how to boot from USB drive in samsung laptop

Solving Potential Problems

Alas, the boot process from a USB flash drive on an ASUS laptop is far from always successful. Let’s analyze the most common problems.

BIOS does not see the USB flash drive

Perhaps the most common problem with booting from a USB drive. We already have an article about this problem and its solutions, so first of all we recommend that you be guided by it. However, on some laptop models (for example, ASUS X55A) there are settings in the BIOS that need to be disabled. This is done like this.

  • We go into the BIOS. Go to the “Security” tab, go to the “Secure Boot Control” item and disable it by selecting “Disabled”. To save the settings, press the F10 key and restart the laptop.
  • Boot into BIOS again, but this time select the “Boot” tab. In it we find the “Launch CSM” option and turn it on (the “Enabled” position). Press F10 again and restart the laptop. After these actions, the flash drive should be correctly recognized.

The second reason for the problem is typical for flash drives with recorded Windows 7. this is an incorrect partitioning scheme. For a long time, the MBR format was the main one, but with the release of Windows 8, GPT took the dominant position. To deal with the problem, overwrite your flash drive with the Rufus program, choosing in the “Scheme and type of system interface” option “MBR for computers with BIOS or UEFI”, and set the file system to “FAT32”.

The third reason is problems with the USB port or the flash drive itself. Check the connector first. connect the drive to a different port. If the problem is observed, check the USB flash drive by inserting it into a known working connector on another device.

Booting from a USB flash drive on ASUS laptops

ASUS notebooks have gained popularity for their quality and reliability. Devices from this manufacturer, like many others, support booting from external media such as flash drives. Today we will consider this procedure in detail with you, as well as get acquainted with possible problems and their solutions.

Booting ASUS laptops from a USB stick

In general terms, the algorithm repeats the method identical for all, but there are also several nuances, which we will get acquainted with further.

    Of course, you need the bootable USB stick itself. The methods for creating such a drive are described below.

Read more: Instructions for creating a multi-boot USB and bootable USB flash drive with Windows and Ubuntu

Please note that at this stage, the problems described below in the corresponding section of the article most often occur.!

Read more: BIOS setup on ASUS notebooks

  • This is followed by directly booting from an external USB drive. Provided that you did everything correctly in the previous step, and did not encounter problems, your laptop should boot correctly.
  • In case there are problems, read below.

    Touchpad and keyboard do not work during boot from a flash drive

    This is an uncommon problem in most recent laptops. Its solution is absurdly simple. connect external control devices to free USB connectors.

    As a result, we note that in most cases, the boot process from flash drives on ASUS laptops runs smoothly, and the problems mentioned above are rather an exception to the rule.

    Boot from USB without entering BIOS (Windows 8, 8.1 and Windows 10 with UEFI only)

    If your computer has one of the latest versions of Windows installed, and the motherboard has UEFI software, then you can boot from a USB flash drive without even entering the BIOS settings.

    bios, samsung, laptop, booting, flash

    To do this: go to settings. change computer settings (through the panel on the right in Windows 8 and 8.1), then open “Update and Recovery”. “Recovery” and click the “Restart” button in the “Special boot options”.

    On the Select Action screen that appears, select Use Device. USB device, network connection or DVD “.

    On the next screen, you will see a list of devices from which you can boot, among which there should be your flash drive. If suddenly it is not there. click “View other devices”. After selection, the computer will reboot from the USB drive you specified.

    Configuring boot from external media in H2O BIOS

    To boot from a USB flash drive into the InsydeH20 BIOS, which is found on many laptops, in the main menu, use the “right” key to go to the “Boot” item. Set External Device Boot to Enabled. Below, in the Boot Priority section, use the F5 and F6 keys to set the External Device to the first position. If you need to boot from DVD or CD, select Internal Optic Disc Drive.

    Then go to Exit in the top menu and select “Save and Exit Setup”. The computer will reboot from the correct media.

    Configuring boot from a flash drive in AMI BIOS

    Please note that in order to perform all the described actions, the flash drive must be connected to the computer in advance, before entering the BIOS. To set boot from a USB flash drive to AMI BIOS:

    • From the top menu, press the right key to select Boot.
    • After that, select the item “Hard Disk Drives” and in the menu that appears, press Enter on “1st Drive”
    • In the list, select the name of the flash drive. in the second picture, for example, this is Kingmax USB 2.0 Flash Disk. Press Enter, then Esc.
    • Select “Boot device priority”,
    • Select “First boot device”, press Enter,
    • Again, specify the USB stick.

