Table of Contents

Make sure Bluetooth is turned on

To connect to an Apple Pencil tablet, you need to turn on Bluetooth on it.

  • Open the Settings app and select Bluetooth. Turn on the switch next to Bluetooth.
  • Open Control Center and tap the Bluetooth icon so it turns blue.

Charge your Apple Pencil

If Apple Pencil won’t connect, it could be because the stylus is running low. Recharge it and try again.

  • 1st generation ApplePencil: Remove the cap from the stylus and insert it into the Lightning connector on iPad. You can also use a charging adapter.
  • 2nd generation ApplePencil: Place the stylus on the magnetic connector on the right side of the iPad.

Check the charge level of your Apple Pencil using the dedicated charger widget for all devices.

Contact a specialist

If nothing has helped, then it is better to contact a specialist. Perhaps it’s the stylus itself.

We hope that one of the above methods helped you.

Which iPad models support Apple Pencil

There are two Apple Pencil models and many iPad models. Unfortunately, not all tablets support both stylus. First, make sure your iPad supports your Apple Pencil.

  • iPad (6th, 7th & 8th generation)
  • iPad Air (3rd generation)
  • iPad mini: (5th generation)
  • iPad Pro: 12.9-inch (1st & 2nd generation), 10.5-inch, 9.7-inch
  • iPad Air (4th generation)
  • iPad Pro 9-inch (3rd generation or later)
  • iPad Pro 11-inch (1st generation or later)

Connecting Apple Pencil to iPad

Two different Apple Pencil models connect to iPad in different ways:

  • 1st generation ApplePencil: Remove the cap from the stylus and connect it to the Lightning connector on iPad.
  • 2nd generation ApplePencil: Place the stylus on the magnetic connector on the right side of the iPad (upright)

Immediately after that, the connection interface will appear on the iPad screen.

See similar

Connecting Apple Pencil to iPad

Two different Apple Pencil models connect to iPad in different ways:

  • 1st generation ApplePencil: Remove the cap from the stylus and connect it to the Lightning connector on iPad.
  • 2nd generation ApplePencil: Place the stylus on the magnetic connector on the right side of the iPad (upright)

Immediately after that, the connection interface will appear on the iPad screen.

Charge your Apple Pencil

If Apple Pencil won’t connect, it could be because the stylus is running low. Recharge it and try again.

  • 1st generation ApplePencil: Remove the cap from the stylus and insert it into the Lightning connector on iPad. You can also use a charging adapter.
  • 2nd generation ApplePencil: Place the stylus on the magnetic connector on the right side of the iPad.

Check the charge level of your Apple Pencil using the dedicated charger widget for all devices.

Restart iPad

If all else fails, try restarting your iPad and reconnecting the stylus.

  • iPad with Home button: Hold the top button, then pull the slider on the screen.
  • iPad without Home button: Simultaneously hold down the top button and one of the volume buttons. Then pull the slider on the screen.

Wait at least 30 seconds and then turn on iPad.

Forget Apple Pencil in Settings

Your Apple Pencil should appear in the list of available Bluetooth devices in Settings. Sometimes the problem goes away if you forget the accessory and plug it back in.

1) Open the Settings app and select Bluetooth.

2) Click the Info (i) icon next to Apple Pencil in the list.

3) Click Forget This Device.

Now try reconnecting Apple Pencil.

Apple Pencil won’t connect to iPad? What to do

If you bought yourself an Apple Pencil or a new iPad, then you need to connect them to each other. But what to do if for some reason it doesn’t work?

Below we will discuss several ways to solve this problem.

Which iPad models support Apple Pencil

There are two Apple Pencil models and many iPad models. Unfortunately, not all tablets support both stylus. First, make sure your iPad supports your Apple Pencil.

  • iPad (6th, 7th & 8th generation)
  • iPad Air (3rd generation)
  • iPad mini: (5th generation)
  • iPad Pro: 12.9-inch (1st & 2nd generation), 10.5-inch, 9.7-inch
  • iPad Air (4th generation)
  • iPad Pro 9-inch (3rd generation or later)
  • iPad Pro 11-inch (1st generation or later)

Make sure Bluetooth is turned on

To connect to your Apple Pencil tablet, you need to turn on Bluetooth on it.

  • Open the Settings app and select Bluetooth. Turn on the switch next to Bluetooth.
  • Open Control Center and tap the Bluetooth icon so it turns blue.

