Asus VivoBook. getting ready for Windows 10

Quick review

  • Screen: 17.3 19201080 IPC
  • Processor: 2 core AMD Ryzen 3 3200U.6 GHz
  • Graphics Card: 2GB Radeon Rx 540X GDDR5
  • RAM: 8GB DDR4-2666
  • HDD: 1000GB Toshiba MQ04ABF100
  • Board: X712DK

The laptop was sold without a pre-installed OS and needed to be prepared for use.

Creating a bootable Windows 10 Pro flash drive

It will take some time to download and write, so the new laptop can be put aside for now. To create a bootable flash drive I used my old laptop with Windows, it already had installed a torrent client to download the Windows 10 image and Rufus to burn it.

Download Windows 10 Pro build 18363

You can download the image of Windows from the official site, I downloaded and installed this distribution. Загрузите microsoft-Windows-10_0_18363_720-version-1909-march-2020-update-originalnye-obrazy-msdn-ru.torrent file, open it and download the image. By default it will be in the user’s Downloads folder in the Microsoft Windows 10 folder.0.18363.720 Version 1909 (March 2020 Update). Original MSDN images [Ru], file

Write Windows 10 Pro 18363 image on a flash drive

You need an 8 GB flash drive to write the distributive

Check the BIOS settings

Without a bootable flash or preinstalled OS, enter the BIOS automatically, or press Esc key about 3 times per second when powering on the notebook, to enter the boot menu.

Note: The items in the images marked with an X initially in the menu are not present until Windows is installed

By default, all factory settings are done correctly and there is no need to change anything. It is important that Fast Boot should be set to Enabled, and Secure Boot Control should be set to Disabled. It does not matter if you did not see the Launch CSM checkbox on the boot tab, in my case it was not there either.

Check and, if necessary, change and save BIOS settings. Turn Off Your Laptop.


Insert the bootable flash drive into the USB port, turn on your laptop and enter the startup menu by pressing the Esc key during startup at a rate of about 3 times per second.

Installing Windows to the SSD is standard, just follow the installation wizard.

Activating Windows

To activate Windows 10 Pro and install the license key, use Widows activators. Download it via torrent. client.

See also  How to connect Sony Soundbar to tv. Configure Soundbar With Subwoofer

Download and run Windows 2018. AAct 3.8.3 Portable, activate your Windows 10

After successful activation, remove the downloaded activator files from your computer. Turn on Windows Protector or don’t do it, it will turn on automatically after a while.

Hard drive activation

Your 1TB hard drive for storing data is not activated and formatted at this point.

To activate your hard drive, start the console by typing mmc in the Windows taskbar search menu. From the console menu, click File, then Add or Remove Snap-in, and click Disk Management

Run the utility, activate and format your hard drive

Installing MS Office and programs

Users usually install MS Office, browsers and other commonly used programs to make their work easier

As a result of all these actions we get a configured laptop with activated Windows 10 Pro.


Among operating systems for desktop PCs and laptops, users still prefer Windows for a reason, the biggest drawback of which. price. But as long as there are ways to get Windows semi-legally and runet full of links where you can download it, Windows will continue to enjoy popularity. In general there is no difference between licensed and pirated copies for private noncommercial use.

I’ve been using my Asus VivoBook for nearly a week for my work and entertainment. Happy with the purchase so far. The notebook is fast and handy.

asus, vivobook, boot, flash

How to install Windows 10 or Windows 7 on your Asus vivobook

Despite all the “sights” Asus vivobook, and they are not few owners have difficulties with installing Windows 10 / Windows 7, especially if they try to install from a flash drive.

It’s easier to use a DVD drive, but as it’s not present in Asus vivobook 17, Asus vivobook max, Asus vivobook flip, Asus vivobook 15, x540sa, d540n, x540ya, x712fa, a512f, x540na, x540ma dm298, 15 a512d, m712d, etc. you have to buy a usb drive.

Although it’s not expensive, who wants to bother with it now, if it’s easier to use a flash drive and almost everyone has it at their fingertips nowadays?

Also a problem for those who install Windows 7, as the drivers are usually provided only for the tenth version.

ASUS Laptop VivoBook 2020 2021 How to Enter Boot Menu & Bios / Boot Win10 Installation USB Stick

Although here also not all is well. I recently bought a vivobook with 10, and the wifi worked extremely poorly.

Wanted to download from the official resource, but alas, they were not there, not even found my model, but back to the installation.

Configure graphical uefi BIOS utility ez mode

To successfully boot your Asus laptop through EZ Mode from a USB flash drive, do the following:

  • Turn off your system.
  • Press power button. While the manufacturer’s icon appears press the ESC button repeatedly until the BIOS menu appears.
  • Make sure that you see the USB flash drive under USB Port.
  • On the right, almost in the corner is the inscription Boot Priority. Click on it.
  • Select the USB flash drive that you have inserted from the list.
  • Press F10 to save changes and exit BIOS.

After restarting your Asus computer will start loading data from USB. This process may take anywhere from a few seconds to 3 to 4 minutes.