    If you need to boot from a CD, then we indicate the DVD-ROM drive. Press Esc, in the menu above from the Boot item, move to the Exit item and select “Save changes and exit” or “Exit saving changes”. when asked if you are sure that you want to save the changes made, you will need to select Yes or type “Y” from the keyboard, then press Enter. After that, the computer will reboot and start using the flash drive, disk or other device of your choice for loading.

    How to get into BIOS to select boot options

    In different cases, in order to get into the BIOS setup utility, you need to perform, in fact, the same action: immediately after turning on the computer, when the first black screen appears with information about the installed memory or the logo of the computer or motherboard manufacturer, press the desired a button on the keyboard. the most common options are Delete and F2.

    Press Del key to enter BIOS

    Usually, this information is located at the bottom of the initial screen: “Press Del to enter Setup”, “Press F2 for Settings” and similar. By pressing the right button at the right moment (the sooner, the better. this must be done before starting the operating system), you will be taken to the settings menu. BIOS Setup Utility. The appearance of this menu may differ, let’s look at a few of the most common options.

    Booting from a USB flash drive to BIOS AWARD or Phoenix

    In order to select a device to boot into the Award BIOS, in the main settings menu, select “Advanced BIOS Features”, then with the First Boot Device selected, press Enter.

    A list of devices from which you can boot will appear. HDD-0, HDD-1, etc., CD-ROM, USB-HDD and others. To boot from a USB flash drive, you need to install a USB-HDD or USB-Flash. For booting from a DVD or CD. CD. ROM. After that, go up one level by pressing Esc, and select the “Save Exit Setup” menu item.

    Booting from a USB flash drive to BIOS

    When installing Windows from a USB flash drive, you need to boot the computer from a CD, and in many other cases, you need to configure the BIOS so that the computer boots from the desired media. This article will discuss how to set boot from a USB flash drive to BIOS. Also useful: How to put boot from DVD and CD in BIOS.

    Update 2016: The guide added ways to put boot from USB to UEFI and BIOS on new computers with Windows 8, 8.1 (which will work for Windows 10 as well). In addition, two methods have been added to boot from a USB drive without changing the BIOS settings. Options for changing the order of boot devices for older motherboards are also present in the instructions. And one more important point: if booting from a USB flash drive on a computer with UEFI does not work, try disabling Secure Boot.

    Note: The end also describes what to do if you are unable to enter BIOS or UEFI software on modern PCs and laptops. To learn how to create bootable USB sticks, you can read about Honor here:

    Changing boot order in UEFI BIOS

    On modern motherboards, the BIOS interface, or more precisely, the UEFI software, is usually graphical and, perhaps, more understandable in terms of changing the order of boot devices.

    In most variants, for example, on Gigabyte (not all) or Asus motherboards, you can change the boot order by simply dragging and dropping the disk images with the mouse.

    If this is not possible, look in the BIOS Features section, in the Boot Options item (the last item may be located in a different place, but the boot order is set there).

    Using the Boot Menu to boot from a USB flash drive

    In most cases, installing a boot from a USB flash drive in the BIOS is required for some one-time task: installing Windows, checking the computer for viruses using the LiveCD, resetting the Windows password.

    In all these cases, it is not necessary to change the BIOS or UEFI settings, it is enough to call the Boot Menu (boot menu) when you turn on the computer and once select the USB flash drive as the boot device.

    READ  What memory card is needed for Samsung

    For example, when installing Windows, you press the desired key, select the connected USB drive with the system distribution kit, start the installation. configuration, copying files, etc., and after the first reboot, the computer will boot itself from the hard drive and continue the installation process as usual. mode.

    I wrote in great detail about entering this menu on laptops and computers of various brands in the article How to enter the Boot Menu (there is also a video instruction there).

    How to enable boot from a USB flash drive in BIOS on an Asus laptop

    There are two ways to boot from a USB flash drive on an Asus laptop:

    • through a combination of buttons to go to the BIOS;
    • using the USB key forcing.

    Before booting from USB, the user needs to create a bootable disk. For this it is recommended to use the UltraISO program. The estimated amount of internal memory of a portable drive for a successful OS boot must be at least 4 GB, and the file system must be FAT32.