Apple pencil (2nd generation)

If you have an Apple Pencil (2nd generation), you can use it with these iPad models:

  • iPad Pro 12.9-inch (3rd generation)
  • for iPad Pro 11-inch

Pair of Apple Pencil (1st generation) from your iPad

If you have an Apple Pencil (1st generation), remove the cap and plug it into the Lightning connector on your iPad.

When you see the steam button, click on it.

After pairing the Apple Pencil, it will stay paired until you restart your iPad, turn on Airplane Mode, or pair with another iPad. Just a couple of times the Apple Pencil when you’re ready to use it.

Pair of Pencil Apple (2nd generation) from your iPad

If you have an Apple Pencil (2nd generation), attach the Apple Pencil to the magnetic connector on the side of your iPad Pro, like this:

Apple pencil (1st generation)

If you have an Apple Pencil (1st generation), you can use it with these iPad models:

  • iPad Air (3rd generation)
  • iPad mini (5th generation)
  • iPad Pro 12.9-inch (1st or 2nd generation)
  • iPad Pro 10.5-inch
  • for iPad Pro 9.7-inch
  • for iPad (6th generation)

Apple pencil won’t connect to iPad

Learn How to Pair, Use and Charge Your Apple Pencil.

Use Apple Pencil

  • Open Sheet Music.
  • Click. to start a new note.
  • To draw, click If you can’t see. update your notes. Sketch, tap. then tap add thumbnail.
  • Start your drawing or sketch. You can choose from several drawing tools and colors, and switch to the eraser if you make a mistake. When you are drawing or sketching, you can tilt the Apple pencil in the shade line and press firmly to darken the mowing line.

If you get close to the edge of the screen with Apple Pencil, iOS won’t activate Control Center, Action Center, or multitasking. You can draw anywhere on the screen without interruption.

On Apple Pencil (2nd generation), you can double-tap the bottom of the apple with the pencil to quickly switch to the last tool you used. To change preferences, double-click and select Apple Pencil Settings, then choose between:

  • Switch between the current tool and the eraser
  • Switch between current tool and last used
  • Show color palette
  • From
READ  iPad air 2 review

Double tap only works in supported apps like notes.

Pencil company works with iPad?

Find out what Apple Pencil works with on iPad.

What are the ways to charge the Apple Pencil

apple, pencil, connect, ipad

2nd generation Apple Pencil

apple, pencil, connect, ipad

The 2nd generation Apple Pencil can be connected to iPad Pro by simply attaching it to the magnetic pad on the side of the tablet.

1st generation Apple Pencil

To charge this model of Apple stylus, you need to remove the magnetic tip from the top of the stylus and connect it to the iPad. You can also do this by using the power adapter and Lightning cable along with the included Apple Pencil adapter.

2nd generation Apple Pencil

To charge the 2nd generation Apple Pencil, simply magnet it onto the mount on the side of iPad Pro. Thus, it will be possible not only to connect the stylus to the tablet, but also to charge it. Apple Pencil 2nd generation will not charge separately from the tablet.

You can use the standard Batteries widget to check the charge level of your Apple Pencil.

Apple pencil won’t connect to iPad

Remove the magnetic cap on the top of the stylus.

How To FIX Apple Pencil Not Working!

Connect stylus with iPad using Lightning.

Confirm the connection using the “Create a pair” button.

Pairing the iPad and the 1st generation Apple Pencil creates before rebooting the tablet. After that, you need to reconnect it using exactly the same method.

How to use Apple Pencil in Notes and other software

Most often, there is no separate activation of this feature to start using Apple Pencil in any application. It is enough to touch the screen with them and start writing, drawing, creating sketches, diagrams. But in universal programs, the stylus must be activated. for example, in “Notes”.

apple, pencil, connect, ipad

Create a new or open an existing entry.

Click the button with the image of the Apple Pencil tip in the lower right corner of the screen.

To make it easier to use Apple Pencil in Notes, you can add custom markup to notes. To do this, go to the “Settings” “Notes” menu of the “line and cage”, and then select the desired option. It is possible to use both a simple set of horizontal lines and a cage.

Checking the battery charge

The first thing to do if your Apple Pencil isn’t responding to taps is to check the remaining battery power. If the pen is not used very often, the battery could simply be discharged.

apple, pencil, connect, ipad

You can check the battery level of the Apple Pencil in a special widget located on the main iPad screen.

