on the selected address and, Don’t let go, Move this element to the Desktop.

A YouTube shortcut will be created. For more convenience, you can rename it and move it to any other place on the desktop.

Now, by double-clicking the left mouse button on adding a shortcut, you will immediately open the previously selected YouTube page in a new tab in your browser. If, for some reason, you do not like the way its icon looks (although it can be easily changed), or that the site will be opened in the same place as everyone else, check out the next part of this article.

Web app shortcut

The official YouTube site, which you are used to opening in a browser, can be converted to some analogue of an independent application if you wish. it will not only have its own shortcut, but also run in a separate window. True, this feature is NOT supported by all web browsers, but only by Google Chrome and Yandex.Browser, and also, probably, products based on a similar engine. Just in the example of this pair, we will show the algorithm of actions that must be performed to create a YouTube shortcut on the Desktop.

Note: Despite the fact that the steps described below can be performed on a computer or laptop with any version of Windows, the desired result can be achieved only on the “top ten”. In previous editions of the operating system, the proposed method may NOT work, or the created shortcut will “behave” in the same way as in the previous case discussed above.

Google chrome

    Open the video hosting page in the browser that you want to see when you launch its shortcut.

Click LMB on the button calling “Settings and controls.” (vertical ellipsis in the upper right corner). We will bring the cursor to the item “Additional tools”, and then select “Create shortcut”.

  • In the pop-up window, if necessary, change the name of the created web application and click on the “Create” button.
  • A beautiful YouTube shortcut will appear on your desktop, with its original icon and the name you specified. It will open in a new tab, but you can make it so that the video hosting site is launched in a separate window, because this is exactly what is required from an independent application.

      On the Google Chrome bookmark bar, right-click (RMB) and select “Show the services button”.

    Now go to the “Applications” menu that appears on the left.

    Right-click on the YouTube shortcuts and select “Open in a separate window” in the context menu.

    The launched YouTube web app will look like this:

    See also: How to save a tab in Google Chrome

    Yandex browser

      As in the description above, go to the YouTube page that you plan to make the “start” for the shortcut.

    Open the web browser settings, clicked LMB on the image of three horizontal stripes in the upper right corner. Go to the “Advanced” items one by one. “Additional tools”. “Create shortcut”.

    Specify the desired name for the created shortcut. Make sure that there is a check mark next to the item “Open in a separate window” and click “Create”.

    YouTube shortcut will be immediately added to your desktop, after which you can use it for quick access to the world’s most popular video hosting.

    Note: Unfortunately, the implementation of the above methods is not always possible, even on Windows 10. For some unknown reason, the developers of Google and Yandex either add or remove this function from their browsers.

    This is where we will end. Now you know about two completely different ways to add a YouTube shortcut to the Desktop for the fastest and most convenient access to it. The first of the options we have considered is universal and can be executed in any browser, and regardless of the version of the operating system. The second, although more practical, has limitations. is NOT supported by all web browsers and versions of Windows, plus it does not always work correctly. Nevertheless, we hope that this material was useful for you and helped to achieve the desired result.

    Website shortcut to desktop: how to create? Two simple instructions

    The Internet has become an integral part of every computer, and browsers are the main tool for interacting with the world wide web. Every active Internet user has his own favorite sites, which he visits several times a day. Register the site address several times daily. this is a procedure that takes a couple of seconds, but very annoying. You can add a page of interest to your bookmarks, but it risks getting lost there among dozens of similar sites. There is a much simpler and more convenient way. bring the site shortcut to the desktop, and we will tell you how to do it.

    Create a shortcut to a site on the desktop using a browser

    Modern browsers have dozens of features that users don’t even suspect. In the browser, you can draw, type, play, read books and watch movies. Naturally, browser developers made sure that users could create a shortcut to their favorite site on the desktop, and make it as simple as possible.

    Google chrome

    The most common browser is Google Chrome, which works great on computers of any power. It is very easy to create a shortcut to a site from Google Chrome:

      We go to any site, quick access to which you want to Get, for example, on okeygeek.Ru;

    Now when you double-click on the created shortcut, the browser will open with the start page in the form of the selected site.

    Opera and Mozilla Firefox

    The process of creating a desktop shortcut in the Opera and Mozilla Firefox browsers is practically the same as in Google Chrome. The only difference. This is the designation of the sign you need to drag to transfer the shortcut to the desktop. If in the Google Chrome browser a potential shortcut is made in the form of a letter of paper with a curled edge, then in Opera and Mozilla it resembles a planet.

    Create a shortcut to a site on the desktop using standard Windows features

    The Windows operating system assumes the ability to create shortcuts on the desktop, not only to access programs that are often used, but also to websites. The process of creating a shortcut to a site on the desktop is very simple:

    • Right-click in any area of ​​the Windows desktop that is free of shortcuts;
    • In the menu that appears, select the “Create” items. “Label”;
  • A shortcut appears on the desktop, by double clicking on which the site specified in its properties will open.
  • It should be noted that the program in which the created shortcut will open will depend on which browser is assigned on the computer as “Default”. If you think that the site shortcut opens in the wrong browser, you should change the browser, Installed “Default”.

    We remind you that the icon of the created shortcut can be simply changed. To do this, right-click on the shortcut and select “Properties”. In the menu that opens, there will be an option to “Change Icon”. It remains only to choose the option you like from the shortcuts offered by the system or set your own.

    How to change the default browser in Windows 10

    Changing the default browser in Windows 10 is quite easy if you know the settings to which you should refer. First of all, make sure that the browser you want to install as the main one is on your computer. Next, you need to follow a simple instruction to change the “Default” browser in Windows 10:

      Click on the “Start” button and in the menu that appears, select the “Parameters” value;

    After that, the shortcut that was created above will start running in the selected browser. In addition, all links in text documents and other programs will open in the default browser.