    If initially the flash drive has NTFS format, then it must be formatted. Right-click on the USB drive icon and select the “Format” line.

    Normal BIOS setup

    After loading the operating system and writing it to a USB flash drive as a boot disk, you need to go to BIOS.

    Instructions for switching to BIOS on an Asus laptop:

    • Turn off your laptop.
    • Press the power button. When the manufacturer icon appears, press and hold the F2 button for 5-7 seconds.
    • Wait for the menu to appear.

    Navigation through the BIOS is carried out using the arrows on the keyboard panel. To accept values, use the Enter key, and to return them back. ESC.

    On an Asus laptop, you can set the BIOS to boot from a USB flash drive as follows:

    • After going to BIOS, go to the Security tab. It is located in the top panel menu.
    • Opposite the line Secure Boot Control, select the value Disabled.
    • Next go to the Boot tab.
    • Turn on Launch CSM. Opposite it should be the value Enabled.
    • Use the Save Exit tab to save your changes. Alternatively, use the F10 key.
    • On the same tab at the very bottom is the Boot Override item. Under it, click on the inscription with the name of the USB-drive.
    • Exit BIOS to start booting the operating system from the USB flash drive.

    If you are using an old BIOS version (BIOS Award), then it is recommended to do the following to start:

    • Turn off your laptop. Press the power button.
    • When the manufacturer’s icon appears, press F2 or Del.
    • Go to the Advanced BIOS Features tab.
    • Opposite the line First Boot Device, select the inserted drive. Make sure there is a different boot item next to Second Boot Device.
    • Press Enter to accept the changes and then ESC to exit. Make sure all the settings you made are saved.

    If you come across the BIOS version H2Insyde20, then the instructions for Asus are as follows:

    • Use the Del or F2 key to enter the BIOS menu.
    • Select the Boot tab.
    • Set External Device Boot to Enabled.
    • Below in the Boot Priority item, put External Device in the first place.
    • Go to Exit and select Save and Exit to accept the changes and restart your computer.

    Note! The Intel CoffeeLake processor line does not support the Launch CSM feature, so the value will always remain off. In this case, you will have to use EZ Boot Mode.

    Setting up the graphical uefi BIOS BIOS utility ez mode

    To successfully boot from a USB flash drive, on an Asus laptop via EZ Mode, you need to do the following:

    • Turn off the device.
    • Press the power button. When the manufacturer’s icon appears, press the ESC button several times until the BIOS menu appears.
    • Make sure that a USB flash drive is displayed under the USB Port item.
    • On the right, almost in the corner, there is an inscription Boot Priority. Click on it.
    • Select the inserted USB flash drive from the entire list.
    • Press F10 to save changes and exit BIOS.

    After restarting your Asus computer, downloading data from USB will start. The process can take from a few seconds to 3-4 minutes.

    Why does not he see the bootable USB flash drive and what to do

    If the system does not see the bootable USB flash drive, then the problem may be as follows:

    • Launch CSM is not enabled;
    • ASUS Secure Boot has not been disabled;
    • the data was written to the drive incorrectly and the system does not read USB as a bootable element;
    • the file system has not been changed, NTFS is not always supported as a bootable flash drive.

    It is recommended to use the Rufus software to correctly record the USB stick. It allows you to select the partition scheme and interface type for different motherboards.

    • Download the application from the official website of the manufacturer and install it.
    • Run the program. Next, you need to configure the parameters of the flash drive. Select in the first line the USB drive to be overwritten.
    • In the next line, select GPT with UEFI support.
    • At the bottom, check the box next to the phrase “Create bootable disk”. The ISO format should be on the right. Click even more to the right on the disk icon and select the downloaded operating system in ISO format.
    • Make sure there is a check mark next to “Standard Windows Installation”.
    • Press start to start burning the image. Wait for the end and remove the USB flash drive.

    The BIOS may not see USB if the drive is being used in a USB 3.0 port. A more proven option is to use an older USB 2.0 port. The rest of the problems should not arise during the download, especially if you strictly followed our instructions.