How to charge your Apple Pencil with iPad Pro

If your Apple Pencil needs to be charged, all you have to do is reinsert it into iPad Pro.

  • Remove the cap from the Apple Pencil.
  • Insert its Lightning connector into the port on your iPad Pro.

You can also use the adapter included with the Apple Pencil to plug into any standard Lightning cable.

  • Remove the cap from the Apple Pencil.
  • Insert its Lightning connector into the Lightning adapter.
  • Insert the Lightning adapter into the Lightning cable.

15 seconds of charging will allow you to work for 30 minutes, but it will be more advisable to charge the device when no one is using it.

How to use Apple Pencil

Apple Pencil looks like a real pencil, but there are differences.

  • Use the tip of Apple Pencil to press down on icons, buttons, and other interface elements on your iPad Pro. (Note: Unlike a finger, the stylus does not have many motions and touches.)
  • Touch the tip of your Apple Pencil to the iPad Pro screen and start writing a word or line.
  • For darker and wider lines, press harder on the stylus.
  • To create shadows, change the angle of the stylus relative to the iPad Pro screen.

Since Apple Pencil does not support multi-touch, you can use your fingers to navigate as usual. Sometimes you can use both the stylus and your fingers at the same time. For example, tapping Notes with two fingers can bring up a ruler that helps you draw straight mowing lines with a pencil.

Re-pairing Apple Pencil

If simple solutions to the problem did not help, you can move on to more powerful options. For example, re-create the link between Apple Pencil and iPad. For this you need:

  • Go to Settings. Bluetooth and make sure the wireless connection is active.
  • Find Apple Pencil in the My devices section and click on the “i” icon.
  • Select Forget device.

apple, pencil, connect, ipad

  • Connect Apple Pencil to iPad. In the case of a first-generation pen, this requires inserting the Apple Pencil into the Lightning connector on the iPad, and attaching the Apple Pencil 2 to the side of the iPad Pro.
  • Wait for the window with the Create pair button to appear on the screen.

If this does not happen, wait a couple of minutes for the pen to charge a little and reconnect the Apple Pencil to the tablet. The procedure can be repeated several times until the corresponding window appears on the screen.

Tip check

Another reason why the Apple Pencil may not respond well to touch, or not at all, is the tip. The latter is made of a special soft material. This approach allows you to better feel the pressure and moment of contact of the stylus with the display. However, with heavy use, the tip will wear off. At first glance, this may not be very noticeable. But with active use, the tip becomes a little rough, which ultimately affects the usability.

You’re about to sit down at your iPad and brainstorm your next brilliant idea, but notice that the Apple Pencil has stopped working. There are several possible reasons why your Apple pencil is not working. Below are a few troubleshooting ideas to get Apple Pencil back online.

Apple Pencil won’t Pair or keeps Connecting and Disconnecting from iPad in iPadOS 14.4

Is your Apple Pencil not charging? Could the battery on your Apple Pencil be dead? To check if your pencil is charged, follow these steps:

Check the widget view on iPad and look at the battery status. Widgets can be found in the Today view. To get there, swipe right from the home screen, lock screen, or while you’re looking at your notifications.

You should see the Batteries widget. If not, make sure you have it turned on, Bluetooth Pencil setup.

If the battery shows 0%, plug it in, recharge and try again.

As mentioned in the Battery Check section, if your Apple Pencil doesn’t appear in the device list under the battery widgets, or the Battery widget is missing at all, it’s likely Bluetooth is turned off. To check this, follow these steps:

Tap the switch to turn on Bluetooth.

If you can’t get it to turn on, or you see a rotate / load icon, restart your iPad and then try again.

Note: This is also a great way to troubleshoot Bluetooth issues.

If your Apple Pencil won’t pair, or your iPad hasn’t lost pairing, re-pairing Bluetooth may fix your Apple Pencil problems.

Make sure iPad is turned on, unlocked, and Bluetooth is on.

If you see your Apple pencil, you may need to re-pair.

Click Apple Pencil, then select Forget This Device.

Free your Apple Pencil and plug it into the iPad’s lightning port.

Bluetooth Pairing Request dialog box should appear. Click Create Pair to start the pairing process.

If the dialog at the top does not appear, continue looking for additional issues.

If your Apple Pencil behaves erratically or doesn’t work at all, the tip of the pencil may be frayed. Replacing the tip is easy.