See also  Connect a smartphone to a TV via HDMI cable

We insert the stick into the USB port (it is black in the picture). Make sure you inserted flash drive to the right port.

Reboot/shut down your computer. Press Delete or F2 (on some recent F10 models) several times to power on, as soon as the computer starts booting. You will see the BIOS area.

Choose the Boot tab. In the new window select Boot Booster and press Enter. Then choose Disabled.

Next, at the same Boot tab, click on Fast Boot, and select Disabled.

asus, vivobook, boot, flash

Save the changes by clicking on the last tab Save changes and exit. This can also be done by simply pressing the F10 button. Your computer will automatically reboot. After restarting it, enter BIOS again, and select the tab called Boot. But this time press Launch CSM and hit Enter. Select Enable.

Next find Boot Option Priorities, go to the first position of this list and press Enter. A window will appear in which you need to choose the name of your flash drive. Select it and again press Enter.

Now save and wait for the reboot to finish. The notebook will boot from your flash drive.

If you find this method too complicated and confusing, you can try to perform the operation using the boot menu.

How to set the laptop Asus in the BIOS boot from a flash drive? Some tips for installing Windows 7 from a USB 3 flash drive.0

Hello all! Yesterday I got my hands on a new Asus X501A laptop. I had to install Windows and everything you need, turnkey :). I turned it around and found out it doesn’t have a CD/DVD drive. It means to create a bootable USB key and install Windows 7 from it. There are drivers for it on the disk included in the package, I also need to rewrite it to a flash drive. In general, strange, laptop without a drive, and the drivers on the disk. It is necessary already on the flash drive drivers in the complete set, or an external drive :).

But never mind. I created a bootable flash drive. I created it using a special Windows 7 USB/DVD Download Tool (I wrote about it here). But ahead of you, for some reason I can’t install Windows 7 using this USB flash drive. The cursor just blinked white and the installation didn’t continue. Wrote a bootable flash drive using UltraISO and it works. Why is it so, did not figure it out :).

That’s it, the USB flash drive is ready. Now, in the BIOS to boot from this flash drive. I will now tell you how to do it.

How to boot from USB flash drive in the BIOS on an Asus notebook? Some tips for installing Windows 7 from a USB flash drive 3.0

Hello all! Yesterday I got my hands on a new Asus X501A laptop. I had to install Windows and everything I needed, turnkey :). I spun it around and found out that it had no CD/DVD drive. And that means creating a bootable flash drive and installing Windows 7 from that. Even drivers for it on a disk included in the kit, you must also rewrite to a flash drive. Strangely enough, the laptop without a drive, and the drivers on the disk. Need to put drivers on a flash drive in the kit, or an external drive :).

See also  Why the tv does not play the USB flash drive. Does not support this video format

Never mind. I created a bootable USB flash drive. First, with the Windows 7 USB/DVD Download Tool (I wrote about it here). I want to say ahead of time, for some reason the installation of Windows 7 from this flash drive did not work. Just a white cursor blinked and the installation did not continue. Backed up my UltraISO bootable flash drive and it worked. Why this was the case, I did not try to figure out :).

Alright, flash drive is ready. Now in the BIOS to set the boot from this flash drive. Here is how to do it.

How to boot from USB stick in AMI BIOS

This version of the BIOS has this interest:

How to boot from a USB key in the AMI BIOS:

  • Open “Boot” menu.
  • Select “Hard Disk Drives”.
  • In the first line (1st Drive) you must put your flash drive. You should see its name. On line 2 (2nd Drive) put your hard drive. Exit to previous menu.
  • Select “Boot Device Priority” option.
  • Select USB flash drive as 1st Device Priority. Set the priority using the “” and “-” keys.
  • Exit BIOS. To do this press Esc and confirm the changes.

USB booting on older computers

Older laptops do not support booting from external drives. The only solution is to use third party utilities together with USB. Extreme case. write to CD.

Popular utilities for booting old laptops:

  • Download the utility from the vendor’s website. Install the application.
  • Insert flash drive.
  • Run the utility as an administrator.
  • Select Add New Entry on the left side of the menu.
  • On the right side, click on the line BIOS Extender.
  • Choose Install PloP. A notification will pop up at the bottom left that the installation was successful.
  • Reboot your system.
  • While the system boots, a line with the software selection menu will appear. Click on the BIOS Extender arrows and then press Enter.
  • Go to the USB tab.
  • Follow the instructions to boot the system from the external media.

If you want to install PLoP on a CD, in the BIOS Extender section select another medium next to “Drive.

  • Download the application from the developer’s website.
  • Insert the CD or flash drive.
  • Unpack the archive. You only need the plbt file.iso.
  • Click on the file with the mouse, and then select “Burn Disk Image”.
  • Select the writing destination, then confirm with the “Write” button.
  • Restart your notebook. Enter your BIOS.
  • Use Features Options\ Advanced BIOS Features to select the CDROM as the First Boot Device.
  • Save and restart your computer.
  • While booting, select Plop Boot Manager. Then click on USB and follow the instructions.

Both tools are made in the same software environment, so their interface is very similar. Use the arrow keys to move and the Enter key to confirm.