    Booting from a USB flash drive to BIOS: step by step instructions

    So, to put a boot from a USB flash drive in the BIOS on a laptop, you need:

    • Initially, we connect the USB drive to the device. That is, we insert it into the USB connector.
    • We reboot the laptop. When enabled, press the Delete or F2 key. Depends on manufacturer, BIOS version and model. Sometimes you even need to press Esc, F1, Tab.
    • Disable Secure Boot Protocol. This is special protection. It is also available in the UEFI BIOS, the most common version preferred by many modern laptop manufacturers. To disable it, select the Security section. Here we are looking for the Secure Boot line, in which we set the value Disabled (disabled). If this is not done, then the corresponding protocol will not allow you to boot your laptop from the USB flash drive. Priority will remain with the Windows installation disc.
    • Go to the Boot tab. Select the item Hard Drive BBS Priorities. We move our flash card to the first place in the list of boot devices (the hard disk automatically moves to the second). We also disable the “fast boot” option: in the Fast Boot line, select the Disabled value. If you see the Launch CSM item, then you need to translate it to Enable. In addition, quite often on a Samsung laptop, there is an add-on in this window. OS Mode Selection. It must be set to “CMS OS” or “UEFI and Legacy OS”.
    • Now press F10 on the keyboard. Thus, we save all the changes made.
    • If everything is done correctly, the laptop will start loading from the USB flash drive.

    Do not forget that in BIOS we can navigate through sections, tabs and lines only by using the buttons on the keyboard. The mouse won’t help you.

    However, the BIOS versions are different for all manufacturers and laptop models. Therefore, the above procedure is not suitable for all devices. For example, if you go into BIOS and see a similar interface, then you have Award BIOS.

    Then it’s best to start a bootable USB flash drive like this:

    • Go to the “Integrated Peripherals” section.
    • Approximately in the middle of the screen, we find the item “USB Controller” with the arrows on the keyboard.
    • We press Enter. In the window, select the value “Enable”.
    • Please note that the line “USB Controller 2.0” also has “Enable”.
    • Press Esc. We leave this section. Then we go to Advanced BIOS Features. The name translates as additional or advanced settings. Here we need the item “Hard Disk Boot Priority”.
    • We go in and see what is in the 1st place. There must be a flash drive, not a hard drive. Therefore, we select the USB-card and use the “” button to lift it up.
    • Press Esc. Select the line “First Boot Device” and set the value to “USB-HDD” (or USB-FDD, if the first option fails to boot from a USB flash drive into BIOS on a laptop).
    • Click Esc again. Select “Save Exit Setup”, then press the Y key.

    There are also other versions of the BIOS. These are both Phoenix-Award BIOS and AMI BIOS. True, they are all found only on old laptops with not the most recent motherboards. How to configure booting from a USB flash drive for such devices? All the same. Only the names of the sections and BIOS menu items differ. The algorithm of actions and settings is as similar as possible.

    For reference! As we have already noted, in order to install a boot from a USB flash drive in the BIOS, you need to disable the Secure Boot protocol. That being said, on many lenovo laptops, this is not enough. You may also need to enable compatibility mode. It is called differently. Therefore, look for CSM / CSM Boot, UEFI and Legacy OS, Legacy BIOS, Legacy Support, etc.

    READ  Transfer from Samsung to Samsung application

    How else can you boot from a USB flash drive on a laptop?

    Using a computer BIOS is not the only option. For example, it is possible to boot from a USB flash drive on a laptop asus, toshiba, Samsung, etc. and through a special boot menu. It is called the Boot Menu (by the way, it is also part of the BIOS). You can enter it during the initial download phase. You just need to press Esc, F8, F11 or F12 quite often. Which key exactly depends on the motherboard developer and the BIOS version used in it.

    Once in the Boot Menu, you need to select and install the boot from the USB flash drive using the arrows on the keyboard. Then all you have to do is press Enter. Agree, it’s quite convenient and simple. However, it is not always possible to enter the boot menu. The fact is that on some laptop models the Boot Menu option is deactivated in the BIOS. Therefore, additional steps are required to enable it.

    There is one more thing worth paying attention to. The Boot Menu does not have any unified design. It can also be called differently: “MultiBoot Menu”, “BBS Popup”, “Boot Agent”, etc. However, in any boot menu there is a list of devices from which the boot can be performed.

    How to boot a laptop from a USB flash drive via UEFI?

    Many modern computing devices (especially those with the latest versions of Windows) come with a new bootstrap interface. It is called UEFI. Working with this “variant” of BIOS is a little easier. Plus, you can use the mouse here. However, despite the fact that the new interface is more understandable, not all users know how to work with it. Therefore, we will briefly describe the entire procedure.