Note: Although the tip of a pencil has no exact wear time, many wearers replace it when feel, finish, or functionality begins to diminish. If the finish or feel is rough or gritty, you should replace the pencil tip as it may scratch the surface of your iPad.

Unscrew the tip counterclockwise until it stops.

Replace the old nib with a new one by screwing the nib clockwise until it feels secure in your pencil.

App does not support Apple Pencil

Not all apps fully support pencil. To make sure your Apple Pencil is working, open a known supported app. The Notes app is a solid and great choice for testing your pencil and should be on your home screen. If it is not, you will need to download and reinstall it.

If your Apple Pencil still isn’t working, make sure your iPad supports it. Apple Pencil works with the 2018 9.7-inch iPad and all iPad Pro models. If your iPad is not one of these models, your iPad does not support Apple Pencil and will not work.

It’s easy to install Apple Pencil and start using the stylus!

The Apple Pencil stylus makes iPad Pro truly a pro. With it, you can write and draw quickly and smoothly, and the sensors detect pressure and tilt angles with extreme precision. All you have to do is install it and get started! Everything is incredibly simple, but if you want to study this issue before starting the practical part, full speed ahead!

Restart iPad

If the Apple Pencil battery is more than 50% charged and the pen still refuses to work, the problem may be caused by a software glitch. The easiest way to deal with this problem is to simply reboot the device. In this case, you need to restart the iPad.

READ  Headphones won't connect to my Samsung phone

How to check the battery level on your Apple Pencil

The Apple Pencil does not have a battery indicator — for example, a light that goes from green to red to indicate a low battery. Instead, you need to check the battery power of the stylus on your iPad Pro.

  • Open the Notification Center.
  • Click Widgets at the top right.
  • Check out the Batteries section on the right.

How to charge and connect the Apple Pencil to your tablet

The iPad Pro is the first Apple tablet to feature a stylus. Despite all the advantages of the Apple Pencil, it can be difficult for iOS newbies to connect and charge when using it. Here’s how to connect Apple Pencil to iPad Pro and charge it using a tablet or charging cable below.

apple, pencil, connect, ipad

How to connect Apple Pencil to iPad Pro

It’s easy to connect a stylus to iPad Pro. First, you need to activate Bluetooth in the tablet settings. To do this, open the “Settings” application, select the Bluetooth section and activate the corresponding switch.

Next, remove the cap with the aluminum strip from the Apple Pencil. Hide it carefully so as not to lose it (this happens very often). There is a Lightning connector under the cap, which must be inserted into the corresponding connector on the tablet.

The screen will ask you to create a pair. Confirm your request.

You can check if Apple Pencil is ready to use in the Settings app. To do this, just go to the Bluetooth section and see if there is an accessory with the value “Connected”.

Each time you turn off Bluetooth, the stylus must be reconnected. The connection is restored instantly. Just connect Apple Pencil to iPad Pro and you’re ready to use in a second.

How to charge Apple Pencil

Inside the Apple Pencil is a built-in, rechargeable battery. If the stylus starts to work intermittently, it means it’s time to replenish the battery. Fortunately, the charging process is very quick. There are two ways to charge Apple Pencil.

The first method involves connecting the stylus directly to the tablet via the Lightning connector. According to Apple, 15 seconds is enough to provide half an hour of Apple Pencil, and a few minutes of charging will allow you to use it for several hours.

Checking the charge level of an accessory is very simple. you just need to connect it to your tablet and bring up the Today screen (in the Notification Center) by swiping your finger across the screen from top to bottom. A corresponding widget will appear in the “Widgets” section, indicating the charge level of the iPad Pro and Apple Pencil.

The second method is to use the miniature Lightning-to-Lightning adapter that comes with the stylus. The adapter is often lost, so when not in use it is best to plug it into the cable.

In order to charge the Apple Pencil, you need to use the adapter to connect it to the cable, which in turn connects to the computer via a USB port, AC adapter, removable battery or USB car charger. However, this charging method will take longer than the first.

How to connect Apple Pencil 1 to iPad?

Remove the cap and insert the Apple Pencil into the Lightning connector on iPad. When the Create Pair button appears, click it. Pairing with Apple Pencil persists until you restart iPad, turn on airplane mode, or pair with another iPad.

What to do if Apple Pencil doesn’t work?

How to fix Apple Pencil not working.