    For example, to boot from a USB flash drive on an HP laptop to UEFI, you need to:

    • When booting the device, press the ESC key several times. Then F10 to get into BIOS Setup.
    • Now, at the very bottom of the window, find the Boot Priority section.
    • Just drag the USB flash drive icon to the first place.
    • Another option is to click on “Exit / Advanced mode”, then confirm the transition to the advanced mode by selecting the Advanced Mode item. Next, configure.

    However, there are also quite a few UEFI versions. There are also Russified versions. As a rule, it is even easier to set the boot from a USB flash drive here:

    • First you need to go to the “Download” section. Sometimes it is made in the form of a subsection. Then you should look for it in additional settings.
    • Just select the “Disc loading order”.
    • Prioritize the download to put the USB flash drive first.
    • Press F10. Save changes, restart laptop.

    We will also talk about how to boot from a flash drive on devices with Gigabyte motherboards (they are preferred by many popular manufacturers. Acer, Lenovo, Samsung, etc.), on which UEFI BIOS is quite common.

    • We go into the BIOS. You already know how to do this. The easiest way is to press “Delete”, “F2” or “Esc” at the initial stage of loading.
    • Next, “visit” the “BIOS Features” tab.
    • At the very bottom of the window, click on “Hard Drive BBS Priorities”.
    • In the line “Boot Option 1” you need to put our USB flash drive instead of the hard drive. Therefore, in “Boot Option 2” a hard disk should appear. HDD.
    • Save and exit.

    How to boot a laptop from a USB flash drive

    Quite often, laptop owners or users have to boot into the BIOS from a USB flash drive. Especially if the device does not have a CD / DVD drive, but you need to install a new operating system (OS) or install fresh drivers and antivirus software. Therefore, in this article, we will tell you in detail how to set boot from a USB flash drive to BIOS on laptops of various manufacturers (HP, MSI, sony, dell, acer, etc.).

    Possible problems

    At first glance, booting a laptop from a USB stick is not difficult. However, there can always be some problems. Therefore, we decided to describe the most frequent ones. In addition, we will tell you how to eliminate them.

    • Windows 7 laptop can’t boot from USB 3.0 stick? Indeed, this OS version does not support this standard without special drivers. Therefore, the easiest way is to switch the USB stick to a different slot. After all, many laptops have both a 3.0 and 2.0 flash drive slot. It’s pretty easy to tell them apart. USB 3.0 has blue color (2.0 has black) and two letters SS next to the port.
    • Do you press a variety of keys on your keyboard when you boot the OS, but still can’t get into the BIOS or Boot Menu? Then, when you start the laptop, pay attention to the inscriptions at the bottom of the screen. These are the prompts to the user. For example, the following may be written there. “Press F11 for Boot Menu”, “Press Del to enter Setup” or something similar.
    • Did you do everything correctly, but the bootable USB drive is still not recognized? There may be several reasons for this problem. However, more often than not, the whole point is whether the installation distribution was recorded incorrectly or the USB drive itself is faulty. It is worth checking the flash drive on another device. The software itself is better to record on a medium through DAEMON Tools or Alcohol 120%.
    • If you cannot boot a laptop from a USB drive using the boot menu, then you need to go into the BIOS. Here you need to make sure that the boot device priority is set correctly. To do this, we turn to the Boot tab. The USB stick should come first. If it is not, then highlight it and press F6. Thus, it will move to the first position.
    • Quite often on laptops with Windows 8 and 10, it is not possible to boot into the BIOS from a flash drive. Disabling the quick start function helps. To do this, go to the Control Panel. We select the section “Power supply”, then on the left we click on the item “Actions of the power buttons”. Next, uncheck the box that refers to “Enable Fast Startup”. It remains only to save all the changes.

    Please note that very old laptops may not be able to boot from USB sticks at all. Then you need to either upgrade the device by installing a new motherboard and software, or think about purchasing a new computer.

    Stage 2: BIOS launch

    If you did everything correctly, then you will see the system boot menu, in which you should click on the “Diagnostics” item.

    Then click on “Additional parameters”.

    And then. on “UEFI Firmware Options”

    Go to the final launch phase. click “Restart”.

    The screen will turn off and after a short (or maybe a long) time you will see the BIOS screen:

    Stage 1: how to enter the boot menu

    There are two radically different ways.

    The first is with a specially performed laptop reboot. This is the recommended way.
    The second is useful as a last resort if you cannot log in to configure the settings of the first method.