  • 1.1 Checking compatibility
  • 1.2 Apple Pencil (1st generation)
  • 1.3 Apple Pencil (2nd generation)
  • 1.4 pen tightening
  • 1.5 Checking Apple Pen Charging.
  • 1.6 Re-pairing Apple Pencil.
  • 1.7 Decrease Opacity
  • 1.8 Disable Zoom Accessibility.

Can I draw with a stylus on a regular tablet?

So can a regular tablet be used as a graphics tablet? Of course! To create beautiful visual content on a non-graphics tablet, it is enough to carry out an easy software upgrade. Everything you need: tablet, internet connection and stylus.

What stylus does Procreate support??

What styluses can I use with Procreate? Apple Pencil is the only stylus currently supported on iPad Pro models. If your iPad is not Apple Pencil compatible, Procreate currently supports the following stylus options: TenOneDesign.

Which iPad can draw Apple Pencil on?

Apple Pencil (2nd generation) can be used with the following iPad models: iPad Air (4th generation) iPad Pro (12.9-inch, 3rd generation) and later iPad Pro (11-inch, 1st generation) ) and later models

Which stylus is right for iPad 2018?

Here’s a list of 10 capacitive stylus pens to look out for.

  • Just Mobile AluPen. Buy for 890 rubles.
  • WACOM Intuos Creative Stylus. Buy for 4 490 rubles.
  • LYNKtec TruGlide Pro.
  • Sensu Brush.
  • Wacom Bamboo Duo2.
  • Ten One Design Pogo Connect.
  • Adonit Jot Pro Stylus.
  • Adonit Jot Script.

Which stylus is right for iPad?

  • Apple Pencil 2 (MU8F2). Best Choice
  • Adonit Dash 3. Best Functional Design
  • Adonit Pixel Pro. Especially for iPad Pro.
  • Logitech Crayon. Best Choice for Artists
  • Adonit Note. Best Ergonomic Design
  • Wacom Bamboo Fineline Smart Stylus. The best choice for
  • Adonit Ink. Comfortable Use

Which iPad is Better in 2020?

Best iPad: Apple iPad Pro (11-inch or 12.9-inch, 2020) The iPad Pro is the absolute best iPad, but it doesn’t come cheap. Unlike the others, it doesn’t have a Home button and Touch ID, but uses the front-facing camera for Face ID like most new iPhones do.

Which styluses are suitable for iPad Pro?

Here’s a list of 10 capacitive stylus pens to look out for.

  • Just Mobile AluPen. Buy for 890 rubles.
  • WACOM Intuos Creative Stylus. Buy for 4 490 rubles.
  • LYNKtec TruGlide Pro.
  • Sensu Brush.
  • Wacom Bamboo Duo2.
  • Ten One Design Pogo Connect.
  • Adonit Jot Pro Stylus.
  • Adonit Jot Script.

Which iPads support the keyboard?

To use the Smart Keyboard, you need an iPad (7th generation), iPad Air (3rd generation), or iPad Pro 9.7-inch, iPad Pro 10.5-inch, or iPad Pro 12.9-inch (1st and 2nd generation).

How to connect Apple Pencil 2 to iPad 2020?

Make sure the Apple Pencil (2nd generation) is attached to the magnetic connector on the right side of the iPad, centered. If you have an Apple Pencil (1st generation), remove the cap and insert the Apple Pencil into the Lightning connector on iPad. Restart iPad and try pairing again.

What are the tablets with a stylus?

  • Samsung Galaxy Tab S6 with stylus
  • Samsung Galaxy Tab S4.
  • Samsung Galaxy Tab A 8.0 with stylus support
  • Huawei MediaPad M5 Lite 10.
  • Microsoft Surface Pro 7 with stylus
  • Microsoft Surface Pro 6 with stylus
  • Microsoft Surface Pro X with Surface Slim stylus.

How to view the charge of Apple Pencil?

When you connect the Apple Pencil (2nd generation), the charge status momentarily appears on the iPad screen. You can see the charge level of Apple Pencil in the Today view on iPad. Just swipe from left to right on the Home screen or Lock screen.

How to connect Apple Pencil 1 to iPad Pro 2020?

Remove the cap and insert the Apple Pencil into the Lightning connector on iPad. When the Create Pair button appears, click it. Pairing with the Apple Pencil persists until you restart your iPad, turn on airplane mode, or pair with another iPad. If necessary, just pair it again.

How to use Apple Pencil with your iPad or iPad Pro

You don’t need to use a dedicated menu or complex pairing process for each app to use Apple Pencil: once you’ve connected it to your iPad or iPad Pro, you’re ready to draw, write, draw, or navigate whichever app you choose. just place Pencil Pen on the glass screen of iPad and reach it!

Get to know the Apple Pencil

If you’ve used a stylus for iPad or other graphics tablets before, you’ll find familiar aspects of the Apple Pencil. and others very different. Here’s a Crash Course on All Apple Pencil Matters for You!

What to do if your Apple Pencil won’t pair | iPad Pro 2018/iOS 12

There are two different versions of Apple Pencil: Apple Pencil (1st generation) and Apple Pencil (2nd generation). If you think their names are too similar, please note that they are both white and nearly the same size. However, it is important to know the difference between the two generations, as neither is supported on all iPad devices.

Apple Pencil (1st Generation) works with:

Apple Pencil (2nd Generation works with:

  • iPad Pro 12.9-inch (3rd generation)
  • iPad Pro 11-inch

If you’re worried about choosing the right generation Apple Pencil, the most distinctive difference is that the 1st generation Apple Pencil has a silver stripe around the top. Apple Pencil (2nd generation) no.

There are some additional distinctive features that are not easy to spot in photographs, but are more obvious in real life. Apple Pencil (2nd Generation) has a matte finish and one flat side. The apple crayon (1st generation) has a smooth, shiny surface and is completely round. The second generation Apple Pencil has the word “Apple Pencil” written on the flat side. The first generation Apple Pencil has a silver stripe. The first generation Apple Pencil has a removable cap that has a Lightning connector that is used to pair and charge the Pencil. The second generation Apple Pencil connects and charges magnetically, so it doesn’t use the Lightning connector (which also makes it about half an inch shorter).

READ  How to connect iPhone headphones to Android

Before you start, make sure you know which generation of Apple Pencil you have. Where there are differences between them (for example, pairing and charging), we have included sections for each generation separately.

How to check battery level on Apple Pencil

Apple Pencil does not have a cylindrical charge indicator or LED indicator on the body; instead, you can check the current battery life on the currently connected iPad or iPad Pro.

How to change features on the second generation Apple Pencil

The second generation Apple Pencil has the added benefit of one additional feature that can be accessed by double-tapping the flat side of the Apple Pencil next to the nib. Most of the time this calls the application’s eraser function.

Application developers can assign a different double-tap action, such as selecting a different artist tool, but so far we’ve seen that this is only used to launch the eraser in most applications other than the Notes application.

In the Notes app, you can change the double-tap function to initiate switching between the current and last used tool, displaying color flavor, switching between the current tool and the eraser, and disabling Apple Pencil 2.

Here’s how to switch the double tap feature on Apple Pencil 2

How to charge the second generation Apple Pencil

For the second-generation Apple Pencil, Apple has made charging a lot easier. There is only one way.

Simply place the Apple Pencil on the wide side of the iPad Pro with a magnetic stripe.

Apple Pencil fast charging technology gives users up to 30 minutes of use after a 15 second charge, but we generally recommend charging the pencil for at least 5-10 minutes. especially if it’s less than 20%. to avoid having to constantly recharge ,

Apple Pencil doesn’t have an eraser. but is fully pressure and tilt sensitive

Unlike Wacom’s patented styli, the Apple Pencil does not offer an eraser: all your basic interactions with the iPad screen take place through the white Pencil tip on the first generation Apple Pencil and with a white nib or double-tap on a flat surface. side of the second generation Apple Pencil.

That’s not to say the pencil lacks a few tricks up its sleeve, however: it is completely pressure and tilt sensitive, which means you can press harder on the screen to get thicker line, or tilt the pencil towards the screen to practically shade. »Picture or draw calligraphic letters.

Some apps, such as Astropad Studio, even offer special combined pencil and touch gestures that are used in the same way as function buttons.

How to charge the first generation Apple Pencil using the Lightning adapter

Plug the Lightning Adapter into your Lightning Cable.

How to pair Apple Pencil with iPad

Before you can start using your Apple Pencil, you need to connect it to your iPad or iPad Pro. 1st and 2nd generation iPad Pros are different, so make sure you know your generation before you start.

Test Apple Pencil on Other Computers

If your iPad is working properly via Bluetooth and detects other accessories, your Apple Pencil may be damaged. To be sure, you need to Look for another iPad to be able to do a test and see if this is related to this or not.