    Extreme method

    I have applied this method once, when my laptop crashed severely after updating one of the applications. The laptop hung at the start and did not want to display an authorization window. Hence, I could not login to the system to do a reboot with special parameters.

    I needed to do this to restore the system, but if you have the same problem, help you enter the BIOS.

    I warn you! It is possible to use this method only as a last resort, when there are no other ways.

    This is done like this (I performed these steps on a Samsung product):

    • You connect your laptop to the network
    • Start the system.
    • Disconnect (remove) the battery. the laptop continues to work.
    • Disconnect your laptop from the network.
    • Wait a little while.
    • Connect the battery.
    • Connect to the network.
    • Launch by pressing the power button.
    • After these steps you will find yourself in the system boot menu.

    How to enter BIOS in a Samsung laptop and how to update it

    The new generation of UEFI systems that have replaced BIOS has made it difficult to penetrate the holy of holies on laptops. Gone are the days in which every user could easily get there by restarting the computer and pressing the Delete button. Or, if this did not help, press some other keys from the functional group. F6. F8 or others.

    This article will discuss how to enter the BIOS on modern PCs or laptops with modern operating systems such as Windows 8 or Windows 10. It looks like you are already desperate, asking yourself the question. is this even possible on your laptop? Maybe you don‘t have any BIOS either?

    Do not be afraid! Now you can easily and simply follow the necessary steps. We will do this using the example of a Samsung NP350V5C laptop with Windows 8 installed on it.

    We will also look at how you can update the BIOS, and at the end of the article there is a video on how to configure it before installing Windows 7 or 8.

    Let’s divide the BIOS startup process into 2 stages. So let’s go

    Correct reboot option

    Just slide your mouse vertically along the right edge of the screen until a pop-up menu appears. You can also call it using the keyboard by pressing Win C.

    Next, click on “Settings”, then “Change computer settings.” Then press “Update and Restore”.

    Far away, the manufacturer dragged this option!

    Now we press “Restore” and here it is. the coveted item “Special boot options”. we press on “Restart now”.

    READ  How to make icons smaller on Samsung A 50

    Your Samsung (or whatever you have) will dutifully reboot and appear in the boot menu.

    BIOS update

    It is strongly recommended to update the BIOS only from the official websites of the manufacturers.

    In my case, in the browser I need to go to the Samsung website and enter the full model name (written on the bottom of the laptop case): NP350V5C-S1JRU

    After pressing the Enter button, a list appears in which we select an item from the category “Firmware”

    Next, scroll down the screen and find “Update Software”, click on it, which leads to the download of the BIOSUpdate.exe file

    Since I downloaded it from the official Samsung website, I can safely launch it

    and update the BIOS of the laptop:

    In my case, the latest update has already been installed. If you have a new version available, you just have to press the last button to update the BIOS.

    How to configure BIOS to boot from disk or flash drive

    How to enter BIOS or UEFI, change the priority of boot devices, operating modes of the SATA controller (AHCI and IDE), boot using the Boot Menu to install Windows.

    In the last article, we talked about how to make a bootable disk or USB flash drive. And now I will tell you how to configure the BIOS of a computer to install Windows from a disk or flash drive.

    3.3. Cancel settings

    If you have changed something by accident or are not sure if the settings you made are correct, go to the Exit tab and select Exit and Discard Changes, or press Esc until you see the message to exit without change settings and confirm the action (“OK” or “Yes”).

    3.4. Restore settings

    To restore all settings to the optimal default values, go to the Exit tab and select Load Setup Default. After that, you can immediately change other settings or just exit the BIOS with saving the parameters (“Exit and Save Changes” or “F10”).

    What is BIOS and UEFI

    Each motherboard has a special program to boot the computer and configure the parameters of various devices. This program is stitched (programmed) into a special microcircuit on the motherboard and is therefore called firmware.

    Previously, all motherboards had a firmware called BIOS, which had a simple graphical interface with white letters on a blue background and was limited in functionality. For example, in the BIOS it was impossible to use a mouse, choose a language, and there were no graphic elements (pictures) due to the limited size of the BIOS memory chip. Also, motherboards with BIOS did not support drives larger than 2TB due to limitations of the old disk partitioning system (MBR).