We can also do the opposite and borrow another Apple Pencil and try to pair it with our iPad. Thus, we will be able to find out if there is a bug in the operating system or if the accessory is simply not working properly. If the latter situation occurs, then no doubt you should contact Apple Technical Support to assess the possibility of replacement if covered by the warranty.

Check Bluetooth connection

IPad connects to Apple Pencil (regardless of generation) via Bluetooth. Sometimes we can find some problems in this type of connection and solving them can be really easy. The first thing we have to do in these situations is to restart the iPad completely, and if none of this works, we will go to Bluetooth Settings and check that it is active.

If everything is okay so far, we should check in the preferences window if the Apple Pencil appears in the My Devices section. In some cases, we can see that this section of hardware displays a mirrored Apple Pencil, but it is not actually linked because we cannot use it. To try to fix this problem, simply go to the right side where an “i” icon appears next to the Apple Pencil. When we click on this we can select “Skip device” so the iPad forgets this accessory.

Once we have lowered the device, we can plug it in via the magnetic connector or the Ligthning port. After a few minutes, a window that asks for authorization to link the two computers will definitely appear. Keep in mind that this may take some time, especially if the Apple Pencil is fully loaded. Usually, at the moment when we connect it, the link is not created.

My iPad Won’t Recognize Apple Pencil: How To Fix It

Technology can sometimes give us serious headaches, and something as simple as tying an Apple Pencil for iPad can fail. In such situations, we can find many solutions to link them, and in this article we will try to group them.

Check magnetic connector or lightning port

One of the first aspects we need to check if we have the first or second generation Apple Pencil is the connectors. The first generation Apple Pencil connects to iPad via the Lightning connector. Unfortunately, this can cause some problems and may not properly tie the accessory. In these cases, we must check that there is no lint on the connector, this can interfere with a good connection.

Sometimes, when we put the iPad in a backpack or case, fluff can fall out in these holes. This is the most common problem when connecting the first generation Apple Pencil or even charging the device.

If you have a second-generation Apple Pencil, that will change. The charging connector now has nothing to do with the Apple Pencil, the magnetic connector on the side becomes the protagonist. It is important that when tying the Apple Pencil it is completely centered because if it is moved to one side, the iPad may not recognize it.

Radical solutions

If none of this works, we can come up with the most radical solutions. The last thing we left was to reinstall the operating system of our iPad, as we might be suffering from a software bug.

This operation may ultimately solve the problems we have, but it is obviously the most time consuming. Apart from running out of iPad for a while, some data may also be lost. This is why it is essential to have a backup of all files in iCloud to avoid future problems.

Apple Pencil can be recharged via Lightning cable

The Apple stylus can be charged not only by connecting the stylus to the iPad Pro, but also using the Lightning cable in conjunction with a standard adapter.

Work in applications

The Apple Pencil is capable of performing tasks such as opening applications, scrolling through content in them, navigating, and so on. The Apple stylus is recognized as a finger in this case. The accessory copes with its functions in absolutely all programs, including those that do not support stylus. Also, applications recognize the strength and duration of pressing the stylus on the display.

Apple Pencil does not have an eraser

Looking at the rounded cap might seem like the opposite, but the Apple Pencil doesn’t actually have this feature. You cannot erase the mowing lines drawn by the accessory using the stylus itself. In some programs, the eraser option must be activated by clicking on the corresponding icon or menu item.

Call of Control Center and Notification Center is not available

The operating system does not respond to swipes with the stylus. Thus, there is no way to launch Action Center and Control Center with an accessory. This is an idea of ​​engineers, not a technical limitation.

Third party keyboard support

Third-party solutions recognize touching with a stylus as touching with a finger, so the device can be used to work with absolutely all available keyboards.

apple, pencil, connect, ipad

IPad Pro tablet screen does not recognize palm touch

In order to reduce the strain on the hand, the user can place his palm on the tablet screen, while, for example, scrolling the contents of the window with the Apple Pencil. This feature is available in any programs, including those that are not endowed with stylus support.

Apple Pencil stylus does not work with Slide Over and Split View options

The Apple Pencil stylus cannot activate Slide Over and Split View modes, as there is no support for swipes.

Working with the built-in keyboard

The stylus does an excellent job of typing on the keyboard built into the OS. You can also use Apple Pencil to enter text while working with the Safari browser, Spotlight search, and other applications. The stylus can be used to enter a password when unlocking the gadget.

apple, pencil, connect, ipad

BYRGPUB.COM 2021