    Now many motherboards have a new type of firmware called UEFI, which features an improved graphical interface with a beautiful background, hand-drawn buttons, the ability to select a language (including Russian) and some improvements. For example, support for a new type of disk partitions (GPT), which allows the use of hard drives larger than 2 TB.

    You can find out what type of firmware your motherboard has in the manual for it, on the website of the manufacturer of the motherboard or laptop, and also visually when entering the Setup program. The Setup program is also stitched into the motherboard and is used to change BIOS or UEFI settings.

    How to enter BIOS Setup

    To enter the Setup program, immediately after turning on the computer, hold down the “Delete” button on the keyboard. On some motherboards and laptops, this is done using the F2, F10, or Esc keys. Which button to press can be read in the messages that appear immediately after turning on the computer.

    If you do not have time to read, then press the “Pause” button on the keyboard to pause the download. You can continue downloading by pressing any key. If you press the key intended to enter Setup, you will immediately be taken to the motherboard setup program.

    Boot problems

    Friends, due to the fact that many had problems with booting when installing Windows and some wrote about it in the comments, I decided to make a separate section where I collected the ways I know how to solve these problems.

    • If the computer stops booting at the very beginning and asks to press F1, after which it enters the BIOS, then you most likely either have a low battery on the motherboard (time may get lost), problems with the processor cooler (out of order, it was not connected there) or a hard drive (errors in Smart).
    • If the message “Reboot and Select proper Boot device or Insert Boot Media in selected Boot device and press a key” appears when you turn on the PC, this means that the boot area on the disk or flash drive was not found or is damaged. Try to boot from the installation disk or flash drive using the Boot Menu (section 6 of the article), if it does not help, make the bootable media again using the Windows USB / DVD Download Tool.
    • If, after restarting the computer, the installation of Windows starts from the beginning, then remove the boot disk or USB flash drive and restart the computer, the installation should continue from the hard disk.
    • Disconnect all unnecessary USB devices from the computer (USB flash drive, 3G modem, smartphone, printer). You only need to leave the mouse, keyboard, DVD-disk or USB flash drive from which you are installing Windows.
    • If you have several hard disks, then disconnect all disks from the motherboard, except for the one on which Windows will be installed.
    • Reset BIOS settings to defaults (described in this article).
    • If the installer does not see the disk or at the end the error 0x0000007B appears, change the SATA controller mode in the BIOS from AHCI to IDE or vice versa.
    • If at each boot the computer or laptop enters the BIOS itself or opens the boot menu, then set the Boot Pop Menu option in the BIOS to Disable (if any).
    • Disable Fast Boot in the Advanced section of the BIOS, and in the Boot section, set the Launch CSM option to Enable (if any).
    • Under Boot in BIOS, change Boot Mode from EFI (UEFI) to Legacy (if available).
    • Set the BIOS to the Secure Boot option to Disable (if any).
    • Select the version of Windows you are installing in BIOS (if any).
    • If you have a laptop, one version of Windows is installed, but the other is not, and advice on setting up the BIOS did not help you, then contact the support or the manufacturer’s forum. Updating the BIOS can also help, after which additional options may appear in it (clauses 8-12).
    • If possible, install Windows from a DVD, as there are many different problems with flash drives.
    • Make a bootable disk or USB flash drive from the original image.
    • Insert the USB stick into the USB 2.0 port on the back of your computer (motherboard) or the USB 2.0 port on your laptop. Booting from USB 3.0 does not always work.
    • Try using the Boot Menu, as described in section 6 of this article. This method is easier, more reliable than setting the boot priority in the BIOS and you can determine whether the computer sees your USB flash drive.
    • An underscore on a black screen indicates that the computer freezes when accessing a USB flash drive or hard drive. If the download goes on without a flash drive, then the point is definitely in it.
    • If the computer does not see the USB flash drive or does not want to boot from it, use a DVD or another USB flash drive for installation.
    • If this is not possible, then change the type of flash drive from “removable media” to “hard disk” using the “BootIt Next Generation” utility, format it with the “HP USB Disk Storage Format Tool” utility and make it bootable again using “Windows USB / DVD Download Tool “. You can download all these utilities below in the “Links” section.
    • If the problem occurs after selecting the Windows installation partition, then use the BIOS setup tips (p. 7-12). Remove old partitions from the disk during installation or do it using the Acronis Disk Director boot disk.
    • If the installer reports that it cannot install Windows to the disk, then try converting MBR to GPT or vice versa.